注册

Product Finder

设置

Useful links

Live Chat
 
[["US","AU","GB","DE"]]
注册

Turnigy HV-380数码HV-3S伺服10.40公斤/ .030sec /79克

Turnigy HV-380数码HV-3S伺服10.40公斤/ .030sec /79克

Discontinued Product

Please continue searching for a similar product.
Rating:
Stock:
OUT OF STOCK
重量:
169
SKU:
HV380

acc
产品介绍

Turnigy合金的情况下,钛齿轮,具有双重大型轴承高压伺服。
舵机没有得到比这更好!
该Turnigy HV-伺服系统是最好的邦换降压的高性能伺服类别。保证!
为什么过度市场化的伺服浪费钱!?信托Turnigy提供比你的直升机或飞机所需要的性能多。

超级eCCPM /高速伺服循环使用而已。

规范:
死区:0.0008毫秒(默认)
控制系统:+脉宽控制
工作频:1520μs/ 333hz
(RX)要求脉冲:3.5〜7.4伏峰峰值方波
工作电压:8.4〜12.0 V DC电压
工作温度范围:-10〜+ 60摄氏度
运行速度(8.4V):0.040秒/在空载60°度
运行速度(12V):0.030秒/在空载60°度
失速扭矩(8.4V):7.30 kg.cm(101.4盎司/中)
失速扭矩(12V):10.40 kg.cm(144.4盎司/中)
360°可修改:NO
电机类型:空心杯电机
电位器驱动器:间接驱动
驱动程序类型:FET
轴承类型:双滚珠轴承
齿轮类型:钛合金齿轮
可编程:NO
连接器线长度:15.0厘米(5.90英寸)
外形尺寸:40X20X45毫米(1.57x0.97x1.77英寸)
重量:79.1克(2.79盎司)

Product
Specifications

额外信息

  • 商品编号:
    HV380
  • Brand:
    N/A
  • 重量(g)
    169.00
  • 长度
    0.00
  • 宽:
    0.00
  • 高度:
    0.00
  • Unit Weight (g)
    79
  • 扭矩(公斤)(最少0.01公斤)
    10.40
  • 速度(秒/ 60deg ):
    0.03
  • A(毫米):
    50.00
  • B(毫米)
    40.00
  • C(毫米)
    46.00
  • D(毫米):
    21.00
  • E(毫米):
    55.00
  • F(毫米)
    34.00
Community
Discussions
Rate&
Review

撰写您自己的评测

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
These servo drives are designed to operate from 3 cell Li-Po battery. I use these servos on my 700E T-Rex helicopter! For food, I installed the battery is Li-Po 3S 1500mah 20c. For interchanges, I used the bus power supply Power Bus (Skookum Robotics) Food tail servo Align DS650, gyro and receiver I have is BEC lowers the voltage to 6 volts. All very well, but the servo bit heated when I set up a home helicopter actuators heated up very much, I had to give them a cool cutting off the power.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
one of my 3 cyclic servos was broke in flight causing the crash my elyq vision 50 competition. after that i disassemble servo and saw that DC motor is not working due to bended and melted brush. now i don`t know what should i do - sipmply change single broken servo and to hope that it was random and totally seldom event or change all cyclic servos to other tested and approved brand
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I have not installed this servo in my .30 Nitro but I will soon. I hope the tail holds as well as everyone says it will with this and a JR G770 gyro.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
trs bon servo , le top pour mettre au gaz
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I'm using on Align 750 gyro in my Aeuolus 600 and hold PERFECT. I'm doing inverted Huracane without any issues and backward flying, etc.

Is amaizing servo and now I'm testing them in my 27 Sback rudder (push-pull) system. Hablo hispano, porsi tienen alguna pregunta.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
los utilzare en mi t-rex 600 he decidido cambiar de marca ya que align me fallo en 2 ocaciones con servos que dejaron de funcionar, espero tengan un buen desempeo mejor que los align

verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
hv380 is a perfect servo, my rudder is solid rock fast and perfectly center zero subtrim
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Good comment. However the minus does not matter, but there is no + connection allowed between receiver and servo
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Great Servo, powerfull and fast. I use it on my HK600 GT. My solution is to use 3s LiPo wit an 5A ubec. I connect the + from ubec to the receiver and gyro and connect only the signal wir from servos to receiver. The + - wire from LiPo is connected directly to the servo.
verified_user Quality
trending_up Value
playlist_add_check Overall
Upload
Videos
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

acc

产品标签

使用空格分隔标签。使用单引号(')标注词组。