注册

Product Finder

设置

Useful links

Live Chat
 
[["US","AU","GB","DE"]]
注册
Shipped From:
  • USA

牦牛54高的3D平面EPP套件W /电机和ESC

牦牛54高的3D平面EPP套件W /电机和ESC

Discontinued Product

Please continue searching for a similar product.
Rating:
Stock:
OUT OF STOCK
重量:
362
SKU:
Mini-Yak54
产品介绍
将鼠标悬停在您的厨房,刀口走廊,并显示您的鹞技能,家庭成员以前懒得前往飞机场在周日与您合作!
超轻型和小型微型3D牦牛是作为一个工具包,将带你1日晚完成。包括的是微特电机和ESC。只是包括您自己的接收和2.5G舵机。
由耐用的EPP发泡和碳纤维制成桅杆,这个小工具包将在每次反弹更多的惩罚!


产品规格:
长度:458毫米(18.0in)
翼展:418毫米(16.5in)
飞行重量:45〜53G(含电池)
电机:C05 3700kv无刷外转子
ESC:7Amp
道具:GWS EP5030
伺服:3x2.5g(不含税)

需要:
你自己的TX与RX
100〜200mAh的1〜2S 20C前列
3×2.5克伺服
Product
Specifications

额外信息

  • 商品编号:
    Mini-Yak54
  • Brand:
    N/A
  • 重量(g)
    362.00
  • 长度
    500.00
  • 宽:
    40.00
  • 高度:
    270.00
Community
Discussions
Rate&
Review

撰写您自己的评测

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Fantastic little model. I went with a Spektrum AR6400 setup using linear servos and a diode on the ve wire from the ESC to drop the voltage to around 4.2v. Using a 120mAh 2s Nanotech I came out at just under 45 grams and it flys really well with loads of power, it will hover on half throttle. I fly in a small hall (single badminton court size) and it is plenty slow enough for that space.
Keep it light and it is a great plane.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Just back from my first indoor session with this model. Very disappointed. There seems to be an issue with the ESC as the power drops after running for a second or so at full power. Not investigated fully yet but is not battery related. But the main problem is with the tendency for this model to drop a wing when turning. You can hold it level on the ailerons but then it will not turn tight enough. It came out at the top end of the weight range but even so, it seems to need to fly quite fast, not ideal for an indoor model! So I would suggest going for a larger model (I have the Piaget which is a fantastic model) where the wing loading is more likely to be lower and hence flying speed lower, even though the airframe may be bigger. Think this is just too small a model for this weight.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
motor and esc are out of order

I have to buy them
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
This plane is small so I found getting the right power setup without torque issues a problem, also it's a bit flimsy. Once it's all sorted she flies well.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
It flies, but the airframe are a bit wobbly.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
this is the same as the piaget,hover for almost 3 minutes but dont think you can fly it in your house as a regular airplane , it need a big space unless you want to practice hovering then its a good choice
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I have purchased this airplane, ordered on jan 7, today 31 hasent arrived but i call post office and they will send it to me fast, the thing is does the Esc have BEC ?, 5v linear ?.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Good indoor plane, one issue though, i claims to run on 1s lipo which is not true, the ESC requires ~7volts to opperate, bought 1s lipos because I wanted a really lightweight plane, but ESC refuses to start, So 2S minimun, otherwise a nice plane pre cut and pre taped except for rudder, but pick up hinge tape anyway really crappy tape pre-fitted not the greatest quality foam but for such a small plane it's good enough,
So I recomend it just don't pick up 1s LiPos.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Hallo

Flugzeug ist mit den empfohlenen Komponenten und leichten Verstrkungen (Motorbereich ca. 70g schwer (35 MHz Empfnger). Fliegt in der Halle daher recht flott. Kreise sind kein Problem. Querrollen gehen auch.
Der Motor wird hei (5 x 5 Luftschraube) die Spulen sind aber noch OK. Er ist auch Robuster als ein super Leichtbau Motor. Das Fahrwerk ist fr mein Gewicht zu weich.
Das EPP ist fr das Flugzeug gut geeignet und ist Hart im nehmen. Das erleichtert den anfang in der Halle.
Ich kann die Yak nur Empfehlen.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
This is an AWESOME indoor flyer! I've had a blast with it! It also flies great outdoors as long as the wind is light. Plenty of power to hover.
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

产品标签

使用空格分隔标签。使用单引号(')标注词组。