注册

Product Finder

设置

Useful links

 
[["US","AU","GB","DE"]]
注册
Shipped From:
  • Global
  • USA

妖兽永XL坡战斗飞翼EPP1525毫米(KIT)

妖兽永XL坡战斗飞翼EPP1525毫米(KIT)

QTY:

Now save 保存 AU$ 18.84 AU$ 18.84

Special Price AU$ 75.29 AU$ 75.29

You save 保存 AU$ 18.84 AU$ 18.84

Was  AU$ 94.13

Rating:
Stock:
重量:
2661
SKU:
9433000005

Price War

产品介绍

邪恶永飞XL像它的轨道上!但反应可控,易于上手。添加一些镇流器较重(多风)日在当地的坡度和享受
无忧无虑的高速乐趣只有近indestuctable作战联队可以提供!

是的,它是WICKED - 这是邪恶的乐趣!

邪恶永XL能够被风的短短10knots斜坡周围飘荡或砟了“铅雪橇”式的高速乐趣在20节加分!

建造完全是出于几乎牢不可破高密度的EPP材料,这种模式将永远持续下去 - 从字面上!该套件包括碳备件,使这个机翼弯曲自由 - 也包括在套件是所有的硬件​​,增强带和丰富多彩的覆盖带,所有你需要补充的是一瓶CA胶粘剂加入翼半部分,保留碳梁在他们的预切槽。

所需要的无线电系统需要有增量的混合的升降副翼控制面混合。添加您的接收器和一个5号电池接收器包,用自己的舵机选择沿 - 标准和微型舵机的满足与预切伺服井,我们建议金属齿轮舵机无论您选择的大小...... 。这是一个作战联队毕竟!

眼镜:
翼展:1525毫米
长度:395毫米
飞行重量:900-1200g

包括:
EPP翼内核
碳桅杆×5
巴尔沙升降副翼
玻璃纤维加固带
彩色胶带整理
全硬件套件
说明书

要求:
4通道收音机升降副翼(DELTA)混合
2标准或微型舵机(建议金属齿轮)
4或5节镍氢电池的接收器

 

Product
Specifications

额外信息

  • 商品编号:
    9433000005
  • Brand:
  • 重量(g)
    2661.00
  • 长度
    950.00
  • 宽:
    90.00
  • 高度:
    400.00
Community
Discussions
Rate&
Review

撰写您自己的评测

Only registered users can write reviews. Please, sign in or sign up

Quality
Value
Overall
very nice wing i have 2 of them no probloms with putting in 6v reviver battery in you have to make your own lid or just use bullet tape over the battery otherwise very simple buid works well if i had my way i would get few more
Quality
Value
Overall
Quality
Value
Overall
Instructions appear to be for the smaller version and aren't much use. Very easy to assemble. The grooves for the carbon are already cut and are a good fit. Plenty of fibre glass tape used with lots left. I got yellow and orange coloured tape and again plenty left. The supplied velcro for the wing ends looked too small and the wrong shape. I'm guessing it was for the smaller version of the wing. One aileron was slightly bowed and needed trimming to get it to fit against the wing. Despite the little errors I'm very pleased with how it came out and am looking forward to flying it. I tried off our local hill by myself in 25mph wings and couldn't launch it!!
Quality
Value
Overall
Quality
Value
Overall
This is not a cheap version of anything. This wing is the 60 Scout Bee by Windrider, being sold by HobbyKing at a better price than Windrider sells it. I used the Hex MG-14 servos which fit and work perfectly. I skipped the strapping tape and used laminating material ("The New Stuff") then used EconoKote sparingly. I've flown this wing at Bluff Park in Long Beach, Dave's at Carlsbad, and Temple Hill in Pomona and it is a total blast to fly. A hawk bit a good size hole in it while at Temple Hill and it didn't miss a beat. I consider this one of my best purchases from HK. I highly recommend this slope wing.
Quality
Value
Overall
Quality
Value
Overall
Great size wing, flown it from the local slope a few times now. Building was quick and simple, all the grooves for the carbon reinforcements were a perfect push fit. Came with a full roll of 3 inch fibre tape (uni-directional) and so was able to cover the entire wing with it. This not only increases the strength but also makes it easier for the decoration tape (also included) to adhere and not bubble up. Weight of equipment not an issue on this model - it has more than enough surface area. In fact, I suspect it could do with more weight to aid penetration in to wind. I have not tried ballasting it up yet, it has so far managed the various wind strengths just fine. Great wing to fly, enjoying it. Be aware though that this is a BIG wing (relatively) when assembled. Still, bigger flies better!
Quality
Value
Overall
Quality
Value
Overall
it is my first sloap soarer,not previous expierience on riding the wind,but i must say this wing is incredible!!!! so steady in wind,i flew it with 12 kt wind and is like flyiing on rails as some one else wrote about it in this page.
easy to assemble, straight forward but previous expierience required for some points during assembly. no where instrucrtions for those noise generators included,so look on the net for positions on top in order to make noise!!!!
i recommend it and i will definetely buy it again if needed.
Quality
Value
Overall
Quality
Value
Overall
This is a great wing! Its well made, easy to build, strong and flies great as a slope soarer. Unfortunately a magpie took a serious disliking to mine when flying at Marks Park, Bondi. Trying to get away from it, I got behind the ridge and off the wing went - searched for an hour but it had vanished! If anyone finds it please comment. Anyway I just had to buy another - such great fun!
Quality
Value
Overall
Quality
Value
Overall
Gluing the Wing together was easy enough. as did applying the re-enforced tape. Hint: before applying tape use 3M 77 spray adhesive . . . it helps to hold down the tape. What took me the most time (and I did take my time building the Wing) was fitting the servos, connecting rods and elevon connector. Need to take your time lining everything up.

Applying the re-enforced tape and the packing tape was took some skill. Hint: before applying tape use 3M 77 spray adhesive . . . it helps to hold down the tape.

The CG is close to what is recommended. I used a 4-cell nickel hydride battery and still had to as 6 ounces of lead to balance the Wing with just a touch of nose down. I found the stick on weights for auto tires worked great, especially the 1/4 and 1/2 oz. lead.

I have flown the Wicked Wing XL for the past few weeks and it is very impressive. A number of guys at our club were very impressed with my build and its excellent flight characteristics . . . most of them own wings of one nature or another and are excellent combat pilots.

This is a exceptional glider . . . it is absolutely amazing!

Jim D.
Quality
Value
Overall
Quality
Value
Overall
Very easy to assemble it, very pleasant flight, it can handle huge weight if you put a larger motor... It came with additional items not mentioned in site that looks like whistles or sirens but no instructions about how put in the wing...
Quality
Value
Overall
Quality
Value
Overall
Came in good conditition, long carbon spars and tape included. Also almost all necessary hardware. Foam is a bit brittle (seems as it was moulded with too low pressure) but will do the job once it is taped. Nice Wing overall.
Powered maiden will be in the next weeks. Seems to be "similar" to the Scout Bee ;) ... Nice: The option to fill up all the premoulded holes with the optional foam parts included. With these glued in you can place the servos, battery,and RX where ever you like (recommendend at least for the servos if you like motorize this wing).
Kind regards
"Famelazar"
Quality
Value
Overall
Upload
Videos
  • Wicked Wing Slope Soarer

Upload
Files

产品标签

使用空格分隔标签。使用单引号(')标注词组。