注册

Product Finder

设置

Useful links

 
[["US","AU","GB","DE"]]
注册
Shipped From:
  • USA

X-1迷你飞翼EPO600毫米(ARF)

X-1迷你飞翼EPO600毫米(ARF)

QTY:

Now save 保存 AU$ 0.00 AU$ 0.00

AU$ 39.56
Rating:
Stock:
重量:
1155
SKU:
304000012-0

Price War

产品介绍

一种快速,有趣的飞翼是快速建设,快速和廉价的?在X-1飞翼到达作为一个完全成型机身EPO套件,这意味着你可以选择任何运动,你要电池和电子包!

大厦过得很快的机身为1个。刚上塑料cloroplast鳍螺丝,滴在你的伺服系统和飞!它可以是准备在少至2小时去。作为完全成型EPO泡沫,该模型是重量轻,坚固耐用超。小尺寸使得X-1在汽车保持或采取在一个背包远足的理想典范!

特征:
•几乎箭在弦上 - 与您所选择的电子和电池的建立模型
•模压机身EPO
•螺丝上cloroplast塑料片
•大电池/电子湾 - 伟大的微FPV设置
•低元件数,快速打造
•快速和乐趣!

眼镜:
翼展:600毫米
长度:400mm
飞行重量:270克

需要:
3通道发射器和接收器,升降副翼混
3S 11.1V 1300mAh的电池Lipoly
2×9克舵机
12A ESC
1806 2100kv无刷电机
5X3螺旋桨

Product
Specifications

额外信息

  • 商品编号:
    304000012-0
  • Brand:
  • 重量(g)
    1155.00
  • 长度
    645.00
  • 宽:
    100.00
  • 高度:
    400.00
Community
Discussions
Rate&
Review

撰写您自己的评测

Only registered users can write reviews. Please, sign in or sign up

Quality
Value
Overall
Two words - JUST FUN! it took me all of 15 minutes to get this from box to flying with FPV. It takes you back to fun flying. The video about the product is spot on, I ran it straight into the ground and it didnt damage anything. Great fun for the price and was able to use a spare multi rotor motor i had laying around.
Quality
Value
Overall
Quality
Value
Overall
Very small, might fly quite slow with the right setup, I have a funfighter motor and ESC combo and it is crazy fast and twitchy even with a 1600 3S strapped in. Good fun and quite tough.
Quality
Value
Overall
Quality
Value
Overall
Super flugeigenschaften sowohl langsam oder auch schnell, ist auch genug platz um alles unterzubringen . Habe ein 3s 1000er akku wrde auch noch locker 1300 passen.
Quality
Value
Overall
Quality
Value
Overall
Can't beat this little bullet for the price! This is the first RC plane I have flown in 15 years and it was no problem. I have been messing with quads for FPV for the last 2 years but wanted to try out a tiny plane for FPV and watched this video: https://www.youtube.com/watch?v=UoqZs8OxKrY I was sold. I put it together with spare quad parts I had. The plane is durable and really does take a crash well. First flight I nosed right into the dirt due to a poor CG. That is my only complaint: poor explanation of the CG which is critical. Otherwise it's a great buy.
Quality
Value
Overall
Quality
Value
Overall
The only down side to it is the complete lack of instructions. There are three important things to know: First, the CG should be set at around 7 mm ahead of the slot that carries the servo wires through the wing. Second, in order to mount the motor you will have to unglue the wooden motor mount, drill it for your motor, bolt the motor to it and then re-glue the mount. Use hot glue so you can unglue the mount again easily if you need to change motors later on. Third, set your elevons flush with the wing root trailing edge for the first flight. This wing already has the needed "up elevator" amount molded into the shape of the airfoil. I have crashed this wing several times trying to find the best cg position and I can say it is extremely strong. I highly recommend this product if you are looking for a very nice-flying, small wing. Would also make an excelent light-weight fpv model.
Quality
Value
Overall
Quality
Value
Overall
Excelent little wing. Flies fantastically. I set mine up for line-of-sight flying (no fpv). Used 5-gram servos (hxt 500), a zmr 1804 2400 kv motor, 5x4 gemfan prop, 12 amp AFRO ESC, orange R410x receiver and an 850mah 30C 3S lipo pack. Ready-to-fly weight came in at 230 grams (much lighter than the design flying weight of 270 grams). It will do unlimited verticals in this set-up with this weight (at 1000 meters above sea level, 28 degrees C). I subsequently lit the wing up with internal leds (it's an awesome night-flyer in this configuration). Flying weight now is 240 grams and it will almost do unlimited verticals at that weight, but not quite. I will post a picture of the lit-up wing under the "files" tab above. Endurance is 16 minutes with the leds off and 14 minutes with leds on.
Quality
Value
Overall
Quality
Value
Overall
I forgot to mention that, if you need the extra room or you need to move stuff forward to get the right cg, you can cut off the epo bulkhead in the middle of the fuselage without any ill effects. I did this on mine. If you want to preserve the original stiffness during negative-g maneuvers, simply hot-glue a small piece of balsa wood to the top part of the fuselage (underneath the top hatch, so it's internal to the wing when the hatch is on). I did this too but then one day I noticed that the piece of balsa wood had come unglued on one side, with no noticeable effects on the flight characteristics, even when performing sequential inverted (outside) loops.
Quality
Value
Overall
Quality
Value
Overall
I bought this to try to get some speed.
I have 20A 2825kv 4s setup with 6x4 prop three blade...
It flyes insane fast, going to test a 5x5 high speed prop..
it flyes faster than my Synapse edf...
It is not stable in high speed fligh, but ok is slower speed...
Good quality...
Quality
Value
Overall
Quality
Value
Overall
i am planing to meiden this wing with ax 1806 on her!

actually i want a not so fast micro fpv wing and after maiden i will downgrade the motor for some test.

nice finishing and i guess i can unscrew the fins and pack the wing in her box for transport!

the canopy require a extra small (micro) pair of magnets somwhere in the midle , otherwuse im afraid i will lose it on the flight

htx900

AX1806/2100kv

AR400

3s1000-1300mah

1300 seems to be max.

Quality
Value
Overall
Upload
Videos
  • X-1 Mini Flying Wing EPO 600mm

  • Skywalker X-1 Wing

Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

产品标签

使用空格分隔标签。使用单引号(')标注词组。