New Items 论坛
注册

Total Price

AU$ 0.00

购物车 0 购物车 0 Loading...

Turnigy爪四轴飞行器(V2.0)碳纤维车架550毫米

Turnigy爪四轴飞行器(V2.0)碳纤维车架550毫米

Discontinued Product

Please continue searching for a similar product.
SKU:
9171000022
WANT FREE SHIPPING? Click here to find out more!

该Turnigy鹰爪V2四轴飞行器框架是由高品质的真正的碳纤维,同时提供伟大的外观和性能精雕细琢。我们的工程师着手创建不妥协的四轴飞行器框架,几种材料进行了测试和拒绝,直到他们决定,只有真正的碳纤维将满足我们已经开始着手实现的目标。每个组件称重并测定剃须仅仅克,其中能够实现重量轻但非常刚性框架。我们不容许任何妥协,你也不应该。

我们的团队把已经广受欢迎的鹰爪框架和研究的设计,基于饲料从多转子社会和我们自己的想法,我们重新设计了电机安装板,允许28和35的大小无刷外转子电机的顶部或底部安装背面(见附图对于不同的安装选项参考)。改进的夹紧系统单独进行重新设计3,直到我们的工程师们满意的是完美的强度和轻量化的结合已经实现。该中心框架夹持系统的大小几乎翻了一番,以确保每个热潮强大的支柱。我们强调测试的设计,直到5公斤的负载可以在从各起重臂最小弯曲中心板举行。该框架的每一个方面进行了彻底检查,并经过深思熟虑。

所有这些对细节的关注导致了简约优雅是达隆V2,四架,我们是骄傲的把我们的名字背后,你会拥有。

我们还提供全系列的品质多旋翼电子产品,如多旋翼控制板,ESC,电机和多,所以没有必要要么妥协您的电子设置!

眼镜:
重量:280g(W /出电子)
宽度:550毫米
汽车螺栓孔: 一十九分之十六个/ 25mm

要求:
28-XX或35-XX无刷电机的外转子×4
18〜25A无刷电调×4
多转子控制板
2200〜3000mAh的11.1V lipoly
TX和RX

  • SKU 9171000022
  • Brand Turnigy
  • 容量(mAh) -
  • 重量 360.0000
  • 长度 250.00
  • Packaging Width 61.00
  • 高度 123.00
  • Turnigy Talon V2

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Amazing quality comes with high quality parts, would like to see a couple of allen keys included for the screws, overall amazing.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Amazing quality comes with high quality parts, would like to see a couple of allen keys included for the screws, overall amazing.

Great light frame, the only problem is that the aluminum motor mounts bend easily. There's also not a lot of space in the center for anything...

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Great light frame, the only problem is that the aluminum motor mounts bend easily. There's also not a lot of space in the center for anything...

Very sturdy and light!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Very sturdy and light!

Great and lightweight carbon skeleton frame. If you want to fly a "X", you shouldn't use the cut outs in the bottom plate for battery straps because the battery would have an angle about 45 degrees, bad for the balance.

The Installation guide is without notes, make sure you install the booms and mounts in the right direction, the bigger diameter of the booms for motor mount ends. Note that the blocks also have a direction to mount and check you use the right side to screw in the alu blocks and mounts. Pushing the booms with the bigger ends in the blocks will bend them and the mounts won't hold at the thinner ends of booms.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Great and lightweight carbon skeleton frame. If you want to fly a "X", you shouldn't use the cut outs in the bottom plate for battery straps because the battery would have an angle about 45 degrees, bad for the balance.

The Installation guide is without notes, make sure you install the booms and mounts in the right direction, the bigger diameter of the booms for motor mount ends. Note that the blocks also have a direction to mount and check you use the right side to screw in the alu blocks and mounts. Pushing the booms with the bigger ends in the blocks will bend them and the mounts won't hold at the thinner ends of booms.

A bit of an arse to assemble. It seems that some of the carbon fibre parts are slightly different size to others. Almost like some parts were made on a Monday and others on a Friday. I had to use a bit of brute force and ignorance to get the thing together. The screws are pretty low quality and made of soft metal so make sure your allen keys/tools are an exact fit for the screws. Apart from that, once assembled it seems like a very solid and light frame. My Turnigy D2836/8 1100KV out-runners fit directly onto the motor mounts and the cables run nicely through the centre of the booms. I would't really recommend this for an absolute beginner unless they are handy with a few tools to bash and wallop it together.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

A bit of an arse to assemble. It seems that some of the carbon fibre parts are slightly different size to others. Almost like some parts were made on a Monday and others on a Friday. I had to use a bit of brute force and ignorance to get the thing together. The screws are pretty low quality and made of soft metal so make sure your allen keys/tools are an exact fit for the screws. Apart from that, once assembled it seems like a very solid and light frame. My Turnigy D2836/8 1100KV out-runners fit directly onto the motor mounts and the cables run nicely through the centre of the booms. I would't really recommend this for an absolute beginner unless they are handy with a few tools to bash and wallop it together.

I have assembled this quad frame and while it is nice and light and appears to be quite strong I find I am disappointed in it's layout with respect to the positioning of ESC's without it looking like a birds nest!!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I have assembled this quad frame and while it is nice and light and appears to be quite strong I find I am disappointed in it's layout with respect to the positioning of ESC's without it looking like a birds nest!!

Nice frame with good carbon quality and very light but with little room. It is stable and It can handle some crashes. Good frame but expensive.

-
CZ/SK

Dobr rm pre zaiatonkov alebo pokroilch ale ma mal stred pre upevnenie veci (musel som dorba). Zatia nemm ale chcem vyui FOV a Gimbal ale bojm sa e ho nebudem ma kam umiestni kee je celkom mal stred. Rm sa vyzer by celkom kvalitn a pevn s hlinkovmi chytkami pre motoreky. Myslm si e vzhadom na cenu sa viac oplat V1 ako tto V2.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Nice frame with good carbon quality and very light but with little room. It is stable and It can handle some crashes. Good frame but expensive.

-
CZ/SK

Dobr rm pre zaiatonkov alebo pokroilch ale ma mal stred pre upevnenie veci (musel som dorba). Zatia nemm ale chcem vyui FOV a Gimbal ale bojm sa e ho nebudem ma kam umiestni kee je celkom mal stred. Rm sa vyzer by celkom kvalitn a pevn s hlinkovmi chytkami pre motoreky. Myslm si e vzhadom na cenu sa viac oplat V1 ako tto V2.

Awesome frame. Went together easily and in about 25 min. Extremely strong and almost no flexing under stress at the center plate. A little heavy, but excellent when landing.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Awesome frame. Went together easily and in about 25 min. Extremely strong and almost no flexing under stress at the center plate. A little heavy, but excellent when landing.

Esto es un marco muy bueno, fibra de carbono cruzada (dimetro 14 mm, 1 mm de espesor) con placas de carbono 2 mm de espesor para el cuerpo principal. Los soportes del motor y las abrazaderas del brazo son de aluminio ligero , Un motor 28 NTM serie encaja bien. Este kit tambin viene con algunos tornillos de los separadores de nylon para su tarjeta del controlador. solo tienes que utilizar sellador de rosca (loctite 242) este es mi primer quad de excelente calidad y precio

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Esto es un marco muy bueno, fibra de carbono cruzada (dimetro 14 mm, 1 mm de espesor) con placas de carbono 2 mm de espesor para el cuerpo principal. Los soportes del motor y las abrazaderas del brazo son de aluminio ligero , Un motor 28 NTM serie encaja bien. Este kit tambin viene con algunos tornillos de los separadores de nylon para su tarjeta del controlador. solo tienes que utilizar sellador de rosca (loctite 242) este es mi primer quad de excelente calidad y precio

Nice carbon quality but very poor fitting of the tubes in the collars!
The tubes diamaters are MUCH to large so Ive to decide either to grid down the tubes or to bore the collars - so Im really peeved for this!!!
Die Qualitt und Festigkeit der Rohre aus Carbon-Kreuzgewebe macht einen sehr guten Eindruck. Auch die Aluminium Klemmteile sind sauber gearbeitet und wirken hochwertig.
Leider passt keines der Rohre in keine der Aufnahmen!!! Wenn man ein Rohr "reinprgelt", biegt sich die Klemmschelle dermaen auf, dass man mit deren Bruch rechnen kann. Fr DAS Geld sollte man erste Qualitt erwarten knnen. Nun darf ich mich entscheiden, entweder die Rohre abzuschleifen (=> Sollbruchstellen) oder alls Aufnahmen aufzureiben - absolut zum Kotzen!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Nice carbon quality but very poor fitting of the tubes in the collars!
The tubes diamaters are MUCH to large so Ive to decide either to grid down the tubes or to bore the collars - so Im really peeved for this!!!
Die Qualitt und Festigkeit der Rohre aus Carbon-Kreuzgewebe macht einen sehr guten Eindruck. Auch die Aluminium Klemmteile sind sauber gearbeitet und wirken hochwertig.
Leider passt keines der Rohre in keine der Aufnahmen!!! Wenn man ein Rohr "reinprgelt", biegt sich die Klemmschelle dermaen auf, dass man mit deren Bruch rechnen kann. Fr DAS Geld sollte man erste Qualitt erwarten knnen. Nun darf ich mich entscheiden, entweder die Rohre abzuschleifen (=> Sollbruchstellen) oder alls Aufnahmen aufzureiben - absolut zum Kotzen!

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. ...
  7. 7
4Copter Download [2609]
My perspex mounts Download [3630]
No File Name Download [3630]
No File Name Download [32]
No File Name Download [32]
No File Name Download [1675]
all inside 2...better no? Download [569]
my pretty talon...all inside Download [509]
With Naza Lite 01 Download [561]
With Naza Lite 02 Download [671]
  1. 1
  2. 2
  3. 3
  4. 4

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save