注册

Product Finder

设置

Useful links

 
[["US","AU","GB","DE"]]
注册
Shipped From:
  • Global

Turnigy爪Tricopter(V1.0) - 扩展碳纤维臂架(380毫米)(3个)

Turnigy爪Tricopter(V1.0) - 扩展碳纤维臂架(380毫米)(3个)

QTY:

Now save 保存 AU$ 0.00 AU$ 0.00

AU$ 18.13
Rating:
Stock:
重量:
97
SKU:
9171000110

Price War

产品介绍

Turnigy爪Tricopter(V1.0) -扩展碳纤维臂架(380毫米)(3个)

Product
Specifications

额外信息

  • 商品编号:
    9171000110
  • Brand:
    Turnigy
  • 重量(g)
    97.00
  • 长度
    400.00
  • 宽:
    35.00
  • 高度:
    35.00
Community
Discussions
Rate&
Review

撰写您自己的评测

Only registered users can write reviews. Please, sign in or sign up

Quality
Value
Overall
I ordered these as spares that I might need someday. its for sure making talon tri looks bigger compared with the originals.parts quality seems good and the price was ok too. recommended for talon tricopter if you're putting huge motors and big props. with the stock arms I was able to put 14inch props and they're far enough not to show on fpv video, adding any bigger props and I think they'll show unless I changed the arms to the longer version.
Quality
Value
Overall
Quality
Value
Overall
This makes the tricopter so BIG, even with 12 inch props
Quality
Value
Overall
Quality
Value
Overall
Strong but have to grind down a Little to fit tri alu mount kit. but easy fix.
Quality
Value
Overall
Quality
Value
Overall
High quality carbon rods.
As one of the guys said the frame mount side is really hard to get in so I had to sand it a little bit. The motor mount side though wouldn't stay in the motor mount without a coil of electrical tape around the rod.
In general I'm satisfied with this product but requires some inventiveness.
Quality
Value
Overall
Quality
Value
Overall
Im using this to enlarge a turnigy talon hexa
Quality
Value
Overall
Quality
Value
Overall
the talon sistem junction are too weak!
Quality
Value
Overall
Quality
Value
Overall
Not much to say about these besides they are pretty high quality for the price, very stiff.
Quality
Value
Overall
Quality
Value
Overall
These booms make the tricopter more stable.
Quality
Value
Overall
Quality
Value
Overall
13.94mm-13.98mm O.D. These were VERY difficult to get in, make sure the slots are perfectly straight when you start them because after beating them into place with a rubber mallet you definitely aren't going to be turning them... Spread the blocks with the screw by putting the screw in the wrong way around and then put a piece of metal in the slot. When you tighten the screw it will wedge the slot open a bit more and let the arms in *a bit* easier. Basically it just makes it possible without breaking anything. The flex and twist more but that is because they are a lot longer. They make your Tri HUGE, you could put 30 inch props on it without interfering with anything! Actually with only 12" props it looks kinda silly. I'm running plush 40s, 35-36 NTMs on mine with either 11X4.7 for hovering or 12X6 for fast forward flight. I get about 20 mins of hover on turnigy 3s 5000mah battery and it handles the 8000 fine. (I got bored so I didn't fly a whole 8A batt yet).
Quality
Value
Overall
Upload
Videos
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

产品标签

使用空格分隔标签。使用单引号(')标注词组。