New Items 论坛
注册

Total Price

AU$ 0.00

购物车 0 购物车 0 Loading...

UBLOX LEA-6H GPS模块W /内置天线2.5米精度

UBLOX LEA-6H GPS模块W /内置天线2.5米精度

Discontinued Product

Please continue searching for a similar product.
重量:
28
SKU:
9387000012
WANT FREE SHIPPING? Click here to find out more!

这款GPS模块集成了25x25x4mm陶瓷贴片天线,UART串行接口和USB的LEA-6H GPS接收机。在U-blox的LEA-6H定位引擎的高性能使得即使在弱信号环境中导航。

推荐用于特定multicopters,其中GPS精确度是非常重要的。它有陶瓷贴片天线和热启动备用电池的有源电路。这些单位将推出预配置为ArduPilot米加使用,在配置文件中提供了谷歌库。

该模块支持电源和数据传输的USB V2.0兼容的串行端口。

特征:
•船上的Micro USB
•UBLOX LEA-6H模块
•5HZ更新率
•高精度2.5米精度
•25x25x4mm陶瓷贴片天线
•增强型省电模式:基于智能电源管理降低功耗
•SuperSense®室内GPS:-160 dBm的跟踪灵敏度
•LNA和SAW滤波器
•3V锂电池备份
•低噪音3.3V稳压器
•电源和修复LED指示灯
•ArduPilot米加兼容的6针连接器JST
•暴露的RX,TX,5V和GND焊盘

注:此模块附带的一个38400率布阿岛,5HZ

眼镜:
电源:3.5〜6.0V
备用电源: 车载锂电池,5毫安
天线:25x25mm贴片天线
工作温度:-20°C〜60°C
外形尺寸:37x37x9mm
连接器:SMT-垫10针接头,间距:2.54毫米
串口:1 UART @ 3 V水平1个USB

  • SKU 9387000012
  • Brand -
  • 容量(mAh) -
  • 重量(g) 28.00
  • 长度 80.00
  • 20.00
  • 高度 60.00

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

I bought this to replace the ublox neo 6m currently using with my APM2.5 since i read every where this is perfect match for the APM2.5.
This module come with usb socket so we don't need FTDI cable to write this 3DR-Ublox.txt. setting to the module.
After testing i found out that this module have faster gps lock, (cold start, first time power on) about 3 minutes compare to the neo 6m about 6-7minutes.
Other then having faster cold start and usb ready, i don't feel any improvement to the accuracy or performance comparing to the neo 6m.
4 star for the value since it cost 2 times then the neo 6m but have more or less the same accuracy.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I bought this to replace the ublox neo 6m currently using with my APM2.5 since i read every where this is perfect match for the APM2.5.
This module come with usb socket so we don't need FTDI cable to write this 3DR-Ublox.txt. setting to the module.
After testing i found out that this module have faster gps lock, (cold start, first time power on) about 3 minutes compare to the neo 6m about 6-7minutes.
Other then having faster cold start and usb ready, i don't feel any improvement to the accuracy or performance comparing to the neo 6m.
4 star for the value since it cost 2 times then the neo 6m but have more or less the same accuracy.

Good GPS module. Nice to see HK stocking more parts for the ArduPilot 2.5 clone. Speed and ultrasound sensors next please.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Good GPS module. Nice to see HK stocking more parts for the ArduPilot 2.5 clone. Speed and ultrasound sensors next please.

This thing locks in almost right away. I'm very happy with the speed of finding sats, even in side my house I've got about a 10 m accuracy! Very Happy!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This thing locks in almost right away. I'm very happy with the speed of finding sats, even in side my house I've got about a 10 m accuracy! Very Happy!

Again another poorly matched peace of gea from hk. a hextronick gps that does not plug into a hextronick flight board recommended by hobby-king to match.
1. does not plug in as connectors are different sizes
2. cant solder it as power pins don't go anywhere on the board.
why supply grnd and 5v pads on a board if they not in the actual circuit. And again no manual on how to work around this stupidity can be found anywhere - that the T hack does not work for peoples info.. Plus this was the board I purchased but mine look different!

only way is to power vir usp at 3v - how stupid.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Again another poorly matched peace of gea from hk. a hextronick gps that does not plug into a hextronick flight board recommended by hobby-king to match.
1. does not plug in as connectors are different sizes
2. cant solder it as power pins don't go anywhere on the board.
why supply grnd and 5v pads on a board if they not in the actual circuit. And again no manual on how to work around this stupidity can be found anywhere - that the T hack does not work for peoples info.. Plus this was the board I purchased but mine look different!

only way is to power vir usp at 3v - how stupid.

Im very unimpressed about the GPS. First I connect the GPS to the USB port, an it seems to work fine. Next I try to connect to the CRIUS board, but it seems the GPS get no power. I tryed different ways, also to power the GPS from the 5V Pins from the ESC pins but the GPS get no power. After this I measured the 5V input to the ground on the upside of the board, and it looks like, there is no connection from the 5V to the board.
So now I will try to get 5V over the USB port and the signal over the SMD and hope this will work. But that could not be the right way it should work :-(

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Im very unimpressed about the GPS. First I connect the GPS to the USB port, an it seems to work fine. Next I try to connect to the CRIUS board, but it seems the GPS get no power. I tryed different ways, also to power the GPS from the 5V Pins from the ESC pins but the GPS get no power. After this I measured the 5V input to the ground on the upside of the board, and it looks like, there is no connection from the 5V to the board.
So now I will try to get 5V over the USB port and the signal over the SMD and hope this will work. But that could not be the right way it should work :-(

I just received my module. The antenna is fixed wrong position. ( see files) I check functionality with u-center software. I got 8 satellities in 2-3 second each time. but accuracy is not as good as 2.5 m as now. I see more than 5 mm in deviation map at u-center software.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I just received my module. The antenna is fixed wrong position. ( see files) I check functionality with u-center software. I got 8 satellities in 2-3 second each time. but accuracy is not as good as 2.5 m as now. I see more than 5 mm in deviation map at u-center software.

5-6v-powerhack-back Download [2002]
5-6v-powerhack-top Download [1999]
No File Name Download [125]
U-Blox6H corrected pinout Download [93]

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!