注册

Product Finder

设置

Useful links

Live Chat
 
[["US","AU","GB","DE"]]
注册
Shipped From:
  • Global

Turnigy爪Hexcopter(V1.0)碳纤维车架 - 625毫米

Turnigy爪Hexcopter(V1.0)碳纤维车架 - 625毫米

QTY:

Now save 保存 AU$ 48.34 AU$ 48.34

Special Price AU$ 56.41 AU$ 56.41

You save 保存 AU$ 48.34 AU$ 48.34

Was  AU$ 104.75

Rating:
Stock:
重量:
530
SKU:
9171000060

Price War

esc
battery
acc
产品介绍

该Turnigy鹰爪V1.0 Hexcopter框架是由高品质的真正的碳纤维,同时提供伟大的外观和性能打造而成。我们的工程师着手创建不妥协的Hexcopter框架,几种材料进行了测试和拒绝,直到他们决定,只有真正的碳纤维将满足我们已经开始着手实现的目标。每个组件称重并测定剃须仅仅克,其中能够实现重量轻但非常刚性框架。我们不容许任何妥协,你也不应该。

六角配置的加入提升能力使这个框架适用于携带更大的有效载荷,如摄像系统等电子元器件。这使得一个特殊的摄像机支架或只是特技飞行一个非常灵活和强大的多转子架!

猛禽Hexcopter是从在广受欢迎的龙爪V2四轴飞行器框架使用了相同的高品质的元件构造的,但我们已经重新设计为一个十六进制的配置使用主框架。

在猛禽V2的开发我们的团队把已经广受欢迎的鹰爪框架和研究设计的基础上,从多转子社区的反馈和我们自己的想法,我们重新设计了电机安装板允许对28和35的顶部或底部安装大小无刷外转子电机(见的不同的安装选项参考照片)。改进的夹紧系统单独进行3重新设计,直到我们的工程师们满意的是完美的强度和轻量化的结合已经实现。该中心框架夹持系统的大小几乎翻了一番,以确保每个热潮强大的支柱。该框架的每一个方面进行了彻底检查,并经过深思熟虑。

所有这些对细节的关注导致了简约优雅是达隆Hexcopter,一个十六进制框架,我们是骄傲的把我们的名字背后,你会拥有。

我们还提供全系列的品质多旋翼电子产品,如多旋翼控制板,ESC,电机和多,所以没有必要要么妥协您的电子设置!

眼镜:
重量:440克(W /出电子)
宽度:625毫米
汽车螺栓孔: 一十九分之十六个/ 25mm

要求:
28-XX或35-XX无刷电机的外转子×6
18〜25A无刷电调×6
8,8〜10x4.7螺旋桨×6(3标准/ 3反向旋转)
多转子控制板
2500〜3300mAh的11.1V lipoly
4通道发射机和接收机

Product
Specifications

额外信息

  • 商品编号:
    9171000060
  • Brand:
    Turnigy
  • 重量(g)
    530.00
  • 长度
    260.00
  • 宽:
    60.00
  • 高度:
    123.00
Community
Discussions
Rate&
Review

撰写您自己的评测

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Looks very good quality and sturdy but I haven't built it yet.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Good quality carbon fiber and very lightweight. There is no assembly instruction inside the pack (or may be i have not received it). BTW, I test it with 920 KV motor with 8045 prop. I have enjoyed my first Hex-copter flight without any damage.I forgot to said that, i used CC3D flight controller and multistar bheli 20A ESC. some headless nuts are missing which are important, i used hot glue for this purpose.

Thanks Hk

verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Good frame, don't forget to thread lock the screws. Only complaint I have there isn't any room on the frame to mount anything. I manged to squeeze a gopro on the top, and put the esc on the arms, but it looks bad. I fit the battery underneath, but now I can't put a gimbal on it. Anyway, overall it's a solid frame, but I'd look at a tarot 610 or something instead.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I have been using this frame for about 6 months now and I am VERY happy with it. It is my first 'non-toy' size frame and it has served me well. It does however have some limiting factors so I will list the pros and cons as I see them.
Pros:
Very nice looking clean frame. Happy with the build quality and its looks. It's goes together easily and the flight characteristics are stable and balanced. Kit was complete with nothing missing/damaged/other. Booms were the same length and straight.
Cons:
A screw hole on 1 motor mount threaded when tightening to a boom. So I have put longer screws and nuts on all. I highly recommend doing this to ALL motor mounts where it meets the boom. No issues after that. Space - you run out of it. The gap between the top and bottom plate is only enough for wiring basically and I have since added some extra surfaces to mount the FPV gear.
Tips:
Longer screws and bolts on the motor mount plates where it secures to the boom. Lock-tight all screws. TAKE YOUR TIME putting it together and read the instructions. It is easy to put together but do it once and do it right. Protect the surface that you are building on, the landing gear will scratch it.

I would recommend this frame to anyone looking for a first one to learn on, but you will outgrow it. Saying that, I am awaiting a FPV250 frame which is much smaller and I will keep this as my mid-size frame.
Hope
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
This is a great looking kit. Don't be thrown off by the small box. The only thing that would make this better would be a larger diameter main hub. It's really small, so fitting anything other than the flight controller on there is difficult.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
If you want FPV or a camera, buy the Tarot 680 kit. There's too much missing here to recommend it.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
.















great frame with mainly good points have built a fairly serious one and the only problem I have found is although the frame is extremely crash resistant (have had some very hard ones) the clamps that hold the arms in the centre of the hub have a tendency to come loose so getting them tight takes time as parts settle and a gentle hand for getting the right amount of torque on the little m3 screws without stripping the aluminium tube nuts that hold it together however after a few hours flight and a few crashes parts seem to settle and stay tight AND THE MAIN THING YOU NEED TO KNOW is that the aluminium motor mounts at the end of the arms bend quite easily on high angle crashes while this isn't a problem if you can straighten them without snapping them but they are ten dollars each in the spare parts selection on hk .soooo with a frame selling for 80 dollars its a no brainer to just buy a whole new frame then you get a whole new frame in spares because you WILL bend those motor mounts otherwise a very good frame im happy with mine
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Good workmanship, everything fits well and is quickly assembled.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
This is an extremely nice kit. I own the Carbon Quad, X525, and plastic/glass quad. The Carbon Quad and this Hex Quad are by far superior and worth the extra money.

The carbon fiber is real carbon fiber, not the fake sticker stuff. The metal pieces are super light and work very well. Overall the kit fits together very nicely and is well put together. The 3 motor mount holes makes it easy to fit multiple types of motors. Currently I have the 350KV's on my Hex and the 750 KV's on my Quad. I think I prefer the 750's.

I really like that you can run the motor wires through the arm tubs for a cleaner looking craft. That is a real bonus. Keep in mind that carbon fiber is conductive so you will need to isolate your wire ends with heat shrink, tape or something to protect the leads from shorting against the carbon fiber.

The Hex is quite light for its size and is extremely sturdy. The only thing that would make it better is to have instructions, but it is easily figured out by looking at pics.

PROS:
-Lightweight
-Sturdy
-Looks really good
-Can run motor wires through tubes
-Has 3 motor mount hole configurations
-Ample space for electronics
-Easily assembled
-Can custom adjust configuration

CONS:
-No instructions
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I got the same hex copter u got but the speed controlers I soderd all the black together and the red and wire the goes to the kk2 board to the main deans plug .is that ok or did I mess up.i saw it on u tube that u can soder all the black and red together to the deans plug
or do I need a power board . HELP ME
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
  • Turnigy Talon Hexcopter Frame

  • Talon Hexacoter

Upload
Files

esc
battery
acc

产品标签

使用空格分隔标签。使用单引号(')标注词组。