KV：1800RPM / V
Unit Weight (g):
works great and runs very quietBought this motor for the HK500TT Heli and had everything set up perfectly. Hovered for 10 mins in my backyard for the maiden flight. Went to the flying field and hovered for 20 seconds and the bearings blew out in the motor. Very poor quality or just a fluke. Now I either have to Eat the money it cost me to buy and have it shipped, or go through the horrible process of warrant exchange.Excellent Motor, Lots of power. Easy to install.More than enough power, set my throttle to 60pcnt with a 13 th pinion, for soft sport flying. MUST check play and the grubscrew because mine was lose, a small problem. Set timing to low for power saving.
goood motor, fits hk 500 tt excellent, plenty of powerThese have wayyyy too much power for 6s. I've blown up 4 hk500 tail hubs with this motor on 6s governed at 2600 rpm. It's more powerful than it is efficient. This is a bit of a noisy motor on 6s, I would recommend this motor 5s ungoverned.When it is time to replace your TREX 500 motor this is it! Very powerful compared to stock motor. I flew it this morning and had to turn down all my throttle settings due to the increased power. I am running this with an 80A YEP ESC and works perfect. Buy it, you won't regret it.I am using this motor in both of my Trex 500 helicopters. I LOVE IT. I've had NO PROBLEM with them. Configuration:
Main Gear: 162 Teeth
Pinon Gear: 12 Teeth
Motor Poles: 6
ESC: Castle Edge 80 HV
Battery: Zippy 3000 20c
Flying Style: Heavy Sport flying
This is a good motor for Trex 500. With 6 cell and 13 pinion the head speed is more than enougth. The power is terrible.
Bardzo dobry silnik, idealnie sprawdza si w Trex 500, polecam.Very powerful motor and very reliable. Highly recommended to use with 12T pinion on T-rex 500 and 6S battery.