注册

Product Finder

设置

Useful links

 
[["US","AU","GB","DE"]]
注册
Shipped From:
  • Global

Turnigy™TGY-6114MD数字帆绞盘伺服(鼓型)

Turnigy™TGY-6114MD数字帆绞盘伺服(鼓型)

Now save 保存 AU$ 0.00 AU$ 0.00

AU$ 69.34
缺货!
Rating:
Stock:
OUT OF STOCK
重量:
105
SKU:
9295000014-0

Price War

产品介绍

一个强大的高规格数字帆绞盘伺服与可以被编程为从1到6圈(由终点调整控制)的操作金属齿轮。所以它是完美的大游艇启航这绞盘伺服可运行在高达扭矩的令人印象深刻的14.5公斤。

眼镜:
打开:1-6可编程
电压范围:4.8〜6.0V
速度:0.72〜0.60sec 360°
扭矩:12.32〜14.5公斤
空闲电流:0.12〜0.14A(空载)
工作电流:0.40〜0.50A
堵转电流:1.80〜2.20A
齿轮: 金属
尺寸:40.3点¯x20.3点¯x38.7毫米
转鼓直径:35.5毫米
重量:61克
连接器:JR风格,线长265毫米

Product
Specifications

额外信息

  • 商品编号:
    9295000014-0
  • Brand:
    Turnigy
  • 重量(g)
    105.00
  • 长度
    95.00
  • 宽:
    35.00
  • 高度:
    75.00
  • 速度(秒/ 60deg )
    0.60
  • 扭矩(公斤)(最少0.01公斤)
    14.50
  • Unit Weight (g):
    61
  • A(毫米):
    44.00
  • B(毫米)
    40.00
  • C(毫米)
    42.00
  • D(毫米):
    20.00
  • E(毫米):
    58.00
  • F(毫米)
    27.00
Community
Discussions
Rate&
Review

撰写您自己的评测

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Very good value good replacement for drum sail winches.
Note must use computer aided radio to set end points and
turn radio on before boat and turn boat off before radio.
used on Marblehead rc sailboat with A-Rig on in 12 to 15 knots
of wind winch had no problems sheeting in the rig even though
the boat was over powered conditions were B-rig borderline C-Rig.
mike
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Hi, I bought 2 of these (1 for a spare) and found that unless you can programme them, they can cause a lot of model damage. For example: The winch works fine if the servo pulse is KEPT between the accepted standard of 1 to 2 mS. With both of mine, if a pulse gets down to around ).8 mS, the servo will CONTINUE to rotate until something breaks. An example where this might happen is with the Turnigy 6XS Tx, whose throttle (winch) output goes to 0.75 mS if the radio is switched on without the throttle stick at "idle"...Crunch! Also, with the end travels set at 100pcnt, all chanels go outside of the magic 1 to 2 mS "standard".

Please, HobbyKing, bring on the programmer/instructions. This is not a cheap servo and can do a lot of damage, if travel cannot be limited.
verified_user Quality
trending_up Value
playlist_add_check Overall
Upload
Videos
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

产品标签

使用空格分隔标签。使用单引号(')标注词组。