New Items 论坛
注册

Total Price

AU$ 0.00

购物车 0 购物车 0 Loading...

Turnigy纳米技术1200mAh的3S 15〜25℃前列AIRSOFT包

Turnigy纳米技术1200mAh的3S 15〜25℃前列AIRSOFT包

Shipped From:
  • USA
  • Global
QTY:

Now save 保存 AU$ 0.00 AU$ 0.00

AU$ 13.74
状态:
有货
重量:
145
SKU:
NG1200A.3S.15
WANT FREE SHIPPING? Click here to find out more!

当涉及到把回合下来范围内,没有人愿意在消防力量妥协!这就是为什么传说中Turnigy纳米技术的电池,现已为气枪作战。提高电机转速,少电压骤降和延长工作时间等于从你选择的武器更好的性能。

纳米技术气枪系列还配备5C收视率负责把你重新站上前线更快!

获得不公平的优势,并确保你的对手知道他们已经采取了通过纳米技术!

规格。
容量:1200mAh的
电压:3S1P / 3S细胞/ 11.1V
放电:15C恒/ 25C胸围
重量:94克(包括电线,插头和外壳)
外形尺寸:128x17x20mm(每个)
平衡插头:JST-XH
放电插头: 迷你田宫(迷你莫仕)

纳米核心技术的锂离子电池是纳米导电添加剂的应用。

1)纳米的导电添加剂形成其中能增加电子传导性电极超强电子传导网络。
2)这些添加剂创建用于吸液法在载液来提供更多的离子通道一个超强的能力。这提高了离子发射和离子扩散的能力。
通过改善电子导电性和离子传输,阻抗降低,高速率放电的极化下降很大。

优于传统的锂聚合物电池:
-Power密度达到7.5千瓦/公斤。
高倍率放电过程中-less电压骤降,负载下提供更大的功率。
相比于标准Lipoly的3MΩ的-internal阻抗可以达到低至1.2mΩ。
-Greater热控,包通常犯规超过60degC
重载犯规时-Thickness肿胀超过5%,而重载在正常Lipoly的15%。
重放电过程中 - 更高的容量。超过90%,在100%C速率。
- 快速充电能力,最高可达15℃一些电池。
-Longer循环寿命,几乎是标准lipoly技术的两倍

*平衡充电丝的长度可以变化

  • SKU NG1200A.3S.15
  • Brand nano-tech
  • 重量(g) 145.00
  • 长度 127.00
  • 18.00
  • 高度 21.00
  • 容量(mAh) 1200.00
  • 放电(三) 15.00
  • 最大充电速率( C) 5.00
  • 长度-A (毫米) 128.00
  • 高度-B(毫米) 17.00
  • Width-C(mm) 20.00

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

thank you vary vary fast delivery wow

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

thank you vary vary fast delivery wow

Fit well in M4 stock crane style eag.
You can put one in each outside tube
This will allow a spare battery.
Fit well too into AK74U
A must to have for airsoft players.
The only problem is you have to be very very patient.
I bought 2 batteries on May 31st and I finally received it August 12nd

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Fit well in M4 stock crane style eag.
You can put one in each outside tube
This will allow a spare battery.
Fit well too into AK74U
A must to have for airsoft players.
The only problem is you have to be very very patient.
I bought 2 batteries on May 31st and I finally received it August 12nd

good battery but this will fit to APS stock tube(lenght 140mm) but for orther stock like Dboys u must use 1000mAh because this lenght 110mm and you can't use mosfet

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

good battery but this will fit to APS stock tube(lenght 140mm) but for orther stock like Dboys u must use 1000mAh because this lenght 110mm and you can't use mosfet

good LiPo bat for airsoft

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

good LiPo bat for airsoft

Tamao justito para su uso en culatas tipo crane (roza sin llegar a daar el plastico, si se hincha no entra), tambien ideal para guardamanos de SVD y cuerpos de AK (tipo lapiz se sobreentiende)

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Tamao justito para su uso en culatas tipo crane (roza sin llegar a daar el plastico, si se hincha no entra), tambien ideal para guardamanos de SVD y cuerpos de AK (tipo lapiz se sobreentiende)

. cyma - 1200 \ ( 130 \).
* .
.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

. cyma - 1200 \ ( 130 \).
* .
.

nice lipo for my airsoftgun

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

nice lipo for my airsoftgun

GREAT BATTERIESS!!!!!


They came very well balanced (2nd cell was only 0.02v off)

These fit almost all cranestocks, G36 handguards (KWA), buffer tubes and of course, full stocks. They dont fit in M4 handguards (KWA tested) or AK top covers. (Dboys) I have not tried it in Mp5s that have the battery on top, but i imagine they wouldnt fit.

Great batteries!
5/5

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

GREAT BATTERIESS!!!!!


They came very well balanced (2nd cell was only 0.02v off)

These fit almost all cranestocks, G36 handguards (KWA), buffer tubes and of course, full stocks. They dont fit in M4 handguards (KWA tested) or AK top covers. (Dboys) I have not tried it in Mp5s that have the battery on top, but i imagine they wouldnt fit.

Great batteries!
5/5

Very nice product for Airsoft use. You can use it in crain on the back of replica. If it would be 1mm wider or higher it wouldnt fit into the tube.

I do not advice it for any gear. It gives a lot of torque and high rotation speed. You can load the spring up to 160m/s.

I would appreciate if would be possible to made 20mm shorter battery. The power and balance cable should be made of maximal length 25-30mm.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Very nice product for Airsoft use. You can use it in crain on the back of replica. If it would be 1mm wider or higher it wouldnt fit into the tube.

I do not advice it for any gear. It gives a lot of torque and high rotation speed. You can load the spring up to 160m/s.

I would appreciate if would be possible to made 20mm shorter battery. The power and balance cable should be made of maximal length 25-30mm.

* Summary
Very nice LiPo for airsoft guns at a great price! There is absolutely no reason to buy the more expensive Firefox or Flame brands. The main wires are pretty long (slightly over 140mm incl. connector), while the balance tap measures around 80mm. I usually get rid of the Tamiyas and convert them to high-current T-connectors instead.

* Application
One of these stick LiPos fits nicely in a buffer tube if you are using a Magpul MOE stock.

But you can *double* the capacity (ie. to 2400mAh) if you use two of these LiPos in an H&K 416-style crane stock in a parallel configurationwith a parallel adapter, of course, that you can solder on your own. More info here: http://1st-sword.com/forum/viewtopic.php?f=23&t=1810&p=15998#p15998

You can do the same parallel configuration with many other front-wired M4s that still use the *plastic heat shield.* Definitely works in a APS M4, ICS M4, and JG M4 CQB.

This LiPo stick also fits in a G36 handguard.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

* Summary
Very nice LiPo for airsoft guns at a great price! There is absolutely no reason to buy the more expensive Firefox or Flame brands. The main wires are pretty long (slightly over 140mm incl. connector), while the balance tap measures around 80mm. I usually get rid of the Tamiyas and convert them to high-current T-connectors instead.

* Application
One of these stick LiPos fits nicely in a buffer tube if you are using a Magpul MOE stock.

But you can *double* the capacity (ie. to 2400mAh) if you use two of these LiPos in an H&K 416-style crane stock in a parallel configurationwith a parallel adapter, of course, that you can solder on your own. More info here: http://1st-sword.com/forum/viewtopic.php?f=23&t=1810&p=15998#p15998

You can do the same parallel configuration with many other front-wired M4s that still use the *plastic heat shield.* Definitely works in a APS M4, ICS M4, and JG M4 CQB.

This LiPo stick also fits in a G36 handguard.

  1. 1
  2. 2

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save