该Turnigy多星outrunners是设计时考虑的一件事 - 最大限度地提高飞行器的性能！它们的特点是高端45SH磁铁，高品质NMB轴承，14个极，定制电动机安装一切皆精度平稳运行的平衡，这些电机的多旋翼飞行器使用专门设计。
KV（RPM / V）：650
道具：10×4.7 - 11×4.7
Unit Weight (g):
after re-soldering all bullet connectors there was no problem, however the material of the cables can be better, is a bit rigid for me.I use this motor in a 1:12 Me 163B aircombat plane at 6S with a 8x6.
Damn fast and much power.
The prop mount is not so nice for an airplane, but it works. My reference motor for aircombat planes up to 800g.what a great power unit, i have these mounted on my tarot fy650 running 11" props and a 4000 4s pack with 18min longest flight (pushing it a bit) very happyRunning these on an Alien 560. Using an Flightmax 5000mah 4s Lipo, 30 amp HK blue ESC's flashed SimonK, 11x.4.7 GemFans, MultiWii Pro FC, FPV transmitter, camera, OSD, etc. AUW 1730grams. Hovers at slightly over half throttle, good power. 10-12 minutes flying time just cruising around.very powerful motors, its a tight squeeze for the prop adapters but I recommend at least 12x6 3 blade props (come as pushers and pullers) from master airscrew.Received mine the last week. Tested with a 10x4.7 with 4S LiPo, not enough thrust.
Mount a spoon style prop 11x4.7 for a good torque.
Very good product for the Talon tricopter !I'm using this motor on my SafeFlight Copters and its giving me 10 minutes of flight time w/ a Nanotech 3000 maH lipo, 10" APC slowfly props, and flying weight of 2500 g. It comes down cool to the touch, same with the DJI 30 amp ESC.I purchased a 850KV and 650KV. 850KV was OK, but 650KV had a bad ball bearing noise and very cheap metal washer of the ball bearing was damaged.
But most issue, is the bad position of the axis when mounting in the bell. It's visible and make some vibrations, magnets are nearly touching the stator.
The other elements are very good and it's really a pity. I hope it's not a common problem and HoobyKing will control this points.buy five motors and one failure the connection of windings, it seems that do not meet the expectations placed on the product, loose terminals and poor soldiers and worm threads unfortunate complete product qualityhis is the equivalent of the well know MT3506-25 but at half of the price , good job HK I just bought 6 :)