New Items 论坛
注册

Total Price

AU$ 0.00

购物车 0 购物车 0 Loading...

Turnigy多星型USB BLHeli程序员V2 ESC多星

Turnigy多星型USB BLHeli程序员V2 ESC多星

Shipped From:
  • Global

Now save 保存 AU$ 0.00 AU$ 0.00

AU$ 10.45
Alert me
状态:
缺货!
SKU:
9351000056-0
WANT FREE SHIPPING? Click here to find out more!

在多星USB工具,所有V2多星ESC的。打开大门,可定制的固件多星ESC的功能的MCU的ATmega - V2的多星配备了预安装软件BLheli,并为那些如此倾斜这个易于使用的USB工具可通过BLHeli套房GUI配置和更新。这使您可以轻松地反转电机方向不改变电机线,调整设置以包括与同步问题的Hi-KV马达的德马格补偿和时机的主机。

多星胚胎干细胞是在一个梦幻般的价格质量速度控制器!专为简单的安装和设置方便这些胚胎干细胞已被证明在多转子应用程序使用时,能够提供出色的性能。如果你在多转子起步,需要一个易于安装的被测试并证明具有多旋翼航空器那么这些速度控制器,你有没有覆盖的工​​作方案。

要使用的编程工具,只需下载免费的BLHeli套装软件插上USB工具插入电脑并选择COMPORT,接下来从ESC到USB工具连接接收器连接线并关闭电源到ESC。按连接并根据需要调整参数,选择闪存即可大功告成。

注:该工具是多星V2系 ​​列ESC,并与BLHeli套件GUI软件使用,而不是与其它ESC的兼容。

  • SKU 9351000056-0
  • Brand MultiStar
  • 容量(mAh) -
  • 重量 15.0000
  • 长度 60.00
  • Packaging Width 10.00
  • 高度 10.00

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

turnigy buenos productos y bajo costos

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

turnigy buenos productos y bajo costos

Fantastic item, I use it all the time in all places and electronics. Nice n shiny finish, good covering finish.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Fantastic item, I use it all the time in all places and electronics. Nice n shiny finish, good covering finish.

LHeli with 15A Multistar ESC with Multistar USB Tool

- BLHeli: https://blhelisuite.wordpress.com/

- Multistar USB Tool with out reed wiere!

- De Multistar ESC feed with 5Volt from ext.BEC!

-
Settings BLHeli

1. install the driver

2. start BLHeli Suite

3. Select Amtel/Silabs Interface = 1 Amtel BLHeli Bootlader (USB/Com)

4. Plug in USB programmer into your computer

5. Select the correct port: COM xx [USB SERIAL CH340 (COM xx)]

6. Select the correct speed (Baud 9600)

7. Connect ESC plug into USB programmer (without the red cable !!!)

8. Click on Connect

9. Click on ReadSetup and quickly connect Lipo at ESC (you have 2 or 3 seconds)
-
Eanable One Shot in BL Heli


- PWM Frequency/Damping = Light

- Motor Timing = High

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

LHeli with 15A Multistar ESC with Multistar USB Tool

- BLHeli: https://blhelisuite.wordpress.com/

- Multistar USB Tool with out reed wiere!

- De Multistar ESC feed with 5Volt from ext.BEC!

-
Settings BLHeli

1. install the driver

2. start BLHeli Suite

3. Select Amtel/Silabs Interface = 1 Amtel BLHeli Bootlader (USB/Com)

4. Plug in USB programmer into your computer

5. Select the correct port: COM xx [USB SERIAL CH340 (COM xx)]

6. Select the correct speed (Baud 9600)

7. Connect ESC plug into USB programmer (without the red cable !!!)

8. Click on Connect

9. Click on ReadSetup and quickly connect Lipo at ESC (you have 2 or 3 seconds)
-
Eanable One Shot in BL Heli


- PWM Frequency/Damping = Light

- Motor Timing = High

Einwandfreie Funktion mit den 6A V2 Reglern.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Einwandfreie Funktion mit den 6A V2 Reglern.

Works fine.
I read config from my Multistar 10A V2; it was in version 11.7. I flashed with new version 13 of BLHeli and I adjusted some settings. The only trik is to cut the red wire of the USB programmer and to power the ESC from a BEC 5V.

Procedure (to combine with LeBobo's MultistarV2 Pack ) :
1. install the driver
2. start BLHeli Suite
3. Set "ATMEL / SILABS" to "ATMEL 1-Wire Bootloader Interface"
4. Plug in USB programmer into your computer
5. Select the correct port: COM xx [USB SERIAL CH340 (COM xx)]
6. Select the correct speed (Baud 9600)
7. Connect ESC plug into USB programmer (without the red cable !!!)
8. Click on Connect
9. Click on ReadSetup and quickly connect Lipo at ESC (you have 2 or 3 seconds)

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Works fine.
I read config from my Multistar 10A V2; it was in version 11.7. I flashed with new version 13 of BLHeli and I adjusted some settings. The only trik is to cut the red wire of the USB programmer and to power the ESC from a BEC 5V.

Procedure (to combine with LeBobo's MultistarV2 Pack ) :
1. install the driver
2. start BLHeli Suite
3. Set "ATMEL / SILABS" to "ATMEL 1-Wire Bootloader Interface"
4. Plug in USB programmer into your computer
5. Select the correct port: COM xx [USB SERIAL CH340 (COM xx)]
6. Select the correct speed (Baud 9600)
7. Connect ESC plug into USB programmer (without the red cable !!!)
8. Click on Connect
9. Click on ReadSetup and quickly connect Lipo at ESC (you have 2 or 3 seconds)

Works fine.
I read config from my Multistar 10A V2; it was in version 11.7. I flashed with new version 13 of BLHeli and I adjusted some settings. The only trik is to cut the red wire and power the ESC from a BEC.

Procedure (to combine with LeBobo's MultistarV2 Pack ) :
1. install the driver
2. start BLHeli Suite
3. Set "ATMEL / SILABS" to "ATMEL 1-Wire Bootloader Interface"
4. Plug in USB programmer into your computer
5. Select the correct port: COM xx [USB SERIAL CH340 (COM xx)]
6. Select the correct speed (Baud 9600)
7. Connect ESC plug into USB programmer (without the red cable !!!)
8. Click on Connect
9. Click on ReadSetup and quickly connect Lipo at ESC (you have 2 or 3 seconds)

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Works fine.
I read config from my Multistar 10A V2; it was in version 11.7. I flashed with new version 13 of BLHeli and I adjusted some settings. The only trik is to cut the red wire and power the ESC from a BEC.

Procedure (to combine with LeBobo's MultistarV2 Pack ) :
1. install the driver
2. start BLHeli Suite
3. Set "ATMEL / SILABS" to "ATMEL 1-Wire Bootloader Interface"
4. Plug in USB programmer into your computer
5. Select the correct port: COM xx [USB SERIAL CH340 (COM xx)]
6. Select the correct speed (Baud 9600)
7. Connect ESC plug into USB programmer (without the red cable !!!)
8. Click on Connect
9. Click on ReadSetup and quickly connect Lipo at ESC (you have 2 or 3 seconds)

I use this USB programmer with Multistar 10A and I haven't got any problem.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I use this USB programmer with Multistar 10A and I haven't got any problem.

It is not a programmer for Multistar, it is a universal programmer from Multistar.
The stick has always worked with BLHeliSuite, with ANY Atmel based ESC, which has the small 512 bytes BLHeli bootloader flashed over ISP (and which do not have an inverted input, like the Multistar V1 ESC have). It has NOT been specially build for Multistar ESC nor is it somehow bound to work only with Multistar ESC.
All the negative reviews address the Multistar V2 ESC, not the this Multistar programmer.
As far, as it tested, it works great and is easy to use.
The best solderless ready-built adapter for the small 512 bytes BLHeli bootloader (or other 1-Wire AVRootloader solution).

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

It is not a programmer for Multistar, it is a universal programmer from Multistar.
The stick has always worked with BLHeliSuite, with ANY Atmel based ESC, which has the small 512 bytes BLHeli bootloader flashed over ISP (and which do not have an inverted input, like the Multistar V1 ESC have). It has NOT been specially build for Multistar ESC nor is it somehow bound to work only with Multistar ESC.
All the negative reviews address the Multistar V2 ESC, not the this Multistar programmer.
As far, as it tested, it works great and is easy to use.
The best solderless ready-built adapter for the small 512 bytes BLHeli bootloader (or other 1-Wire AVRootloader solution).

Connecting_ESC.png Download [601]

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save