注册

Product Finder

设置

Useful links

Live Chat
 
[["US","AU","GB","DE"]]
注册
Shipped From:
  • USA
  • Global

Turnigy™TGY-D56MG无芯DS / MG HV伺服1.2千克/ 0.10sec /5.6克

Turnigy™TGY-D56MG无芯DS / MG HV伺服1.2千克/ 0.10sec /5.6克

QTY:

Now save 保存 AU$ 0.00 AU$ 0.00

AU$ 9.32
Rating:
Stock:
重量:
17
SKU:
9399000023-0

Price War

servo
acc
产品介绍

该Turnigy D56MG HV是伟大的,在需要的金属齿轮的耐用性小的3D飞机和parkflyers。该空心杯电机以低廉的价格提供了出色的支撑力和精确度。高压电压可以直接使用2S锂聚合物或寿命电池,无需一个BEC。

眼镜:
重量:5.6g
尺寸:19.8x8.2x21.2mm
失速扭矩:0.85公斤/厘米(4.8V) - 1.2公斤/厘米(7.4V)
工作速度:0.14sec / 60度(4.8V) - 0.1秒/ 60度(7.4V)
工作电压:4.8-7.4V
伺服插拔:JR(JR适合双叶和)

Product
Specifications

额外信息

  • 商品编号:
    9399000023-0
  • Brand:
    Turnigy
  • 重量(g)
    17.00
  • 长度
    90.00
  • 宽:
    20.00
  • 高度:
    50.00
  • 速度(秒/ 60deg )
    0.10
  • 扭矩(公斤)(最少0.01公斤)
    1.20
  • Unit Weight (g):
    5.6
  • A(毫米):
    27.00
  • B(毫米)
    20.00
  • C(毫米)
    24.00
  • D(毫米):
    8.20
  • E(毫米):
    28.00
  • F(毫米)
    16.00
Community
Discussions
Rate&
Review

撰写您自己的评测

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
very small servo and light wegiht. also it can handle "high voltage" you can use this widely.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
This servo is poor quality, and not worth it's price.

I've tested the servo with the HobbyKing LED servo tester and when the servo reaches the extreme signal of 230 it stays locked (jammed) in the extreme position. The good quality servo should not lock up when extreme signal is received.

I initially intended to use these servos for my fixed wing, but knowing the nature of the failure I would not recommend anyone to use these on the air frames of any kind.

verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I have installed quite a few of these in some mini FPV wings that I built for me and some friends of mine. All have worked out super well. Running them at 5V off the BEC of a 12A ESC.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
1A Servos.
Benutze die Servos an einen 2S-Lipo. Habe aber zur Sicherheit immer eine Diode 1N4001 in Reihe vor jedes Servo geltet.
Die Servos haben eine ausgezeichnete Rckstellgenauigkeit, kein Spiel und fr ihre Gre
enorm viel Kraft.
Absolut zu empfehlen.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
These Turnigy DSGMG servos appear to be well made. I bought four of them for their "HV" capability to use in a HobbyKing DLG. Apart from the motor pinion and its mating gear which were nylon, the remaining gear-train is all aluminium.

I used a two cell 300mAh Turnigy LiPo to power the two servo set-up in my DLG. Both servos failed within five minutes of powering-up. They ceased to work accompanied by a burning smell. A very disappointing result, hence the poor score.
Mark S.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
je les ai achet? pour mon Extra 300L 3D et j'ai peu qu'il soit un peu faiblard et en, plus je les trouve lents
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Received these servo's yesterday, tested them right away because I was not completely confident that they would function on 2S (there are some messages about them burning on 2S - 8,4V and the technical data on the Hobbyking site and the packaging of the servo state an operating voltage up to 7,4V). First test on 5V with a BEC, than on 6V with BEC, after that on 7,4V on a half charged 2S battery without BEC and final test with fully charged 2S battery. The servo's held up great but are a bit slow on 5V. On 8,4 Volt they rock, very strong, fast and accurate! Going to build them in my Binary V2 DLG. Total weight of the electronics (diversity 6CH LemonRX, 260mAh battery and the three servo's) below 40 grams. Looks promising.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Very Great Servo! Using these on my FT Might Mini Arrow.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
this is an awesome servo. very strong and accurate for its size. which makes it perfect for small park flyer models (I put them in my bonsai) or where size is a problem such as bomb bay doors or flaps where the servo is in the wing. would definitely recommend these and I will be buying more for future models or t have around as spares.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Wer 2s fhige DLG Servos sucht wird hier bitter enttuscht!

Hab mir 6 von diesen Servos bestellt und habe 2 davon an 2S Lipo getestet. Ergebnis: Beide reif fr die Tonne... Die brigen 4 habe ich ber ein 2A Bec zu 6 Volt getestet und die gehen noch, allerdings ist mir die Spannung beim Anschlu des 4en Servos die Spannung eingebrochen was ja irgendwie nicht sein kann(oder ziehen die Dinger bei 0 Last mehr als 2A!!). Wie dem auch sei, mein Fazit ist: Nicht verwenden, definitiv nicht 2S fest. Finger weg
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

servo
acc

产品标签

使用空格分隔标签。使用单引号(')标注词组。