注册

Product Finder

设置

Useful links

Live Chat
 
[["US","AU","GB","DE"]]
注册

Turnigy集成PCB微四(KIT)

Turnigy集成PCB微四(KIT)

Discontinued Product

Please continue searching for a similar product.
Rating:
Stock:
OUT OF STOCK
重量:
199
SKU:
9332000001

esc
battery
motor
acc
产品介绍

这个微小但出色的设计,微型四功能集成的PCB框架,只需用螺栓电机然后焊你6安培ESC选择直接到帧!

还包括一个集成的配电系统制作一个最巧妙的电子安装各地。所有安装硬件和框架组件被包括在试剂盒。所有你需要有在空中这个小怪物为四Turnigy T1811-2900kv电机,四6Amp胚胎干细胞,一套5X3微四道具(2顺时针和2逆时针)的800mAh的2S 7.4V Lipoly电池, HobbyKing多转子控制板和你自己的发射器和接收器(TX / RX)。

特征:
重量轻的设计。
集成的PCB安装组件。
包括全套框架和安装硬件。

眼镜:

飞行重量:145g(不包括RX和电池)
宽度:250毫米
身高:85毫米

需要:
4×Turnigy T1811-2900kv
4×6Amp ESC
4×5×3道具(2CW&2CCW)
1个HobbyKing多旋翼飞行器控制板
1个800MAH 2S 7.4V电池Lipoly
16×M2x8螺栓(电机)
16×M2锁紧螺母(电机)
你自己的广播通道和4通道接收器。

Product
Specifications

额外信息

  • 商品编号:
    9332000001
  • Brand:
    N/A
  • 重量(g)
    199.00
  • 长度
    240.00
  • 宽:
    17.00
  • 高度:
    235.00
Community
Discussions
Rate&
Review

撰写您自己的评测

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
This PCB frame is a piece of crap. It could not survive 30cm fall - after that one motor mount was broken.
This construction has a major design flaw: the hole for motor wires are placed inline with the end of the ribs - which are too short and to thin.

Maybe my frame was faulty, but when You look closer this is not sturdy FR-4

If You must have a microquad, go buy black one with integrated ESC and BEC
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Flew great until I crashed it from 5 feet off the ground. The motor mount is not sturdy and broke clean off. The motor mount design saved a 50 cent prop but cost me a 15 dollar frame.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Fun little quad but kind of a pain to do all that soldering. 34 of them all together including the battery connecter. Plenty of room for a 50mm FC and RX. Indoor flyer for sure.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
It is well made and all, but the construction is deeply flawed. The motor mounts will break off at first impact, since someone made the bad decision to put a hole at the thinnest point. There are only a few millimeters of PCB on each side of the hole. You can easily snap it off without applying much force at all.
If you glue something on top of the hole, the complete arm will break off at the base, tearing the copper laminate. It is easy enough to repair with thin CA and some jumper wires, but the repaired places breaks even easier.
I strongly suggest building your own frame out of some scrap plywood and four 1/16 (8mm) wood spars or buying a more robust frame kit.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Great PCB frame, lightweight with the 1811 - 2900 motors, 5x3 props, KK2 FCB, 2S 800mAh LiPo. About 6 min flight time indoors and fast and mild acro outdoors with 6 mins. I will get a 1300 mAh 2S with my next order, the little beast can handle these LiPos easily. Great for any place at any time flying and having fun.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
very good quad ! good shipping
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Good frame kit, easy to assemble, werry helpful with the onboard pcb for power destribution. Did not fly yet because of propeler problems, hope to get it in the air soon.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
nice and small quad... nice to fly indoors... really impress with the way it was packed!!!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Cool Gadget this Frame but the Motor Extensions are a bit fragile. Just Stiffen the end connections with 2k Epoxy and nothing will break. Even with hard Landings.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
This little frame is delivered in a surprisingly flat envelope! It may seem a bit fragile at first but some of the pieces interlock and a few drops of CA later the frame is quite sturdy.

I like the dome on top that will protect your control board in the event of a crash.

I also like the bars between the legs of the structure where you can easily strap a battery.
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
  • Turnigy Integrated PCB Micro-Quad

Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

esc
battery
motor
acc

产品标签

使用空格分隔标签。使用单引号(')标注词组。