注册

Product Finder

设置

Useful links

Live Chat
 
[["US","AU","GB","DE"]]
注册
Shipped From:
  • USA

Turnigy微型电池充电盒

Turnigy微型电池充电盒

QTY:

Now save 保存 AU$ 8.48 AU$ 8.48

Special Price AU$ 22.42 AU$ 22.42

You save 保存 AU$ 8.48 AU$ 8.48

Was  AU$ 30.90

Rating:
Stock:
重量:
156
SKU:
9171000523-0

Price War

battery
acc
产品介绍

Turnigy使微型电池充电与他们的新微型电池充电盒一件轻而易举的事。这个方便的小充电器有十输出,有五个不同的微电池连接器类型前列的快速,方便地充电您的单个单元格。不要担心有错误的适配器,微型电池充电盒涵盖了你对于大多数微型的需求。除了为你的微Lipos输出,还具有充电你的智能手机或其他USB设备的双5V 1A USB输出。对于输入功率,Turnigy MBCB具有双XT60连接器随时接受您的3S 11.1V脂,或用适配器,从12V电源供电它。坚固耐用的模压塑料外壳也具有一定的保护罩,以防止灰尘或损坏充电连接器,而在存储。

简单的红色和绿色LED的提醒您的充电状态。保护你的是反向极性保护。如果输入电池电量低于11V,LED的会提醒你,充电器将关闭在10.5V的输入功率,保护您昂贵的3S前列!

特征:
•总共10个输出,五种不同的连接器类型 - 皮科,E-FLITE MCPX,JST,科尔,莫仕
•双5V 1A USB输出充电手机和平板电脑
•LED灯显示充电状态
•智能充电控制,以保护蓄电池,避免过充,以及每个端口上的极性反接保护
•接受3S 11.1V锂聚合物作为输入功率,或可从12V电源供电
•硬塑料盖保护充电器被存储时

眼镜:
输入功率:12V电源或3S 11.1V Lipoly
最大充电电流:
皮科- 240毫安
E-FLITE / MCP-X - 500毫安
科尔- 420毫安
Molex公司- 500毫安
JST - 900毫安
充电电压:4.2V
重量:135克
外形尺寸:100×85×27毫米

*注:
大多数最新的说明书可以在文件选项卡中找到。

Product
Specifications

额外信息

  • 商品编号:
    9171000523-0
  • Brand:
    Turnigy
  • 重量(g)
    156.00
  • 长度
    110.00
  • 宽:
    30.00
  • 高度:
    90.00
Community
Discussions
Rate&
Review

撰写您自己的评测

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
I bought this on the Black Friday sale. I don't use many 1s lipos, but at that price I couldn't turn it down. Honestly it is a pretty handy little charger for those kinds of things. It does have reverse polarity protection, which you will need as the walkera and molex can be plugged into each other. Honestly, though, I'd rather just have a portable USB charger and one of those multi chargers. They aren't as clean and pretty as this, but it's a more cost effective and useful setup.

My only real complaint is the questionable "feature" I've listed below.
" Accepts 3S 11.1V Lipo as input power, or can operate from 12V power supply" This means if you make an adapter, you can plug the charger into other batteries/wall power adapters...which I feel to be a rather underhanded thing to say, since that's how things work. I feel they need to rewrite that and simply omit the power supply bit. I bought this expecting to be able to plug in a standard power supply lead(the round 5.5OD and 2.1ID style). It mentions "Input Power: 12V Power Supply or 3S 11.1V Lipoly" in the specs as well. Further driving the questionable sales pitch point home. Sure, in the description it mentions "or with a adapter, power it from a 12V power supply", but anyone who's read the box of some battery powered thing, it says "adapter sold separately"
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Surprisingly well thought out and built with independent charge controllers for every outlet and a steal at the Cybersale $4 price!

However as often happens the HobbyKing labelling of small connectors is wrong.

The two outlets labelled JST-XH are not. They are Molex Picoblade 1.25mm connectors as used on all the small 1S 70-180mAh LiPos found in the Elite, Parkzone and Kyosha ultra micro planes. The instructions correctly identify the batteries with pictures, but the label on the charger and in the instructions is incorrect
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
This is a nice little charger, especially if you have multiple different little 1S batteries to charge concurrently (rather than lots of the same connector type). With two USB ports on board, you can often add your original charger as well, to get 3 x batteries of the same type to charge at once. HOWEVER, this charger can be very frustrating when charging from a 12V lead-acid (car) battery, as it will NOT accept much higher than 12V as an input. My freshly-charged second battery in my car will output 13.0V and in doing so, put the charger into 'overvoltage' alarm and it will not work. I have to run my car fridge at the same time to drop the voltage down so that it will actually run! And you can forget about using this from a running car - which will output 13.4~13.6V from the cigarette lighter. I'm having to invest in a buck/boost voltage regulator to go in between my car and this charger to get the required 12V input and have it run reliably.
verified_user Quality
trending_up Value
playlist_add_check Overall
Upload
Videos
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

battery
acc

产品标签

使用空格分隔标签。使用单引号(')标注词组。