New Items 论坛
注册

Total Price

AU$ 0.00

购物车 0 购物车 0 Loading...

活力VSD-11YMB MG / HV超大360度/绞车伺服0.75sec /28公斤/150克

活力VSD-11YMB MG / HV超大360度/绞车伺服0.75sec /28公斤/150克

Discontinued Product

Please continue searching for a similar product.
重量:
200
SKU:
VSD-11YMB
WANT FREE SHIPPING? Click here to find out more!

活力VSD-11YMB HV超大360度/绞车伺服0.75sec /40公斤/150克

工作电压:6.0V〜7.2V
STD方向: 逆时针/脉冲旅游1500 1900uSec
失速扭矩:19 kgf.cm在6.0V,7.2V时28 kgf.cm
运行速度:0.92秒/ 60在6.0V时为0.75秒/ 60空载时在7.2V空载
重量:150g
运行电流:0.35A〜0.40A
电机:3极重型
输出角度:2160度(6圈)
轴承:2BB
装备: 合金装备
尺寸:60.0点¯x29.1点¯x54.3毫米
导语:250毫米22AWG,万能插头
特殊功能: 防水

  • SKU VSD-11YMB
  • Brand -
  • 重量(g) 200.00
  • 长度 75.00
  • 40.00
  • 高度 54.00
  • 扭矩(公斤)(最少0.01公斤) 40.00
  • 速度(秒/ 60deg ) 0.75
  • A(毫米) 58.00
  • B(毫米) 60.00
  • C(毫米) 54.00
  • D(毫米) 29.00
  • E(毫米) 74.00
  • F(毫米) 41.00

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

In the VSD-11YMB you will find 2 main components. 2 x mosfet AO4606 and the servo controller MAC900. The mosfet can take 30V. I was able to get the datasheet of the MAC900. In the datasheet it is writting "Supply voltage range: 3.3 to 9 V (1~2 Lithium Batteries)" So YES this servo will work on 2S lipo! I have then tested the servo on 2S lipo and it works! The servo is water proof, there is 2 main o-rings on the casing and 4 mini o-rings around the screws. In my case, I took the electronics of the VSD-11YMB with the potentiometer and put it inside a Hitec HS-311 (cut the main gear) and got myself a small winch servo!!! I was VERY happy!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

In the VSD-11YMB you will find 2 main components. 2 x mosfet AO4606 and the servo controller MAC900. The mosfet can take 30V. I was able to get the datasheet of the MAC900. In the datasheet it is writting "Supply voltage range: 3.3 to 9 V (1~2 Lithium Batteries)" So YES this servo will work on 2S lipo! I have then tested the servo on 2S lipo and it works! The servo is water proof, there is 2 main o-rings on the casing and 4 mini o-rings around the screws. In my case, I took the electronics of the VSD-11YMB with the potentiometer and put it inside a Hitec HS-311 (cut the main gear) and got myself a small winch servo!!! I was VERY happy!

pdf vsd-11nymb Download [574]

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!