New Items 论坛
注册

Total Price

AU$ 0.00

购物车 0 购物车 0 Loading...

TURNIGY哨兵40安培速度控制器

TURNIGY哨兵40安培速度控制器

Shipped From:
  • Global
Discontinued Product

Please continue searching for a similar product.
SKU:
TR_S40A
WANT FREE SHIPPING? Click here to find out more!

TURNIGY哨兵40A无刷调速器
哨兵系列BESCs有一个内置的电池保护。
只要把插头插入充电蓄电池的港口BESC可以确保包是平衡的,包不会低于recomended水平。这样可以确保您的包不会被过度放电和摧毁你的电池。
它保护你的昂贵的电池的最佳方式。在大多数情况下,考虑到你的电池比你BESC花费更多,它是一个明智的投资得到一个哨兵。

续电流:40A
瞬时电流:43A
BEC模式:开关模式
BEC:5V / 3A
电压:5.6V〜22V
重量:40g
尺寸:55x28x15mm

用户可编程的,既可以通过控制器和可选的编程卡。编程卡是一个很好的项目,因为它马上告诉用户当前设置和按钮的几个简单的点击,用户可以更改设置,并有这些变化图形的保证。
编程卡是一个很好的项目,简单易用!

电池平衡插头直接连接到我们的HXT,对齐和Dualsky包JST-XH插头。

  • SKU TR_S40A
  • Brand -
  • 容量(mAh) -
  • 重量 65.0000
  • 长度 0.00
  • 0.00
  • 高度 0.00

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

This ESC is simple to set up, especially when using the programmer card. I did have to re-program it one time, for some unknown reason.
However, I was quite disappointed when it burned out last night. I had it on a 48" Zagi, with a 3S lipo, and a Turnigy B2835-2700 and a Master Airscrew 5.5 X 4 prop. It flew well - plenty of thrust, but only lasted about 6 flights or so :-(

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This ESC is simple to set up, especially when using the programmer card. I did have to re-program it one time, for some unknown reason.
However, I was quite disappointed when it burned out last night. I had it on a 48" Zagi, with a 3S lipo, and a Turnigy B2835-2700 and a Master Airscrew 5.5 X 4 prop. It flew well - plenty of thrust, but only lasted about 6 flights or so :-(

Using this for 18 months in a Mini Pulse with a KD A22-20L, and 3s 2200mAh - very happy, never had one issue. It is amazing, the plane saw lots of rough landings from my 7 years old student, 2 big crashes that sent the plane for total rebuilds, but the electronics are working just fine. Very happy with the choice.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Using this for 18 months in a Mini Pulse with a KD A22-20L, and 3s 2200mAh - very happy, never had one issue. It is amazing, the plane saw lots of rough landings from my 7 years old student, 2 big crashes that sent the plane for total rebuilds, but the electronics are working just fine. Very happy with the choice.

I bought this controller for my .25-class models. Great combination with Turnigy 35-42C 1100Kv. Peaks at 45amps - only small rise in temp. Usually fly at 10-30amps where it is cool. I use 4 micro servos BEC peak at Which I'm sure you know total 1.5amps can use with larger servos. Will definitely get more of these. With the motor TR-35-42c-1100 rpm and a blade 11x5 set adapted to these models. Very reliable even when using extremely mild in most it can also be used as a controller for helicopter having the function of the governor system maintains constant main rotor rpm. I recommend it for the low price and of course for its excellent performance.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I bought this controller for my .25-class models. Great combination with Turnigy 35-42C 1100Kv. Peaks at 45amps - only small rise in temp. Usually fly at 10-30amps where it is cool. I use 4 micro servos BEC peak at Which I'm sure you know total 1.5amps can use with larger servos. Will definitely get more of these. With the motor TR-35-42c-1100 rpm and a blade 11x5 set adapted to these models. Very reliable even when using extremely mild in most it can also be used as a controller for helicopter having the function of the governor system maintains constant main rotor rpm. I recommend it for the low price and of course for its excellent performance.

This is my fouvorite esc

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This is my fouvorite esc

Great controler withe a mini balance control for all batteries I use this items for my skywalker, the programming is easy but I prifer the controling card, I use a

14,8V 4S 5000mah 20C zippy flightmax and when I have finish a good flight, I look all cells with my cheap mini voltmeter turnigy and all cells are balancing very amazing and very usefull for my big batteries.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Great controler withe a mini balance control for all batteries I use this items for my skywalker, the programming is easy but I prifer the controling card, I use a

14,8V 4S 5000mah 20C zippy flightmax and when I have finish a good flight, I look all cells with my cheap mini voltmeter turnigy and all cells are balancing very amazing and very usefull for my big batteries.

This a awesome speed controller only wish they had the 30amp also for smaller applications like the Bixler plane. Would never fly again with out cells being monitored, can't remember the last time my batteries went puffy.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This a awesome speed controller only wish they had the 30amp also for smaller applications like the Bixler plane. Would never fly again with out cells being monitored, can't remember the last time my batteries went puffy.

Rock solid reliable ESC. They are a little heavy so not great where weight is an issue. 5 Stars here!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Rock solid reliable ESC. They are a little heavy so not great where weight is an issue. 5 Stars here!

no need for the balance plug..! i never use it.. it adds extra weight..! but its exactly the same as the plush esc.. excellent quality and heavy duty

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

no need for the balance plug..! i never use it.. it adds extra weight..! but its exactly the same as the plush esc.. excellent quality and heavy duty

In the manual, write to connect first balance connector and then plus and then - but try do it with connectors XT60 :) While still working without any problems:)

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

In the manual, write to connect first balance connector and then plus and then - but try do it with connectors XT60 :) While still working without any problems:)

I finally got my helicopter in the air. I've got this ESC with a Typhoon 2215motor, 3 HXT900 servos, a N590 KDS tail servo and a HK501B gyro setup. This ESC is a must for a 450 heli setup especially if you want your batteries to last longer. The direct cell monitor, monitors each cell individually and as soon as one of the cells reaches the set point the ESC slow down the head speed which means land now before you have to auto rotate to the ground. It does give you enough time to bring it in and land it before it slows right down and stops the engine. With the typhoon 2215 motor, timing set to medium and a 12tooth pinion I am reading a optimum head speed of 2850rpm with a lot of torque for 3D or aerobatics.

I only have one suggestion for this product, the battery monitor cable should have been at least 2" longer for better mounting options, but I did manage to connect it to the battery will increase the cable's length at a later stage. As us heli pilots know by this stage the battery normally goes flying through the windscreen of the plastic canopy and would pull this cable with if the connector is not properly mounted. Thank you HK

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I finally got my helicopter in the air. I've got this ESC with a Typhoon 2215motor, 3 HXT900 servos, a N590 KDS tail servo and a HK501B gyro setup. This ESC is a must for a 450 heli setup especially if you want your batteries to last longer. The direct cell monitor, monitors each cell individually and as soon as one of the cells reaches the set point the ESC slow down the head speed which means land now before you have to auto rotate to the ground. It does give you enough time to bring it in and land it before it slows right down and stops the engine. With the typhoon 2215 motor, timing set to medium and a 12tooth pinion I am reading a optimum head speed of 2850rpm with a lot of torque for 3D or aerobatics.

I only have one suggestion for this product, the battery monitor cable should have been at least 2" longer for better mounting options, but I did manage to connect it to the battery will increase the cable's length at a later stage. As us heli pilots know by this stage the battery normally goes flying through the windscreen of the plastic canopy and would pull this cable with if the connector is not properly mounted. Thank you HK

Turnigy ESC Manual Download [1976]

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!