注册

Product Finder

设置

Useful links

Live Chat
 
[["US","AU","GB","DE"]]
注册

Turnigy TrackStar一个单元格120A 1/12和1/10规模有感无刷汽车ESC

Turnigy TrackStar一个单元格120A 1/12和1/10规模有感无刷汽车ESC

Discontinued Product

Please continue searching for a similar product.
Rating:
Stock:
OUT OF STOCK
重量:
180
SKU:
TTS-120A-1S
产品介绍

截杀销售是$ 59.99现在只需$ 39.99,送完即止!

该Turnigy TrackStar一个单元格1/12和1/10的规模ESC是最新加入到业余爱好国王传感器,汽车ESC范围。

该TrackStar一个单元格拥有一个内置的升压为1/12和1/10规模的赛车单细胞Lipoly使用。一个额外的散热片和散热风扇已包含2S 1/10的比赛应用程序,使TrackStar一个单元格成为真正的多功能ESC。

使用快速Silicon Labs的MCU和高品质的导通半导体的MOSFET的TrackStar一个单元格120A ESC套在高品质的新标准又买得起车的胚胎干细胞。随着智能MCU逻辑TrackStar系列胚胎干细胞可以非常精确的启动控制和定位进给从电机回来。这意味着到非常流畅的启动和加速。

时序LED指示灯。
与轰鸣的运动员类赛车符合规则,协助赛事组织者监控非计时赛修饰类TrackStar 1/10 ESC包括时序模式指示灯LED驱动器合规性。在任何时候,当ESC上电和电动机的动态时序设置为一个值大于零的白光LED将照亮指示定时模式已被修改。

该Turnigy TrackStar一个单元格120A ESC还拥有一台主机的编程选项通常不会在ESC在这个价位找到,可以轻松通过Turnigy TrackStar编程卡(另售)进行编程。

规范:
续电流:120A
瞬时电流:200A
电机转动: 正转/反转或正转/ BRK
输入电源(电池):1-2S锂聚合物/生活,镍氢3-6(8.4V最大)
电机类型: 传感器与无传感器无刷电机。
BEC输出:6.0V,1安培,内置BEC与DC升压1锂聚合物电池使用。
状态指示灯(2个LED) 白光LED,3色LED(红,绿和橙色)
热过载保护:
外形尺寸(L * W * H /无风扇):36.5 * 42 *18毫米(1.44 * 1.65 * 0.71in)
重量(不含线):34克(1.20盎司)

电动机极限
1S锂聚合物电池或镍氢3-4S):≥3.5T(1/12导通路)
2S锂聚合物电池或镍氢5-6S): 在道路上≥4.5T(1/10)≥6.5T(1/10越野)*

编程选项(通过可选的编程卡或者油门输入)
制动/反向型
制动量
反向量
冲床控制
拖刹
油门死区
电压切断
电机调速

注:* 2S Lipoly使用需要安装附带的散热片和风扇。

Product
Specifications

额外信息

  • 商品编号:
    TTS-120A-1S
  • Brand:
    TrackStar
  • 重量(g)
    180.00
  • 长度
    0.00
  • 宽:
    0.00
  • 高度:
    0.00
Community
Discussions
Rate&
Review

撰写您自己的评测

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
I hope they keep licensing these from Toro/skyrc as they are solid units for blink needs. Granted it looks like the Gen II is taking this over. Easy to program and very easy to use.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Just received two of these ESCs in the mail today. Absolutely thrilled with the build quality HK! After calibrating per instructions, tweaking with the programming card, installed pinion gear and took a few laps around the living room. Combined with the 8.5T Turnigy TrackStar...pulling wheelies with my Associated SC10. Racing tomorrow so durability test to come. Cant go wrong with this ESC.

verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I am running this in a Team Associated RC10L3 Pan Car
5.5T 6000KV HL540-3650 3G2P Sensored
ZIPPY Flightmax 4000mAh 2S1P 25C Car Lipoly (ROAR APPROVED) (USA Warehouse)
Robinson Racing Associated RC-10L SS Super Machined Spur 64p 78t
Robinson Racing Associated RC-10L SS Alum. Pro Pinion 64p 50t

I am getting speeds in excess of 50mph on the asphalt (I'm sure I can get allot faster)
Using the default settings the Motor and esc stay very cool and I am getting 20-25 minute run times (not on a track, just up and down my street)
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
ESC supports sensor and sensorless motors, but this ESC brings significant "cogging" if it is used with sensorless motors. The cogging effect is much higher as it is typical for sensorless motors and some trimming cheats are necessary!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
so far works great,the only thing i woud sugest it that the wires all be 12gauge for running pan car or 1/12. easy programing with card!! will need to get another for my stock.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I fitted this to my 1/10 turnigy sct with a trickster 4.5 turn motor and a 24 tooth drive gear and it flies! Total out of control power and more top end than the little car can handle. U should see the tires grow as u put the power down. Mental! I also waterproofed mine in plastidip to keep it safe. Love it!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Top Flight ESC for 1/4 the money!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
great esc for the money run it in my mardave and then use same esc in my 1/10 buggy get 2 esc for the price of one
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
works great in my mardave on 1s lipo no prob
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
The ESC works great with every motor down to 3,5 Turns. Other ESC couldnt handle this motor. Bad thing is that the ESC plug doesnt deliver the 6V DC!! Solution is to plug the programming cable into the aux port of the receiver.
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

产品标签

使用空格分隔标签。使用单引号(')标注词组。