注册

Product Finder

设置

Useful links

 
[["US","AU","GB","DE"]]
注册

Turnigy TrackStar天才120A无刷短途卡车ESC

Turnigy TrackStar天才120A无刷短途卡车ESC

Now save 保存 AU$ 0.00 AU$ 0.00

AU$ 80.44
缺货!
Rating:
Stock:
OUT OF STOCK
重量:
205
SKU:
9052000061-0

Price War

产品介绍

该Turnigy TrackStar 120A短期课程ESC是最新加入到我们的TrackStar ESC范围。它与4极电机正在成为颇为流行的短期课程卡车类进行了优化,当然与任何传感器无刷电机车运行良好。

使用快速Silicon Labs的MCU和高品质的导通半导体的MOSFET的TrackStar 120A SC ESC套在高品质的新标准又买得起车的胚胎干细胞。随着智能MCU逻辑TrackStar系列胚胎干细胞可以非常精确的启动,从电机控制和定位反馈。这转化为非常流畅的启动和加速。

该Turnigy TrackStar 120A SC ESC还拥有通常不会在这个价位的ESC发现编程选择一台主机,可以很容易通过Turnigy TrackStar编程卡编程(另售)。该Turnigy TrackStar 120A SC ESC还包括3×12AWG电机线和2×12AWG电源输入线。

特征:
•120A连续​​电流/ 760A突发
•带传感器/传感器运行
•2〜4S LiPoly有能力
•时序LED指示灯(的Blinky模式)
•ESC过热保护
•可调升压和Turbo计时
•可调刹车和拖刹
•PC可编程

眼镜:
恒/瞬时电流:120A / 760A
电机兼容性: 无刷有传感器和传感器
汽车兼容性:1/10 SCT或怪物,SCT 1/8或越野车
电动机极限:
6S镍氢或2S LiPoly:KV <6000
7〜9S NiMH或3S LiPoly:KV <4000
10〜12S NiMH或4S LiPoly:KV <3000
阻力位:0.0003ohm
电池数:6〜12S镍氢或2〜4S LiPoly
BEC输出:6V @ 3A
外形尺寸:57x38x35mm
重量:82克(不含导线)

*注*以上是一些关键的编程选项列表。与PC软件一起使用时有更多的选项(需要TrackStar多功能智能编程盒)。请参见下方的“文件”选项卡中的全部细节下的用户手册。 TrackStar链接PC软件也可用于“文件”选项卡下下载。

Product
Specifications

额外信息

  • 商品编号:
    9052000061-0
  • Brand:
    TrackStar
  • 重量(g)
    205.00
  • 长度
    160.00
  • 宽:
    45.00
  • 高度:
    110.00
Community
Discussions
Rate&
Review

撰写您自己的评测

Only registered users can write reviews. Please, sign in or sign up

Quality
Value
Overall
I would recommend using the 2.06 version of the USB program. It is easier to use. the only gripe i have is that it does not support boost mode and the turbo mode does not work at all. It makes the motor jump for a split second then do nothing. If you use it for just blinky like me its fine. Will probable upgrade to a RX8 someday. Great beginner esc.
Quality
Value
Overall
Quality
Value
Overall
Thought I would try this in one of my RC's. Nothing but trouble with this esc. Goes WOT when it wants to causing more damage than I would have spent on a high end esc. Usb programming is always a pain with it. Sometimes refuses to move... I could go on.
Quality
Value
Overall
Quality
Value
Overall
Excellent esc, smooth, responsive and this esc has a8.5 brushless motor, and when I finish with my race, this esc is still cool, and some of the more expensive one's are blowing heat offof them! Very impressed!
Quality
Value
Overall
Quality
Value
Overall
This esc would be perfect for an 1/8 scale 2wd running a 3 or 4 cell lipo. Does not start up a 1/10 scale 17.5 2wd sct on 2 cell. Also won't fit in a 1/10 scalemid motor buggy. oncertainly you have vehicle rolling it has great punch and power.
Quality
Value
Overall
Quality
Value
Overall
I have to admit I was a little hesitant to order a HK ESC, however I have been pleasantly surprised. I would say that my Turnigy SCT 2WD seems faster running this vs my Airtronics Super Vortex Zero which died. I am certainly happy with it and it is a blast running the truck on 3s on occasion. Running a Tekin 17.5t Redline motor which is sufficient however I do experience minor cogging at low speeds from time to time.
Can't leave 5 Crowns for quality because it's brand new but if it lasts the test of time 5 Crowns is definitely warranted.
The biggest drawback is the Program Box is not available in the US. I ordered it from the Global Warehouse and while it will program the ESC and it does nicely with plenty of programming features to adjust what I wanted it WILL NOT connect to my PC which is running Windows 10 or in compatibility mode of any older OS. That is very disappointing as I much prefer to program from the PC like my Tekin's and Mamba Max Pro.
I don't race, don't advance timing or anything of that nature so I'm of no help there but I would recommend this ESC as a mid budget ESC for sensored motors. I don't run sensorless so can't help you there either.
Quality
Value
Overall
Quality
Value
Overall
Not dissapointing at all. For the cost its worth every cent. Gone thur 3 packs and motor(10.5T trackstar) was cooler then a 8.5t hobbywind xerun combo. Not to mention the power it had. Just wonderful. Using it in a hpi ese blitz with a 48t spur and 17t pinon and still had lost of power to spare. Just a glitch early on, mostly probably due to the charging of the capacitors. But else was smooth sailing. Just hope the instructions were more detailed.
Quality
Value
Overall
Quality
Value
Overall
Very good esc. I pair it with TrackStar 540 4-pole 4250kv motor and they give my SCT plenty of power. Very smooth both low and high speed. I waterproof both with varnish and I can dive my SCT into water without problem. I currently tested it up to 80km and planned to test it >100km with a higher pinion gear. The only area to be careful - the plastic is a bit week and must be careful when you do maintenance especially when you screw. 100pcnt recommended.
Quality
Value
Overall
Quality
Value
Overall
Not to happy with this ESC I bought this along with the 4.5 turn track star 4x4 motor and have had nothing but overheating problems since I Got it I run a losi scte w/mip upgraded chassie the book calls fo a 14 tooth pinion. I cant even run a 12 tooth with out over heating it wont take an 11 tooth. it has the stock spur gear on it and yes every thing in the truck is rotating fine no binding what so ever. should have bought another tekin guess this is what I get for buying cheap motors and ESC's you get what you pay for.
There is also no timming put in the motor at all. took out all the drag brake hoping this would help. Guess what still over heating on a 8 min. main 200 degrees coming off the track I am only running 85pcnt on my controller also. I will not run this set up again till hobby king figures out whats going on guess I am out 130.00 Bucks
Quality
Value
Overall
Quality
Value
Overall
I have tried now with the programming unit to fix the starting issue. It sputters the motor and will not move with a load on the motor. If I pick up the car, it will spin the motor. This is using a nanotech 2cell lipo saddle pack. I resoldered all the connections, adjusted the sensor on the motor, cleaned all the cables and contacts, adjusted the gear mesh from motor to spur, calibrated the esc, adjusted all the endpoints and centers on my transmitter, nothing worked to fix the sputtering and not moving from a stop. I plugged a 3 cell in and did not have this problem. The 3 cell does not fit in my vehicle and is not allowed for racing. I plan to either buy a new controller or send this back.
Quality
Value
Overall
Quality
Value
Overall
I put this in my DESC410 SCT with the Trackstar SCT 5.5T motor. It comes stock with forward and brake only. Calibration takes a few tries for it to stick. I have problems with the motor starting from a stop. It will shake a bit and not make a full rotation. The fan works most of the time but will stop when the unit is rotated, probably due to gyroscopic effects and bad bearings. I will have to cut the fan housing off to upgrade it because I don't want to re-solder all the wires. The fan mount also keeps the 2 piece cover together. I have ordered the programming unit but it is only in the int. warehouse so don't have it yet.
Quality
Value
Overall
View all reviews
Upload
Videos
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

产品标签

使用空格分隔标签。使用单引号(')标注词组。