New Items 论坛
注册

Total Price

AU$ 0.00

购物车 0 购物车 0 Loading...

Turnigy纳米技术1400mAh的3S 15〜25℃前列AIRSOFT包

Turnigy纳米技术1400mAh的3S 15〜25℃前列AIRSOFT包

Shipped From:
  • USA
  • Global
QTY:

Now save 保存 AU$ 0.00 AU$ 0.00

AU$ 15.79
状态:
有货
重量:
162
SKU:
NG1400B.3S.15
WANT FREE SHIPPING? Click here to find out more!

当涉及到把回合下来范围内,没有人愿意在消防力量妥协!这就是为什么传说中Turnigy纳米技术的电池,现已为气枪作战。提高电机转速,少电压骤降和延长工作时间等于从你选择的武器更好的性能。

纳米技术气枪系列还配备5C收视率负责把你重新站上前线更快!

获得不公平的优势,并确保你的对手知道他们已经采取了通过纳米技术!

规格。
容量:1400mAh的
电压:3S1P / 3S细胞/ 11.1V
放电:15C恒/ 25C胸围
重量:115克(包括电线,插头和外壳)
外形尺寸:128x7x20mm(每个)
平衡插头:JST-XH
放电插头: 迷你田宫(迷你莫仕)

纳米核心技术的锂离子电池是纳米导电添加剂的应用。

1)纳米的导电添加剂形成其中能增加电子传导性电极超强电子传导网络。 2)这些添加剂创建用于吸液法在载液来提供更多的离子通道一个超强的能力。这提高了离子发射和离子扩散的能力。通过改善电子导电性和离子传输,阻抗降低,高速率放电的极化下降很大。

优于传统的锂聚合物电池:
-Power密度达到7.5千瓦/公斤。
高倍率放电过程中-less电压骤降,负载下提供更大的功率。
相比于标准Lipoly的3MΩ的-internal阻抗可以达到低至1.2mΩ。
-Greater热控,包通常犯规超过60degC
重载犯规时-Thickness肿胀超过5%,而重载在正常Lipoly的15%。
重放电过程中 - 更高的容量。超过90%,在100%C速率。
- 快速充电能力,最高可达15℃一些电池。
-Longer循环寿命,几乎是标准lipoly技术的两倍。

*平衡充电丝的长度可以变化

  • SKU NG1400B.3S.15
  • Brand nano-tech
  • 重量(g) 162.00
  • 长度 126.00
  • 7.00
  • 高度 21.00
  • 容量(mAh) 1400.00
  • 放电(三) 15.00
  • 最大充电速率( C) 5.00
  • 长度-A (毫米) 128.00
  • 高度-B(毫米) 20.00
  • Width-C(mm) 7.00

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

ottimi di buona qualita plusplusplusplus plusplusplusplus plusplusplusplus plusplusplus plus

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

ottimi di buona qualita plusplusplusplus plusplusplusplus plusplusplusplus plusplusplus plus

best lippo for my airsoftgun..

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

best lippo for my airsoftgun..

(continued)
for tight fitting AEGs. To date, the most extreme setup I have is inside my PDW's rail (After much, MUCH modification) so almost anything is possible. If one had the time you could easily cut and dremmel material to fit inside any rail system. In said PDW, I've ran it 25-30RPS at 360FPS no problem, however I'm currently finishing a DSG build that includes a riot spacer'd SP150 and Lonex titan A2. These should put me at 40-50RPS @ 400FPS if all goes well. I will post another review to see how this little pack handles that setup! Overall, HIGHLY recommend pack!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

(continued)
for tight fitting AEGs. To date, the most extreme setup I have is inside my PDW's rail (After much, MUCH modification) so almost anything is possible. If one had the time you could easily cut and dremmel material to fit inside any rail system. In said PDW, I've ran it 25-30RPS at 360FPS no problem, however I'm currently finishing a DSG build that includes a riot spacer'd SP150 and Lonex titan A2. These should put me at 40-50RPS @ 400FPS if all goes well. I will post another review to see how this little pack handles that setup! Overall, HIGHLY recommend pack!

Quite the little punch from such a small lipo. I ordered both this, and the 1200mah version of this 3s lipo. The only major difference is a VERY slight, and almost unnoticeable thickness difference. I would opt for this lipo.

Uses: Light-moderate upgraded AEGs. If your smart you'd use this lipo in an efficient setup. This rips when paired with a decent AEG, but SHINES when used with a fine tuned gun. This being a lipo, I'd recommend, as I always do when it comes to airsoft replicas and lipos, to invest in a Mosfet. The best mosfet units are actually the hand made ones by people whom know what they are doing, at the time of this review I recommend any unit using the IR3034.

Fitment: Yes, this fits perfectly in Crane stocks. Two cells on one side, and another on the other. There is ample wire, so when you do change the connector to Deans or TX60, I'd recommend shortening the wires. That is preference however. I've also had success fitting these in pretty much every AEG I've tried it with. That includes all types of G36, M4s, Mp5s, etc etc. Very versatile battery pack.


Performance: With an average AEG with an M120 expect solid 20-25RPS, depending on your setup. A tuned AEG can push 30 it all depends on your setup. Being a tech for 6 years I am very confident that this pack can and will meet your needs and expectations.


Extra notes: I personally use this as my go to pack

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Quite the little punch from such a small lipo. I ordered both this, and the 1200mah version of this 3s lipo. The only major difference is a VERY slight, and almost unnoticeable thickness difference. I would opt for this lipo.

Uses: Light-moderate upgraded AEGs. If your smart you'd use this lipo in an efficient setup. This rips when paired with a decent AEG, but SHINES when used with a fine tuned gun. This being a lipo, I'd recommend, as I always do when it comes to airsoft replicas and lipos, to invest in a Mosfet. The best mosfet units are actually the hand made ones by people whom know what they are doing, at the time of this review I recommend any unit using the IR3034.

Fitment: Yes, this fits perfectly in Crane stocks. Two cells on one side, and another on the other. There is ample wire, so when you do change the connector to Deans or TX60, I'd recommend shortening the wires. That is preference however. I've also had success fitting these in pretty much every AEG I've tried it with. That includes all types of G36, M4s, Mp5s, etc etc. Very versatile battery pack.


Performance: With an average AEG with an M120 expect solid 20-25RPS, depending on your setup. A tuned AEG can push 30 it all depends on your setup. Being a tech for 6 years I am very confident that this pack can and will meet your needs and expectations.


Extra notes: I personally use this as my go to pack

What a battery! I really like this in the dboys CASV. They are very slim and able to slip between the barrel and side rails with the middle pack laying flat. Combine this battery with the SHS long torque motor, 120 factory spring and it is a hoss!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

What a battery! I really like this in the dboys CASV. They are very slim and able to slip between the barrel and side rails with the middle pack laying flat. Combine this battery with the SHS long torque motor, 120 factory spring and it is a hoss!

Fits Masada handguards! I know many who own this gun are having problems finding a battery that fits. This one fits fine!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Fits Masada handguards! I know many who own this gun are having problems finding a battery that fits. This one fits fine!

i have 2 of these and just ordered 2 more they will fit the m4 handguard and in a crane stock (1 in the buffer tube,, 1 down each side) they work great ,, the lipo alarm does beep on semi from time to time but doesnt stay on even with a fresh charge ,, i have played for 5 hours shooting over 5000 rounds and the green lights on lipo monitor were still on

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

i have 2 of these and just ordered 2 more they will fit the m4 handguard and in a crane stock (1 in the buffer tube,, 1 down each side) they work great ,, the lipo alarm does beep on semi from time to time but doesnt stay on even with a fresh charge ,, i have played for 5 hours shooting over 5000 rounds and the green lights on lipo monitor were still on

product's dimension & discharge rating is just right for our airsoft rifles.very fast & makes my unit crazy with rate of fire.a must with units with batteries located in their buttstock and quadrailings as their handguards.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

product's dimension & discharge rating is just right for our airsoft rifles.very fast & makes my unit crazy with rate of fire.a must with units with batteries located in their buttstock and quadrailings as their handguards.

This is a fantastic pack. Fits in all current KWA AEGs - crane stock, M4 front, G36 front, full rear.

Excellent ROF and easily pulls M120 springs on stock motors.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This is a fantastic pack. Fits in all current KWA AEGs - crane stock, M4 front, G36 front, full rear.

Excellent ROF and easily pulls M120 springs on stock motors.

I purchased this for a modified Classic Army M4 with a systema magnum motor and a 120 spring. It turns the gun over at 30 rounds per second (measured on audacity) which is exactly the same as my intellect 9.6v 4600 mah large type. This fits perfectly in a crane stock and will last all day.
Excellent buy and cheap enough to get a few just in case.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I purchased this for a modified Classic Army M4 with a systema magnum motor and a 120 spring. It turns the gun over at 30 rounds per second (measured on audacity) which is exactly the same as my intellect 9.6v 4600 mah large type. This fits perfectly in a crane stock and will last all day.
Excellent buy and cheap enough to get a few just in case.

  1. 1
  2. 2

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save