注册

Product Finder

设置

Useful links

Live Chat
 
[["US","AU","GB","DE"]]
注册

Turnigy PRO稳态手万向轴3 KIT

Turnigy PRO稳态手万向轴3 KIT

Now save 保存 AU$ 0.00 AU$ 0.00

AU$ 233.26
缺货!
Rating:
Stock:
OUT OF STOCK
重量:
1140
SKU:
450000111-0

Price War

acc
产品介绍

经过设计和测试的几个月,Turnigy已经在HobbyKing价格带来了专业级产品到群众中去。该Turnigy临稳态手万向节,临至爱好者摄影师。

如果你是从的小短片到YouTube内容制作什么​​的世界里,你知道一个稳定的摄像头钻机的利益,但价格一直是遥不可及的大多数,到现在为止。该Turnigy临手万向节是专门用来处理从一个小型索尼NEX5任何具有无限的可调节和电机选择盛放DLSRs。

万向节是由高品质3K碳纤维和扁平的黑色阳极精密切割数控铝部件制成。随着支撑碳板4mm的和匹配品质的硬件,你可以相信你的装备和投资是安全的。

互联网是充满了支持和视频进行适当的平衡和手万向节调,使得即使是那些没有在航模可以在任何时间成功,使电影魔术。

眼镜:
重量:900克没有马达或控制器
尺寸: 可调(最大370点¯x420点¯x230毫米)
相机最大尺寸: 宽190毫米
推荐汽车:40-90mm无刷电机万向×3(52毫米推荐)
推荐控制器:AlexMos 3轴

*注:这是一种试剂盒,并且不包括电机或控制器,这将需要进行组装和调整为相机设置。

Product
Specifications

额外信息

  • 商品编号:
    450000111-0
  • Brand:
  • 容量(mAh)
  • 重量(g)
    1140.00
  • 长度:
    500.00
  • 宽:
    80.00
  • 高度
    250.00
Community
Discussions
Rate&
Review

撰写您自己的评测

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Ive built and sold several of these, regret my last purchase not going through here. Motor selection is key! Balance is next, then tuning from pitch, to roll then lastly yaw. I use a bluetooth link to my phone to 100pcnt be sure there is no weight difference. Battery charge also makes a big impact during the tune. If it goes away quickly you are constantly tuning againest the clock. The old 8bit I can get decent time on full size dslr, with 32 bit I get 20 mins of good tuning time with the sony nex for a base line on 1300mah 20c. If you feel you are adding more than 100pcnt power, really should check for absolute perfect balance. Remeber the angle of the boom drop can change everything. Used on; 810 tarot, 10 mile hike in my hand. And also small indy films. If you dont build this kind of thing normally, should really consider letting someone. $200 in motors alone misstake can suck. Ive spent hundreds testing for all the applications I do. This isnt a traxxas rustler where you drop in the hop ups and go, there is real setup, and real time invested. Ive taken 4 hours over 5 days to make these stunning.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
compre este gimbal por su bajo pecio, y me parece que en general esta bien aunque me llego con una rosca daada. tambien llega bastante sucio por lo que es mejor lavarlo antes de armarlo para no terminar con las manos negras del polvo. En cuanto al los ajustes para el balanceo me parece que debieron disearlo mejor ya que es algo incomodo la hubicacion de los tornillos que hay que aflojar para poder mover los tubos del marco en la direccion que queramos para balancearlo. La electronica q le puse fue un controlador alexmos 32bit dual sensor, 2 motores turnigy 5208 y 1 turnigy 9017. Al principio fue algo complicado balancear y configurar el gimbal, pero despues que lo logres todo funciona excelente.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I've built two of these gimbals with large motors and 32 bit AlexMos controllers and they work. However, this gimbal does not work well with a large DSLR. The main reason is the walls of the carbon fiber tubing used are very thin (1.0mm thickness), and so the entire lower portion of the frame from the yaw motor down actually flexes slightly when operating with larger cameras. The controller tries to compensate for this, but what ends up happening is you get slight vibrations in the footage, usually on the roll axis. If you look at some of the larger gimbals built from carbon fiber tubing, you will see in photos that the wall thickness of their tubing is slightly greater. All that would have to be done to fix this is to upgrade the tubing from 1.0mm thickness to 2.0mm. This would greatly reduce the flex in the frame. I am in the process of upgrading both of my Turnigy gimbals to 2.0mm thick CF.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Before you buy make sure you can view the 3axis controller as its not showing as a related product, also no switch comes with the controller and they don't show this as a related product, HK don't even reply to posts when you ask where it is? Not a easy product to set up takes about 3 hours to build the gimbal and about another two hours to connect a solder, then you will get to the stage I'm at at trying to connect to the computer in which its not clear how to configure due to HK taking off the 3 axis controller in which the document files are on that page in order to download and click through on the web links to 3rd party websites in order to download drivers etc.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Overall this is worth every penny. Couple of things to note:

- This comes with no screws for the motors. If you buy the 5208 motors they list here you will also need to buy the M3x8 screws since the motors only come with screws for one side. HOWEVER, the M3x8 screws are too long and so I used 2 small washers between the plates and the motors to make them the right length. This also helps so that the c-clip on the motor doesn't rub up against the plate.
- The yaw motor has screws in place so that the motor is mounted upside down. I put new holes in it so that I could mount the 5208 motor right side up < this way the cable sits below the handles and can spin infinitely around the yaw axis without binding.
- When you open the product up there will be a lot of carbon dust over all the parts. You may want to wash them first before assembly. I didn't and my hands turned pretty black by the time I was done.
- It says this in the instructions but since the hardware is aluminum, don't overtighten, you will strip the screws.
- This doesn't come with any stand-offs for the controller or IMU... you will need to provide your own.
- Assembly tip: always slide pieces to the center before you put things on the end of a tube... I had to re-assemble things a few times.

Otherwise this is a great kit. And for the price I'm not complaining.
verified_user Quality
trending_up Value
playlist_add_check Overall
Upload
Videos
  • Turnigy Pro Steady-Hand Gimbal

Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

acc

产品标签

使用空格分隔标签。使用单引号(')标注词组。