New Items 论坛
注册

Total Price

AU$ 0.00

购物车 0 购物车 0 Loading...

Turnigy多星5130-350Kv 16Pole多旋翼飞行器先驱者

Turnigy多星5130-350Kv 16Pole多旋翼飞行器先驱者

Discontinued Product

Please continue searching for a similar product.
重量:
315
SKU:
9392000014
WANT FREE SHIPPING? Click here to find out more!

寻找你的下一个多旋翼飞行器项目最终的动力系统?不要再观望!

该Turnigy多星outrunners是设计时考虑的一件事 - 最大限度地提高飞行器的性能!它们的特点是高端45SH磁铁,高品质NMB轴承,16波兰人,定制电动机安装一切皆精度平稳运行的平衡,这些电机的多旋翼飞行器使用专门设计。

该5130-350包括一个道具适配器和对您的多旋翼飞行器框架上安装快捷方便的内置铝坐骑。一个漂亮的泡沫里面都提供这些电机内衬多星金属盒。

这些多星outrunners已经从地上爬起来的多旋翼飞行器使用而专门设计不是基于飞机马达。


产品规格:
KV(RPM / V):350
锂聚合物电池:6S
最大浪涌瓦特(W):400
工作电流:13安培
最大电流(10秒):16安培
空载电流:0.5安培
内部电阻:0.099欧姆
极数:16
外形尺寸(Dia.xL):51×30mm的
为4mm
建议道具:15×5.5
重量:152克

  • SKU 9392000014
  • Brand MultiStar
  • 重量(g) 315.00
  • 长度 110.00
  • 60.00
  • 高度 75.00
  • 千伏(转/ v)的 350.00
  • 最大电流( A) 16.00
  • 电阻( MH) 0.00
  • 最大电压(V) 22.00
  • 功率(W) 400.00
  • 轴(MM) 4.00
  • 长度B (毫米) 30.00
  • 直径C(毫米) 52.00
  • 可以长深(mm ) 20.00
  • 总长度E(毫米) 35.00

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

I'm going to upgrade this review of this motor. Since we replaced the bearings on all 6 units, we are impressed by the power and efficiency this motor delivers. Running on a 21lb Hex, spinning 16x5 APC props these motors don't even get warm under heavy stress. ESC's are Castle 35A multirotor ESC. It seems to be a perfect match as even the ESC's remain cool.

10Kx2 ma 22v batterys provide 30 minute mission times with a decent reserve.

We made custom tooling for these to get the out-runner can open and to remove and replace the stock bearings with NSK. Custom shims were ground to adjust the pre-load.

With the price reduced to 48 bucks this is a good deal for any project needing heay lifting power on a 22v hex

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I'm going to upgrade this review of this motor. Since we replaced the bearings on all 6 units, we are impressed by the power and efficiency this motor delivers. Running on a 21lb Hex, spinning 16x5 APC props these motors don't even get warm under heavy stress. ESC's are Castle 35A multirotor ESC. It seems to be a perfect match as even the ESC's remain cool.

10Kx2 ma 22v batterys provide 30 minute mission times with a decent reserve.

We made custom tooling for these to get the out-runner can open and to remove and replace the stock bearings with NSK. Custom shims were ground to adjust the pre-load.

With the price reduced to 48 bucks this is a good deal for any project needing heay lifting power on a 22v hex

So sad, This motor is an epic fail...read on
Completely unusable, All 6 motors for my customers Hex have .003 in. axial play in the shaft. Once again, HK goes to great length to provide a superb looking product, Well machined, Well Wound. Only to fail with the bloody top bearing on ALL 6.

These Motor run cool, deliver the rated power and would have been a perfect match if my Hex didn't move. any roll motion caused the motors to vibrate and emit a horrible crunching sound with a serious increase in vibration. I don't trust them as they are. Put them on the shops test stand and the same issue if the assembley was rotated.

Mechanical Play is not an option on a brushless multi-rotor motor this size.

We took a chance on these and now stuck with almost $400 of SCRAP. Due to thier closed can design, bearing replacement is not an option.

Not even going to argue a return, Just will stick to the few thing my business needs that are proven to work with no issues from HK...Lesson learned

~johnny
Aromas Robotics

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

So sad, This motor is an epic fail...read on
Completely unusable, All 6 motors for my customers Hex have .003 in. axial play in the shaft. Once again, HK goes to great length to provide a superb looking product, Well machined, Well Wound. Only to fail with the bloody top bearing on ALL 6.

These Motor run cool, deliver the rated power and would have been a perfect match if my Hex didn't move. any roll motion caused the motors to vibrate and emit a horrible crunching sound with a serious increase in vibration. I don't trust them as they are. Put them on the shops test stand and the same issue if the assembley was rotated.

Mechanical Play is not an option on a brushless multi-rotor motor this size.

We took a chance on these and now stuck with almost $400 of SCRAP. Due to thier closed can design, bearing replacement is not an option.

Not even going to argue a return, Just will stick to the few thing my business needs that are proven to work with no issues from HK...Lesson learned

~johnny
Aromas Robotics

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save