-
产品介绍
-
升级与Turnigy ROTOMAX 1.40无刷电机的外转子的1.40焕发大小的发动机型号。这种电机将为无硝基燃料的混乱和麻烦的大型飞机提供清洁和高效的动力。
当与10S Lipoly电池,20x11结合“推进器和一个120Amp ESC的ROTOMAX电机将提供铿锵有力,反应灵敏的功率只有一个电动的设置都可以提供。
这种电机适合于木,碳和电动螺旋桨,轴也被挖掘,以满足4毫米的螺栓,以适合您的选择容易的微调。
规格。
电池:8〜10细胞/ 29.6〜37V
RPM:228kv
最大电流:75A
瓦:2775瓦特
空载电流:37V / 1.25A
内阻:0.029欧姆
极数:24
重量:715克
轴直径:8mm
建议ESC:120A 10S兼容建议道具:20x11 APC
-
Product
Specifications -
额外信息
-
商品编号:
MAX1.40
-
Brand:
Turnigy
-
重量(g)
1184.00
-
长度
205.00
-
宽:
100.00
-
高度:
150.00
-
千伏(转/ v)的
228.00
-
最大电流( A)
75.00
-
功率(W):
2775.00
-
长度B (毫米):
83.00
-
可以长深(mm )
36.00
-
最大电压(V)
37.00
-
轴(MM):
8.00
-
Unit Weight (g):
715
-
直径C(毫米)
80.00
-
总长度E(毫米)
124.00
-
电阻( MH):
29.00
-
商品编号:
-
Community
Discussions -
-
Rate&
Review -
Aprs 10 vols sur un avion maquette de 8 kgrs ce moteur est parfait. Fonctionnement trs silencieux et absence de vibration.
Configuration APC 19*10 10S 5000mAh Env 30 A Puissance env. 1100 W. Une 20*11 serait donc parfaite pour atteindre 2000W pour des vols plus acrobatiques.
After 10 flights this motor run perfectly and whitout any disturbing noise.
Light configuration : APC 19*10, 10S 5000 mAh, Current 30 A, Power roughly 1100 W. This is enough for realistic flight on a 8 kgrs airplane but not for extrem aerobatics
For more aerobatics a 21*11 Propeller should be better.A few weeks ago I bought this engine Along with turnigy dlux 160A After assembly and testing it is squeaking sound.
I tried all the options of the esc has not worked until I changed the Castle Creations 120A
Now works great I do not recommend to combine this engine with this esc because it does not fit.Test on the ground. Rotomax 1.40, Popeller 18 x 10. The TURNIGY K-Force 120A-HV OPTO, and 2 x 5S Zippy 4000 Compact 25C, measured 45 Amps and 1550 watts. The Rotomax makes a good impression.im going too buy this one as a replacment for my KD6328s but im not sure as too why when 2- 5s packs are series up it puts out over 40volts but here it says max 37volts on 10s how does that work?
reason for this one is ive gone up from the MAS 16x10 - 3bladed prop too a biela 18x10 - 3bladed im hoping this motor will spin it as the KD smoked up anyone have any suggestion on my combo?I bought 4 of these for my quad x config. works great and plenty of thrust! im using these on 10s with the TURNIGY K-Force 120A-HV OPTO V2 5-12S ESC'S -
Upload
Videos -
Upload
Files