注册

Product Finder

设置

Useful links

Live Chat
 
[["US","AU","GB","DE"]]
注册

Turnigy GT-10X 1/10潘租车W /碳纤维底盘(KIT)

Turnigy GT-10X 1/10潘租车W /碳纤维底盘(KIT)

Discontinued Product

Please continue searching for a similar product.
Rating:
Stock:
OUT OF STOCK
重量:
1320
SKU:
9315000091

esc
motor
acc
产品介绍

所有新的Turnigy GT-10X 1/10潘车载加载功能高性能模式。轻巧,超薄的设计使得GT-10X是在弯道非常敏捷和攻击。从沥青地毯,这款车可以处理这一切!

在GT-10X运动的全部,你会期望从高性能的特点1/10潘的车,如球差异后轴,轻质碳纤维底盘,完全可调的前/后悬架和后侧链接,打开电机荚,可调前排弯度/蓖麻和这样的例子不胜枚举!

这款机箱的一大特点是,使安装,调整和无刷电机快速方便的交换的开放式电机设计的吊舱。电动机安装件制成超轻便耐用5毫米CNC铝合金的。它是那么美丽的蓝色面漆,它说:“跳机”外观阳极氧化。

在GT-10X包括伺服安装,将满足大部分标准尺寸的伺服系统,给你一个广泛的转向伺服选项。电池托盘是我们批准的Turnigy纳米技术1S 5000mAh的硬盒lipoly电池吼了完美的结合,并满足其他大多数1S HARDCASE电池组为好。

这款车配备预建的,几乎可以运行,甚至泡沫轮胎和车轮都预安装。您只需要安装你自己的无刷电机,ESC,随动转向和2CH无线电系统(发送器和接收器)是准备打的轨道!

特征:
•轻巧超薄的设计
•高性能后轮差速器球
•完全可调的前/后悬架,包括后方链接
•充油铝浓郁的后避震
•打开发动机舱设计
•3毫米碳纤维底盘结构
•预装配的底盘
•包括彩涂/修整的机身外壳

眼镜:
长度:420毫米
宽度:200毫米
身高:115毫米
:170毫米
轴距:260毫米
电池托盘尺寸:96x50mm
机箱重量:515克(瓦特/没有电子)

包括:
GT-10X泛汽车底盘
彩涂/修整的机身外壳
所有必需的硬件

要求:
2CH发射机和接收机
3650大小无刷电机
无刷电调
标准尺寸随动转向(3KG扭矩或更高版本)
4000〜5000mAh的1S lipoly电池(2S可选)

Product
Specifications

额外信息

  • 商品编号:
    9315000091
  • Brand:
    Turnigy
  • 重量(g)
    1320.00
  • 长度
    445.00
  • 宽:
    135.00
  • 高度:
    230.00
Community
Discussions
Rate&
Review

撰写您自己的评测

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Got my car the other day, not s bad quality car, missing 2 x steering ball studs, oh well easy fix, tyres...replaced with tamiya foam f014 front and rear, replaced spur gear to 48 pitch. Servo saver is weak, replaced, setup car for 1s speed run on a 4.5t motor, and 1s esc, tested and rsn 63mph, 101kph under speed traps, it went dead straight, next time i will crank up boost and timing, overall im happy
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
decent constrruction and drives well, servo saver is a bit soft so steering wont centre properly.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
very good car quality components an absolute bargain but the wheels are not universal meaning that only these wheels will fit apart from that the car is awesome
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Nearly complete. My kit did not include the pinion gear or the servo saver ball connectors. Also, the chassis damper tubes are dry and need lube to work properly. Tires and wheel are non standard and upgrades are unavailable. Handling is good on asphalt. First time out I lost pod chassis link ball connector and side springs, which is unavailable, had to refit with aftermarket components. Alternate spur gear is unavailable. Must use theadlocker on ALL components. I ultimately refitted drive with components from different manufacturer. Good buy if you don't race, or crash.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Bought two of these. One for me and one for my wife. Great little cars. They handle nicely. The servo saver is weak and sloppy so we modded it on each car. Other than that, great cars. We are running 2s lipos in them.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Excellent car! Three important notes I wish someone told me:
- It doesn't come with a motor pinion. Pick out a 25-40 tooth *64pitch* (I had to buy mine at a local hobby store)
- As many have mentioned the tires are horrifically bad. Mine shredded themselves at low speed. I stopped by an autozone and spent 30 minutes trying to find a radiator hose. Buy a Dayco C71593, use a knife to cut and glue with super glue They're actually spectacular as tires.
- Take out every bolt that goes into an aluminum part and add locktight! (that includes most of the bottom screws, everything related to the suspension and motor). Luckily I have extra screws of the right sizes to replace the ones I lost in 3 minutes of early test driving.
- Pro tips: Use some WS2812 LEDs and an ATTiny for great looking headlight/taillights! Partially cut the battery trey to hold a longer 2s battery and use a riser velcro to help hold it in place. Buy a nicer servo-saver. Use a prop balancer to balance the wheels for smoother high speeds.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Great little platform. I was very septical at first, but after all the abuse I've put it through, and running it over 60 mph, I can say this is a great little car for the money. I do suggest ordering an extra set of wheels (or more), replace the servo saver with something stronger, and thread lock every screw! This is well worth the price!!!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Ottima qualit per una macchina da un costo cos contenuto , le gomme fanno pena difatti le cambiano tutti con quelle della tamiya f104 .

Very good machine for the money but tires very bad ....
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I got this kit and it looked great, easy and fast build with a old Novak 540 brushless I had spare. The kits doesn't come with the needed steering ball joints on the servo saver but I already had the needed parts on hand. The ONLY real downside of this kit is the tires that comes with it. They simple wont grip on ANY known surface and the car just spins out. I have hunted all over and have not been able to find any tires that will work on this. I would love to find some rubber tires a little taller so I could use it on the street. The rims are one off kind for the rear so don't expect to walk into a hobby shop and find something that will work as its not gonna happen.

I was able to switch to a 48 tooth pinion easy and found that a Turnigy 2 cell A-Spec 4.2 lipo fits perfect but you been to take off one side of the battery holder, add the battery and replace it. I have no dought this would be a rocket ship if I could find a set of tires that would fit and hook up. If you find a work around for the tires please let me know and thanks.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
everything about this pan car is amazing, only docked a star because the shock dumped its oil.
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
  • Turnigy 1/10 Pan Car

Upload
Files

esc
motor
acc

产品标签

使用空格分隔标签。使用单引号(')标注词组。