-
产品介绍
-
这是微小但出色的设计微四路2版本，功能更强的集成的PCB框架和电机安装设计，但保留对抽薹的电机一样简单的想法，然后直接焊接你ESC的选择框！
还包括一个集成的配电系统正在为最整洁的电子产品之一，最轻的安装各地。所有安装硬件和框架组件被包括在试剂盒。所有你需要有这个小尺寸微空气中的4个微电机，四6-12Amp胚胎干细胞，一套5X3微四道具（2顺时针和逆时针2）800毫安秒或3秒锂聚合物电池一个HobbyKing多旋翼控制板和你自己的发射器和接收器（TX / RX）。
特征：
•重量轻的设计。
•安装组件集成的PCB。
•包括全套框架和安装硬件。眼镜：
飞行重量：145g（不包括RX和电池）
宽度：250毫米〜220毫米 枢纽中心
身高：85毫米
需要：
4个多星DT1704或Turnigy T1811-2900kv
4×6-12Amp ESC
4×5×3道具（2CW＆2CCW）
1个HobbyKing飞行器控制委员会或45×45毫米安装任何FC
1个800MAH秒或3秒Lipoly电池
16×M2x8螺栓（电机）
16×M2锁紧螺母（电机）
你自己的发射器和4通道接收器。 -
Product
Specifications -
额外信息
-
商品编号:
9332000021-0
-
Brand:
Turnigy
-
容量（mAh）
否
-
重量（g）
96.00
-
长度:
190.00
-
宽:
30.00
-
高度
190.00
-
商品编号:
-
Community
Discussions -
-
Rate&
Review -
petite drone tres facile a monter, dommage, pas difficile pour le monter, mais faut pas de grande main.Sehr sauber gearbeite Teile, auch f?r einen Anf?nger sehr einfach zu l?ten.
Alle Bauteile vorhanden und passgenau.
Put 2 of these frames together for a mini x8 DYS 1306 2300, MS V2 6AMP ESC, naze32 full, 6mm black nylon spacers. super strong. My favorite multirotor to flyI never had luck with this frame. The arms flex a lot. Also there isn't a great amount of room for everything. I scrapped this frame and most of it is now in the garbage can.Perfect setup for a micro quad with easy to set up kit. In just less than an hour the complete electronics was set up and ready to fly with this kit. very light and and robust kit. perfectly laser cut just locks in place all parts.I bought this to replace my V.1 Micro Quad after I had one-too-many hard landings.
It's such an improvement over the original as it allows for through-hole soldering which makes it really easy to install or replace the electronics. There are plenty of additional power take-offs to allow you to add LED's without having to run wires from all over the frame. Also it looks MUCH cooler in black!I never flew with this frame, but is seem to be a good little frame. Weight: 66gI bought this frame as a spare for the white ARTF. Glad i did as i smashed it up! This black frame however seem slightly stronger and holds up better to slight dings. dozens of flights later and it's still working and not been glued! Would buy again for sure!Als Ersatz bestellt da er doch leicht kaputt gehtThis is my first micro quad and I love it. The frame is very well done and I love the black color!
My setup:
4x HK 1811 2000kv (silver motor)
4x HK 10A ESC (simonked)
HK MultiWii AIOP controller
HK Neo 6 GPS
1000mAh 3s 20C battery
It is one small beast! I will upload a video when I have some free time to shoot it. -
Upload
Videos -
Upload
Files -
Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!
Hasse´s Micro Quad with landing gear download now [305kb] Mini X8 download now [3866kb] Mini X8 download now [3866kb] No File Name download now [3135kb] Micro-Quad V2 Fpv download now [2672kb]
- esc
-
-
HobbyKing YEP 7A（1〜2S）无刷调速器（无丝版）
AU$ 15.09 -
TURNIGY毛绒6A /.8bec/6g速度控制器
AU$ 13.43
-
- battery
-
-
ZIPPY Flightmax 800mAh的2S1P 20C
AU$ 7.27 -
Turnigy 800mAh的2S 20C前列包（Parkzone兼容PKZ1032）
AU$ 8.32 -
Turnigy纳米技术850毫安2S 25〜40℃的脂微球包
AU$ 7.17
-
- motor
-
-
Turnigy 1811无刷先驱者2900kv
AU$ 15.84
-
- acc
-
-
XT30电源连接器为30A连续应用（电池侧）（5片装）
Starting from: AU$ 3.23 AU$ 3.92 -
六角锁紧螺母M2 50pc
AU$ 5.57 -
Hobbyking™3叶螺旋桨5X3黑色（CCW）（3个）
AU$ 3.52 -
Hobbyking™螺旋桨5X3红（CW / CCW）（6片）
AU$ 5.06 -
HobbyKing多旋翼控制板V3.0（Atmega328 PA）
AU$ 27.55 -
XT30电源连接器为30A连续应用程序（ESC侧）（5片装）
Starting from: AU$ 3.23 AU$ 3.92 -
内六角螺丝M2x8mm（20片）
AU$ 3.36 -
Hobbyking™螺旋桨5X3黑色（CW / CCW）（6片）
AU$ 5.05 -
TURNIGY超亮LED低电压报警设备
AU$ 13.41
-
