注册

Product Finder

设置

Useful links

Live Chat
 
[["US","AU","GB","DE"]]
注册
Shipped From:
  • USA

Turnigy MG959数码合金金属齿轮伺服15千克/75克/ 0.2秒

Turnigy MG959数码合金金属齿轮伺服15千克/75克/ 0.2秒

Discontinued Product

Please continue searching for a similar product.
Rating:
Stock:
OUT OF STOCK
重量:
93
SKU:
TGY-MG959
产品介绍

舵机的疯狂的麦克斯。
从6061合金*单块研磨,该伺服尖叫“疯狂强硬”!
经过研磨的合金MG959因为它的扭矩和鲁棒性进行尽可能多的态度。
为什么要把制造数控铣削铝合金6061伺服,然后它充电不到25块钱?...
Beause就可以了!
R / C扑卡车或飞机坠毁的任何金额将扭曲该伺服的情况。
它包括的配件并具有双滚珠轴承和金属齿轮。

TGY-MG959规范。
控制系统:+脉宽控制1520usec中性
所需脉冲:3-5V峰峰值方波
工作电压:4.8V
工作温度范围:-20〜+ 60℃
运行速度:0.2秒/ 60度,在空载
堵转转矩@ 4.8V 166盎司/英寸(12.0kg.cm)
堵转转矩@ 6.0V:200盎司/英寸(15.0kg.cm)
操作角度:45度。一面脉冲旅游400usec
方向: 逆时针/脉冲旅游1520-1900usec
电机类型: 无铁芯电机
电位器驱动器: 间接驱动
轴承类型: 双滚珠轴承
齿轮式: 所有金属齿轮
连接线长:12英寸
外形尺寸:40.2点¯x20.1点¯x36.8毫米
重量:2.64盎司(75克)

 

*这是后来完成看起来就像是从坯铣不能软合金挤压。 (由对齐与其他直升机,伺服和汽车制造厂普遍的做法,使“CNC”合金零件)

Product
Specifications

额外信息

  • 商品编号:
    TGY-MG959
  • Brand:
    N/A
  • 重量(g)
    93.00
  • 长度
    0.00
  • 宽:
    0.00
  • 高度:
    0.00
  • 速度(秒/ 60deg )
    0.20
  • 扭矩(公斤)(最少0.01公斤)
    15.00
  • Unit Weight (g):
    75
  • A(毫米):
    43.00
  • B(毫米)
    40.00
  • C(毫米)
    38.00
  • D(毫米):
    20.00
  • E(毫米):
    55.00
  • F(毫米)
    26.00
Community
Discussions
Rate&
Review

撰写您自己的评测

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
They have good power , are beautiful and cheap.
But they are not water resistant at all, very bad sealed, are very noisy ,and the front pinion is too weak and break easily on any small crush.- I think they are recomended for crawling only , but not for running cars.- My opinion.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
After reading through all the reviews, most find these servo's are excellent others claim jittering and not centering very well, my findings were excellent when first fitted into a heavy model plane, ailerons started to jitter replaced these and then elevator started to jitter only control surface still fitted after about 20 flights is a pair in pull pull for rudder had 9 of these fitted to an extra 330 and had to remove 6 of these, I have a powerboard fitted and running all servo's on 5.1V they have plenty of current available are their any solutions to this jittering developing problem, it is a very impressive alloy servo has good gearing and mechanically very well built, it is a shame the electronics let it down.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Maybe this review is closed, but will try again, had 9 of these fitted to large scale plane using a powerboard dual redundant battery setup voltage set at 5V with ample current available, they all started out ok, then developed centering flutter, contstant jitter, many others have reported this, has anyone discovered a solution they are a very nice alloy digital servo excellent machanics but electrically very disappointing, any advise appreciated.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I, Like many others are very disappointed with such a lovely looking alloy servos really looks first class, but, simply they start off good and then develope centering and flutter problems, have 9 of these fitted to a large plane and had to eventually remove the lot as they got so bad, the gears and mechanism are first class, the electronics let it down, mine is set up with a powerboard with a regalated power supply of 5V and planty of current available, any ideas of fixing the jittering would be appreciated.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Be warned if using these on planes they start off good then devolope centering problems, jitter or flutter of all control surfaces, very dangerous, on big planes using multiple servos on control surfaces, using a powerboard adj to 5 volts, so no issues with voltage or current and a dual battery setup. speed and torq are very good and gears and construction are excellent reason for purchasing these, the fluttering is the only disappointment, have had to remove all 9 from my plane, I read many others have experienced same results are their any suggestions to fix up such a nice looking servo's electronics.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I have been running 4 of these in a 140 size 2 meter Sukhoi for 12 months and after more than 300 flights, they are working faultlessly.

Thanks HK, a magic servo at a terrific price.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I think next time you get these in stock you should order more than 30 units, they didn't last long this time and I missed out after waiting 6 weeks! ugh.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Estes servos so muito fortes, rpidos e resistentes pois o corpo deles confeccionado em um bloco slido de liga de alumnio muito bom j usamos vrio em helicpteros principalmente para rotor de cauda.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
These servos are very good, use 9 in a heavy model Extra 330L plenty of torq way in excess for unlimited Aerobatics, speed is very good you will have to use these via a power box to get full current don't go over 5V and they will last, or use a bec, have a look inside you will not get a better Servo for this price.Digital and Coreless motors.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I have used this servo for more than 6 months now. What can i say. It has always worked perfectly. It has plenty of torque and speed BUT in order to achieve this you need A POWERFUL BEC! My old ESC used a 5v BEC and when i switched to my new one with 6v BEC, the servo felt like a different one! I believe this is the best servo for the price. PLEASE DO correct me if i am wrong!
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

产品标签

使用空格分隔标签。使用单引号(')标注词组。