注册

Product Finder

设置

Useful links

Live Chat
 
[["US","AU","GB","DE"]]
注册
Shipped From:
  • USA
  • Global

Turnigy LD2840A-1800kv无刷电机(400瓦特)

Turnigy LD2840A-1800kv无刷电机(400瓦特)

QTY:

Now save 保存 AU$ 0.00 AU$ 0.00

AU$ 18.74

OR

Rating:
Stock:
重量:
130
SKU:
244000004

Price War

产品介绍


Turnigy LD2840A-1800kv无刷电机(400瓦特)

产品规格:
尺寸:28毫米点¯x40毫米
重量:79克(93克所有接头,连接器及道具驱动程序)
KV:1800RPM / V
电压:7.4V〜14.8V(2S〜4S)
最大功率:400瓦特
最大电流:30A
空载电流:1.0A
轴直径:4mm
推力:800克
ESC:40A

Product
Specifications

额外信息

  • 商品编号:
    244000004
  • Brand:
  • 重量(g)
    130.00
  • 长度
    94.00
  • 宽:
    44.00
  • 高度:
    54.00
  • 千伏(转/ v)的
    1800.00
  • 最大电流( A)
    30.00
  • 功率(W):
    400.00
  • 长度B (毫米):
    40.00
  • 可以长深(mm )
    24.00
  • 最大电压(V)
    15.00
  • 轴(MM):
    4.00
  • Unit Weight (g):
    79
  • 直径C(毫米)
    28.00
  • 总长度E(毫米)
    54.00
  • 电阻( MH):
    0.00
Community
Discussions
Rate&
Review

撰写您自己的评测

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Just received this motor, looks are nice , magnets and coil winding is good. Tested it on my homebuilt balsa plane with 9X6 prop. ,50amp redbrick ESC ,2650 25-50 c 3s turnigy-nano tech battery, the plane flew very nicely. Till now didn't had any problems.
The rating of the motor is for some big planes , but the price value is less and what I have experienced with overloading it with 10X6 E prop. that the motor is good for its price and not according its specs. So if some one is looking for a heavy motor for 1.5-2 kg plane. I personally don't think this motor is for you guys. Invest some more and get the NTM or SK3 class motors.
Overall motor is good for its price and not for its class.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Strong motor, but its shaft is only 3.17 mm.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
i use it with 7x3, 2s 100w, 3s 160w, 4s 250w. it's good! if you want use all power i things that you could try 8x4.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Shaft is weak, I have broken 2 shaft from 4 on my quadrocopter in first flight. There is no spare shafts fot that motor, and I didn't find any identical from another vendors. Nevertheless I have solved my problem with shafts. I went to the local market and bought 3mm reinforced screwdrivers, saw off shaft of needed length, made groove and plate for fixing screw with file and finished diameter with sandpaper. Works much beter than original. Will change another 2 shafts in future.

3 crowns for quality for that issues and overall 4 crowns for good price and good another electrical and mechanical components. You can buy that motors if your hands are in the right place =)
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I bought 4 of these to use with a quadcopter. The motors may be Ok but the hardware stink. As others have said, the collet chuck is for 3 mm shaft but motors have 3.16 mm shafts so you cannot mount the collets on the shaft even if knocking them with a hammer. How can anybody do such a stupid thing and I wonder why HK don't check the supplied hardware. Besides the x-mont is supposed to be mounted on the rear of the motor but the shaft is sticking out on that side. And the front has 3 holes for mounthing a prop adaptor but none is supplied. And I think none is to be found at HK or elsewhere. So don't go for this motor if you want to use it for a quad copter. It is very cheap but not worth the money - spend a few bucks more and get something you can use right out of the box.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I''m running this motor in a Rio EP. It is roughly equivalent to a Traxas 14 volt marine brushed motor in power and RPM,but much more efficient and durable. The shaft is actually 3.17mm in diameter and all four 3mm mounting holes are 16mm on center. I'm running a 3 cell 3300 lippo and a Turnigy 35 amp marine speed control.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I have bought six of them and all the prop adapters were for 3mm shaft. The motor has 3.17mm shaft and in the description is stated as 4mm shaft.

So, consider also buying extra 3.17mm shaft prop adapter.
verified_user Quality
trending_up Value
playlist_add_check Overall
Upload
Videos
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

产品标签

使用空格分隔标签。使用单引号(')标注词组。