New Items 论坛
注册

Total Price

AU$ 0.00

购物车 0 购物车 0 Loading...

Turnigy多星45安培多旋翼飞行器无刷电调2-6S

Turnigy多星45安培多旋翼飞行器无刷电调2-6S

Discontinued Product

Please continue searching for a similar product.
重量:
69
SKU:
9351000005
WANT FREE SHIPPING? Click here to find out more!

多星胚胎干细胞是处于一个梦幻般的价格质量速度控制器!专为简单的安装和设置方便这些胚胎干细胞已被证明在多转子应用程序使用时,能够提供出色的性能。如果您在多转子起步,需要一个易于安装的被测试并证明具有多旋翼航空器那么这些速度控制器,你有没有覆盖的工​​作方案。

这些ESC的功能非常平稳又线性油门响应,在不牺牲快速,清脆,响应任何油门输入。安全性是不是所有的多星Esc键的配备可调节的电池LVC(组电池类型LiXX禁用LVC),电机堵转(过载)保护,信号丢失停机,安全布防遗忘。

所有多星系列ESC的预装有子弹连接器适合于ESC的额定功率处理。这允许插头通过简单地添加适当的电池电源分配器(3,4或6 ESC)和电动机引出线扩展从多星型模块化配套线打的方便。还有什么比这更简单呢?

所有多星ESC的功能,打开大门,可定制的固件的MCU的ATmega - 为那些这样的倾向!或可选择地编程卡可以与快速方便地安装与预闪蒸软件已安装的软件中使用。

请参阅下面的焊料免费的多旋翼电源解决方案,以满足你的下一个多旋翼飞行器项目的相关项目。

细节:
•平滑和线性油门控制
•到油门输入快速响应
•处Atel MCU
•电机堵转保护
•油门信号丢失保护
•安全电(油门锁定)
•支持480Hz的+高刷新率(高达499hz)
•与编程卡兼容

眼镜:
恒定电流:45A
输入电压:2-6细胞Lipoly
BEC: 是(转换)
输出:5.5V / 6A
PWM:8千赫
最大转速:240,000rpm 2极无刷电机
PCB尺寸:50毫米点¯x30毫米
放电插头: 男4.0毫米子弹连接器
电机插头: 女4.0毫米子弹连接器
重量:58克

用户手册现已为“文件”选项卡下下载。

  • SKU 9351000005
  • Brand -
  • 容量(mAh) -
  • 重量(g) 69.00
  • 长度 180.00
  • 30.00
  • 高度 110.00

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Perfect ESC for bigger motors!
Works like charm and no heating issue...
Its very easy easy to setup these devices and I am getting over 23 minutes of mixed flight time with zero heating issue!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Perfect ESC for bigger motors!
Works like charm and no heating issue...
Its very easy easy to setup these devices and I am getting over 23 minutes of mixed flight time with zero heating issue!

wish these came with 3.5mm bullets instead of the 4mm so they can match all the motors I use that need these to run 6s

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

wish these came with 3.5mm bullets instead of the 4mm so they can match all the motors I use that need these to run 6s

Good reliable speed with life-po4 option which is really cool. the programing card is easy to use as well.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Good reliable speed with life-po4 option which is really cool. the programing card is easy to use as well.

I bought 4 of these, one which was bad, however HobbyKings RMA services fixed this problem in less than a week and sent me a new ESC. As far as i am concerned these things work very well with my quad. I have no problems

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I bought 4 of these, one which was bad, however HobbyKings RMA services fixed this problem in less than a week and sent me a new ESC. As far as i am concerned these things work very well with my quad. I have no problems

Received 6 for a Tarot T810 (will disable 5 SBEC's). Although smoother in start up and control than all my fixed wing controllers I flashed them with SimonK firmware and now they're all super smooth/responsive! Used KK flash tool (Downloaded from internet). a USBASP from eBay (HK was BK at the time), an Atmel Atmega socket firmware flashing tool from HK. Selected "dlu40a" as firmware in KK flashing programme screen. and pressed GO!!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Received 6 for a Tarot T810 (will disable 5 SBEC's). Although smoother in start up and control than all my fixed wing controllers I flashed them with SimonK firmware and now they're all super smooth/responsive! Used KK flash tool (Downloaded from internet). a USBASP from eBay (HK was BK at the time), an Atmel Atmega socket firmware flashing tool from HK. Selected "dlu40a" as firmware in KK flashing programme screen. and pressed GO!!

Nice esc quality, will power my 420 kv multistar motor

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Nice esc quality, will power my 420 kv multistar motor

I've got these esc's instaledl on my 640mm DIY hexacopter. I used the multistar programming card to program the esc's, using stock firmware. I've been flying these on my hex for about 4 weeks now, upgraded from turnigy plush 30amp esc's.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I've got these esc's instaledl on my 640mm DIY hexacopter. I used the multistar programming card to program the esc's, using stock firmware. I've been flying these on my hex for about 4 weeks now, upgraded from turnigy plush 30amp esc's.

Excellent multi rotor brushless ESC's. I use them with 35-36 NTM 910 kv motors and I have not been dissapointed with their performance. Works extremely well paired with the multiwii 328P FC and when doing rapid descents performs better than the turnigy plush series ESC's. Will continue to buy these till something better comes out. (Have not seen a need nor have i had the desire to flash them however with purchase of the flashing tool it appears that the process would be very simple.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Excellent multi rotor brushless ESC's. I use them with 35-36 NTM 910 kv motors and I have not been dissapointed with their performance. Works extremely well paired with the multiwii 328P FC and when doing rapid descents performs better than the turnigy plush series ESC's. Will continue to buy these till something better comes out. (Have not seen a need nor have i had the desire to flash them however with purchase of the flashing tool it appears that the process would be very simple.

So good ! It blew the mind of my brushless motor !

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

So good ! It blew the mind of my brushless motor !

This ESC are very good for this money.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This ESC are very good for this money.

  1. 1
  2. 2
Manual - Turnigy Multistar Brushless ESC Download [2384]

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save