注册

Product Finder

设置

Useful links

Live Chat
 
[["US","AU","GB","DE"]]
注册

ViperJet复合90毫米EDF喷气1370毫米(ARF)

ViperJet复合90毫米EDF喷气1370毫米(ARF)

Discontinued Product

Please continue searching for a similar product.
Rating:
Stock:
OUT OF STOCK
重量:
5572
SKU:
411000004-0

esc
battery
servo
motor
acc
产品介绍

你觉得对速度的需要?该Hobbyking Viperjet是一个真正的,完全的特技飞行速度机器以惊人的美貌来匹配它的性能。 70毫米版本已经一个巨大的打击,这是正确的,这个惊人的90毫米版本肯定会是一样受欢迎。裸机身轻巧,所以从6S任何东西是要给你一个惊人的便宜90毫米运动飞机,肯定没有在这个类看起来这个好飞的这么好那么一点钱。

该Viperjet的华丽彩绘复合材料机身和配套预施加覆盖使一个漂亮的模型,结合它的长相和速度与Viperjets惊人的精确度特技飞行能力,你有最精彩的EDF飞机在它的类的一个你能承受的价格。这华丽的寻找模式也表现良好的预装裂瓣低速礼貌,当然还有“小翼”,它提供升力,一直到最慢的速度,这意味着大大降低失速速度和出色的飞行方式。

一个完整的硬洁具套件和固定起落架都包括在内,缩回可以安装,当然有一点的工作。大篷面积为您提供了多种选择的Lipoly电池,从6秒一直到10秒的实际速度怪胎!

产品规格:
翼展:1370毫米
长度:1250毫米
机翼面积:31.5dm²
翼载荷:115克/立方分米
裸机身重量:2170克
飞行重量:3600克〜4100克
EDF单位为90mm
颜色: 绿色/白色/蓝色DK
电台:5〜6通道

特征:
全彩涂和覆盖
可拆卸风扇罩
层坐骑预装的缩回
包括所有硬件

要求:
你自己的6通道RX / TX
36毫米EDF内转子或外转子电机(1200W敏)
90毫米高性能风扇单元
80A〜150A OPTO ESC
8〜9金属齿轮,高扭矩微型/小型伺服的
6S〜10S 4500mAh的(最低)
UBEC

Product
Specifications

额外信息

  • 商品编号:
    411000004-0
  • Brand:
    N/A
  • 容量(mAh)
  • 重量(g)
    5572.00
  • 长度:
    1260.00
  • 宽:
    270.00
  • 高度
    470.00
Community
Discussions
Rate&
Review

撰写您自己的评测

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Pro: Plane looks awesome. Plane flies well. Split flaps work well. Access hatches are well designed for both EDF and battery. Plane is fully ducted from factory.
Con: Major-When they assemble this plane at the factory both of the planes I purchased have the vertical stabilizer lean to the left about 1/4".=Factory defect that cant be fixed, this is the reason for 3 stars on quality. Other Minor-Both planes also had the elevator covers rotated 90 degress so the decal on the cover had to be removed. Minor- The position of the internal wall for the front landing gear severely limits the gear height.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Plane came packed nicely; however, several minor paint chips on the fuselage nose area. It also appears the finish has been scuffed in places as the sheen has dulled. Very poor overall finish. Additionally, the two piece exhaust ducting is a welcomed innovation but there appears to be no room to extend the servo leads from the rudder and elevators forward thru the fuselage. Can anyone provide a "work around" for this problem? Would also like specific retract recommendations for the model.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
had a few scratches out the box nothing major. flies great . im running 10s jetfan. very nice starter jet after flying a few foamies. i love it !!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Got the Plane
there was a scratch in the side through the paint stripe
also was a soft spot on the same side this is why the lower rating
no real problem added a little epoxy to stiffen but for the price and cost of shipping
The consumer should not have to do even a miner repair seemed to be well packed so has to be a factory quality control problem
other than that plane looks great seems to be balanced going to use Doctor,.
Mad 6S 90 EDF also bought retracts to add to the plane should be nice when done
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Flying this jet on jetfan 90mm with het 1680kv on 8s , pulling 119.5 amps and 3650 watts , I epoxied all the formers and retract area. Keep it lite , mines 8 lbs 11 ozs. Cg 98-100mm from le. Just got the 120mm edf version 2100mm wing span. Eflite 15-25 retracts with tams trunnions and struts, drop in fit !
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Way better than the first batch .
Flies great at 100mm cg and good power from jetfan 90 and het 1680 on 8s. Retracts are possible , look at tamjets and eflite 15-25 size. I did reinforce all the formers that I could get to with more epoxy and strengthened the retract mounts . Duct work for the fan is top notch and paint is good. Dont let others bad luck with this jet discourage you from making a good purchase and flying a fun plane.

Will tip stall if speed is to slow coming in on approach.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
received my viper jet with a 3 mm crack about 5 inches long straight up the leading edge of the vertical stab.looks just like it was not joined correct. when the 2 fuselage half's were joined together as one fuselage. Little disappointed since I have been waiting for a year for this jet to be in stock. Will try and repair It with stuff it Fiberglass and try and match the green paint .
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Just received mine, looks Great! Will start the build next week.
Anyone using the Madthrust 10s fan/motor?
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Here is another video, great flyer, wemo evo fan HK edf 1900kv cc120
eflite retract tam struts 6s 4500 hk lipo
http://www.youtube.com/watch?v=uWLbs35KswU
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
https://www.youtube.com/watch?v=yrmIHHFGFOE&feature=c4-overview&list=UUUWR5wYlzVaNZQgC-WCCoSw
video on youtube
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload
Files

esc
battery
servo
motor
acc

产品标签

使用空格分隔标签。使用单引号(')标注词组。