注册

Product Finder

设置

Useful links

Live Chat
 
[["US","AU","GB","DE"]]
注册

Turnigy多星30安培多旋翼飞行器无刷电调2-4S

Turnigy多星30安培多旋翼飞行器无刷电调2-4S

Discontinued Product

Please continue searching for a similar product.
Rating:
Stock:
OUT OF STOCK
重量:
34
SKU:
9351000004

acc
产品介绍

销售价格:$ 9.85,送完即止!!!!!!!!!!

多星胚胎干细胞是处于一个梦幻般的价格质量速度控制器!专为简单的安装和设置方便这些胚胎干细胞已被证明在多转子应用程序使用时,能够提供出色的性能。如果您在多转子起步,需要一个易于安装的被测试并证明具有多旋翼航空器那么这些速度控制器,你有没有覆盖的工​​作方案。

这些ESC的功能非常平稳又线性油门响应,在不牺牲快速,清脆,响应任何油门输入。安全性是不是所有的多星Esc键的配备可调节的电池LVC(组电池类型LiXX禁用LVC),电机堵转(过载)保护,信号丢失停机,安全布防遗忘。

所有多星系列ESC的预装有子弹连接器适合于ESC的额定功率处理。这允许插头通过简单地添加适当的电池电源分配器(3,4或6 ESC)和电动机引出线扩展从多星型模块化配套线打的方便。还有什么比这更简单呢?

所有多星ESC的功能,打开大门,可定制的固件的MCU的ATmega - 为那些这样的倾向!或可选择地编程卡可以与快速方便地安装与预闪蒸软件已安装的软件中使用。

请参阅下面的焊料免费的多旋翼电源解决方案,以满足你的下一个多旋翼飞行器项目的相关项目。

细节:
•平滑和线性油门控制
•到油门输入快速响应
•爱特梅尔MCU
•电机堵转保护
•油门信号丢失保护
•安全电(油门锁定)
•支持480Hz的+高刷新率(高达499hz)
•与编程卡兼容

眼镜:
恒定电流:30A
输入电压:2-4细胞Lipoly
BEC: 是(转换 )[删除中间线到dissable]
BEC输出:5.5V / 4A
PWM:8千赫
最大转速:240,000rpm 2极无刷电机
PCB尺寸系统:41mm点¯x24毫米
放电插头: 男3.5毫米子弹连接器
电机插头: 女3.5毫米子弹连接器
重量:29克

用户手册现已为“文件”选项卡下下载。

Product
Specifications

额外信息

  • 商品编号:
    9351000004
  • Brand:
  • 容量(mAh)
  • 重量(g)
    34.00
  • 长度:
    110.00
  • 宽:
    25.00
  • 高度
    100.00
Community
Discussions
Rate&
Review

撰写您自己的评测

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
??????? ??????????? ????, ???????? ? ???????????.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
The price for this ESC is great and one of the selling factors for me. I have 4 of the 20A multistars on my quad. However the 30A I received in the mail did not live up to my expectations. It was dead from the start. For 9 bucks it really is not worth the hassle of trying to have hobbyking correct the issue so I went ahead and cut the heat shrink and immediately found the failed component. I'll just get a Plush to replace this one on my next order.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I am a novice helicopter driver. These speed controllers have survived dozens of crashes. Some of these crashes have broken other components on my quad. but the speed controllers keep going. I am very impressed.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Trs bon ESC, ne chauffent pas et pour l'instant, me convienne en firmware officiel (non SimonK). Je recommande pour les multirotors.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Warning............. if you are going to use these check the voltage output of the bec with a multimeter as I fried 2 kk2.1.5 flight control boards because the esc was putting out 12v instead of the 5.5v its supposed to
and a mate also received one that was doing the same thaing must be a bad batch going around
BUT if you get good ones the are an awesome esc
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Nice ESC, very easy to calibrate with APM. One of my ESCs got fried when i accidentily connected to the power distribution in reverse polarity, ended up frying my APM as well. It would've been nice if they could put reverse polarity protection as many car ESCs have, but since it was never specced, i dont blame HK. It was my own mistake for plugging it anyways. But yeah, nice ESC that is also compatible with Simonk firmware, would recommend.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Find a different ESC I have 3 installed on my tricopterthe and BEC has an 11 volt output and I just fried my second KK2 board before I thought to check the voltage. Only one has an 11V output but they are all coming off and going into the trash.

My fault for not reading the reviews or thinking of checking the BEC voltage before installing my new controller.

Stay away for this ESC
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
recolatori perfetti per droni e naza
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
great ESC, no sign of warming even on hard flights with 17amp motors
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Steer clear of these. I purchased three and all three BEC voltages jumped to 11 volts which burned up my KK2 board and one of my receivers.
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload
Files

acc

产品标签

使用空格分隔标签。使用单引号(')标注词组。