注册

Product Finder

设置

Useful links

Live Chat
 
[["US","AU","GB","DE"]]
注册

XK2845-B-3700KV无刷内转

XK2845-B-3700KV无刷内转

Discontinued Product

Please continue searching for a similar product.
Rating:
Stock:
OUT OF STOCK
重量:
152
SKU:
XK2845-B-3700
产品介绍

XK2845-B-3700KV无刷内转

规格。
#:4
最大安培:50A
最大电压:11.1V
最大功率:555W
转/ V:3700kv
阻力位:0.0147欧姆
空载电流:2.5A
尺寸:28.0毫米点¯x48.0毫米
安装孔的深度:4.5毫米
延长轴长度:15毫米
轴直径:3.175毫米
重量:123克

Product
Specifications

额外信息

  • 商品编号:
    XK2845-B-3700
  • Brand:
    N/A
  • 重量(g)
    152.00
  • 长度
    80.00
  • 宽:
    40.00
  • 高度:
    60.00
  • 千伏(转/ v)的
    3700.00
  • Unit Weight (g)
    118
  • 最大电流( A):
    50.00
  • 电阻( MH):
    19.00
  • 最大电压(V)
    11.00
  • 功率(W)
    555.00
  • 轴(MM):
    4.00
  • 长度B (毫米):
    48.00
  • 直径C(毫米)
    28.00
  • 可以长深(mm )
    46.00
  • 总长度E(毫米):
    60.00
Community
Discussions
Rate&
Review

撰写您自己的评测

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Very powerful motor for mini rc cars (1/16). Quality is great for the price and time will tell how this will handle good bashing. Recommend!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Not a bad motor by any means, though slightly unrefined - which I put down toi the bearings. Very powerful on a 3S for sure: I used it (with a water cooling jacket) on an outrigger I built along with a 50A water-cooled ESC. Pushing a 35 mm 1.6 pitch prop in a static test I was able to get the ESC wires to smoke and the ESC to reduce power on overload but it was reliable and cool. Getting 75KPH on the outrigger.
3S is definitely the limit: pumping more volts just heats it up and the bearings start to rattle. Without cooling it heats very rapidly even on no-load so some type of cooler is required whatever the application IMO.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Early days yet but it looks very promising. I am running it in HK wooden sponson race boat that I have modified with a Carbon/Kevlar skin and additional sponsons at the rear. The motor howls well running on a 3S. The only issue I had is the HK 28 sized motor cooler. BTW the motor itself was 28.03 AFTER chamfering the end of the can with some cunning to get the cooler past the O rings so be warned. After there is a mere 0.4mm of a gap around the periphery for water to flow around - to me this is compromise as it sets up too much back pressure and restricts flow through the ESC as well-=not a good idea. But this is the fault in the design of the cooler, not the motor.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
The spec and the product config table don't agree on the shaft size, but this motor does in fact have a 3.175mm shaft. A LOT of torque from this motor. I am running it in a tacon thriller.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Great little motor. Have it in a Tacon Valor 1/14th scale monster truck and it is awesome. It's paired with the 45A Turnigy Trackstar ESC and both stay cool. It's hard to keep the truck on its tires and will do back-flips on command. Love it!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Nice quality motor with plugs nicely attached as per the photo - I added a watercooling jacket for boat use and this motor doesn't dissapoint
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
nsane power.
With hk 60a esc, 2x(3s 1.4a 80c)nanotech lipo.
On my mini e revo.
100 kmh, low tempature, on long run time.
Thanks hobbyking.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
i have this one in a radjet 800 on 3s 2200ma with a 60 a hobbyking esc and 4.5x4.5 propeller......very good speed. nice sound!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Massive power, huge speed and great noise.
Used with 3S Lipo 2200maH and 60A esc. Great motor great speed.
Ordered two more to make 4wd offroading car designed by me.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Most turnigy stuff is metric but this is all standard... 1/8th shaft. Odd. Replacement bearings are 1/8 by 3/8 by 5/32 deep. Turnigy bearings suck so I'll be replacing them with teflon sealed ceramic bearings. To get the back end off take out the 3 screws and tap the shaft end gently with a hammer. There is glue inside that sometimes bonds to the back of the case, many light taps are better than a hard one. I bought 4 and will likely buy more if they hold up to some abuse.
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

产品标签

使用空格分隔标签。使用单引号(')标注词组。