KV：700RPM / V
Unit Weight (g):
Monster motor with very good quality!I fly this motor to a home made Extra 300 3D aerobatic plane 1200 wing spam 1250gr with 2200 4S battery 80A ESC and 15*8 2blade propeller(full throtlle gave me 70A)!I do all the acrobatics with half throtlle!7-8 mins of flying time.With biger battery you may need 100A ESC!The 4S battery is not capable to heat this motor (maybe the ESC a bit)!I will defently buy again this motor!I've purchased several of these for a paramotor project, with a xoar 15x6 prop, turnigy plush speed controller, and 6s battery setup this puts out 18 pounds (8.5~kg) of thrust, drawing 97 amps.I bought this motor to increase the performance of the Riff Raff Reno air racer (also from hobby king that i got off a friend)
It replaced the standard 400kv size motor that took 6s.
I used this motor with 2 x 4S 4.25amp Turnigy Nano-Tech A-spec 65c Rated batteries in series to make 8S and then placed a 10x7 Master Airscrew nvylon prop onto it and then turned my riff raff into a belly lander.
I also tried a 12x8 on same 8S setup but the prop was too large for belly landing, however upon testing it with these configs the performance was Ridiculous!! and the motor wasn't even warm.
I would rate these motors much higher than the NTM series motors which have lots of problems when pushed. However you can push these Air series motors hard and they don't seem to have any issues. Very Very versatile and powerful motor. Impressed with the results, will be putting up videos of my Riff Raff flying soon on you tube as I didn't have a camera man for the first few flights, then you will see the capabilities of the motor with your own eyes.now test the motor
prop apc 15x8 batteries lipo 6s 5000 , static thrust 6,2 kilo
ampere 85/90 ampere watt 1900 .
after 40 sec motor cold esc little hot batteries little hot .
powerful motor.Good engine.real max data 2200kw74a.
Test with APC 15x8 static trust 6.2 kg.with esc hacker 70a.ECS little hot after 1 min.
Reglue the magnet at the first use.
Silent no bearing problem.I ordered this motor and it did not arrive with a prop adapter. Contacted HK who gave me a credit which is nice so I had to make a adapter to work with the motor. Be prepared to do same.This motor is nicely finished. Runns smooth on a low wing aircraft. Specs seem to fit. Comes with accessory pack.Yo tengo 3 motores como este. Todos con lipo 4S. Con una bipala 14x8.5 APC E empuja de un Pilatus Pc-21 de 3900 grs (max 54 Amp). Con una bipala 14x7 APC E empuja de un Texan de 3100 grs (max 48 amp) y con una bipala 13x6.5 de un T-34 Mentor de 2700 grs (max 38 amp). De esta forma es un motor ideal para sustituir un glow 46-52 2T con lipo 4S y 3000-3300 mah.
Buena calidad, potente, resistente y muy silencioso.This is a decent good motor! I'm currently using two of these on an electric scooter, and i can assure you that they can take a beating without the slightest amount of damage.
Once again Turnigy delivers great quality at a reasonable price.run well and on 6s very powerful
T28 download now [2400kb] 14x7E current draw download now [8kb] 14x7E static thrust download now [5kb] 15x6E current draw download now [8kb] 15x6E static thrust download now [5kb] SB96V.oxps download now [18.67Kb]