注册

Product Finder

设置

Useful links

Live Chat
 
[["US","AU","GB","DE"]]
注册

牦牛55M规模特技巴尔沙GP / EP1520毫米(ARF)

牦牛55M规模特技巴尔沙GP / EP1520毫米(ARF)

Discontinued Product

Please continue searching for a similar product.
Rating:
Stock:
OUT OF STOCK
重量:
5050
SKU:
349000005-0

battery
servo
motor
acc
产品介绍

牦牛55的设计是完全碾碎的设计,从它的前身,牦牛50.有人设计,以配合西方飞机的紧张,低速风格,1976年世界特技飞行锦标赛期间所看到的设计从根本上出发。

由此产生的设计,雅科夫列夫牦牛55,是单引擎全金属悬臂式单翼机。飞行员坐在飞机的厚实,完全对称翼中置之间的封闭式座舱。该发动机是相同的360马力Vedeneyev M14P引擎,使用的牦牛50。为简单起见,牦牛55具有一个固定的起落架钛弹簧主齿轮和尾轮。

原型的Yak-55在1981年5月首飞是在1982年世界特技飞行锦标赛中显示(但没有竞争)。而此时,在特技飞行风尚发生了变化,与时尚牦牛50回表现出高能量的特技飞行表演,导致牦牛55由苏联队被拒绝。因此牦牛55用新短跨度,面积减少翼和一个较薄的,但仍对称翼型部重新设计,给辊和速度的增加速率。苏联飞行表演队首次使用该机在1984年时,他们赢得了世界特技飞行锦标赛。

在80年代后期,已开始牦牛55,牦牛55M的修订版本,以满足需求从DOSAAF对于进一步提高辊速度的飞机,并与来自苏霍伊设计局设计的新的竞争。牦牛55M有一个更小的机翼导致的侧倾率要求的提高。它在1989年5月首飞,1990年进入生产。

我们的牦牛55M到达几乎准备好所需的只是最后的组装和设备安装飞行。全轻的机身是强大到足以采取硝基引擎,但对于电热转换足够的光线。真正衬托出这个模型是与彩涂玻璃钢罩和轮罩封顶多颜色覆盖方案。

在特技飞行,精确计算。这就是为什么我们已经包括了完整的硬件封装,具有重型控制角,伺服手臂扩展,拽拽电缆舵,并为所有表面球环节。机身大舱口允许您访问电子,检查你的油箱,如果转换为电换出电池。

飞牦牛55M是梦想。重量轻的结构产生的低翼负荷。大airfoiled尾翼做出精确天空牦牛舞55M。坚固的铝合金尾匕首起落架让您无需关闭问题粗糙跑道的运作。与所有我们已经挤进这一模式的强大功能,牦牛55M将很快成为你的最爱之一!

特征:
•几乎箭在弦上 - 完成最后组装,安装电子与电力系统的选择
•卓越的品质多色覆盖
•两片插件翅膀
•高品质的硬件包括花兰/球链路控制杆
•大型机身舱口检查电器,油箱,或更换电池
•Airfoiled控制面
•坚固的铝制起落架

眼镜:
翼展:1520毫米
长度:1490毫米
机翼面积:47.6dm2
飞行重量:2300〜2500克

要求:
4+通道发射机和接收机
5〜6个标准尺寸的高扭矩伺服
.46-52二冲程/ .70-80四冲程
接收器电池

Product
Specifications

额外信息

  • 商品编号:
    349000005-0
  • Brand:
    N/A
  • 容量(mAh)
  • 重量(g)
    5050.00
  • 长度:
    1150.00
  • 宽:
    250.00
  • 高度
    450.00
Community
Discussions
Rate&
Review

撰写您自己的评测

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
I am impressed by the quality,
I'm starting to assemble later this week.
engine becomes the ASP 61 should be enough power
I will return when I have started the installation.
the only thing I saw now was that the cover did not fit in with the color of the upholstery
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Got mine about a a week ago, finished building it now. Unlike Sid232, I opted to run only one elevator servo and had to use the optional elevator joiner. A little bit fiddely to get done right, but not very hard if you got some builders experience.

The rest of the airframe went together reasonable well and as far as I could see, there's really no need to go over all the glue joints as they seem reasonable glued. The wing bots might become an issue though, and just like Sid232 I plan on changing them for a tad more beefy ones.

I opted for the G60 with Yep 80A esc running 6s3300 JackPower lipo's to be on the light side, but it looks like I might be a bit tail heavy without extra weight in the front. Possible I'll use a 2sLiFE to power radio gear (Spektrum 7100 receiver, 4 x PowerHD 1201MG servos) strapped to the motor box to balance it out.

The colors are a bit off compared to the picture and the cowling and canopy doesn't match the pink 100pcnt but I'll live with that. I'll do an update when I've flown it, probable this weekend :)
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Well received it today and glad to be the first one to write a review. This will be a review about what is in box and a second review after test flight will be posted.

First color differs as in pics, i was expecting a funky hot pink but is actually more a candy purple which is ok tho, overall quality is fairly good, covering is great and paint job is acceptable. Comes with a CD manual, all hardware, servo clips and electric motor adapter, wheels look small for grass (2 inch) so will replace for 3 inch ones. To keep the plane within budget my set up will be as follows.

-TURNIGY propdrive 50-50 580kv 2000watts motor
-hobbyking 100 amps esc
-5v BEC
-5 x corona DS339HV servos (you will need 2 for elevator)
-60cm servo extensions
-probably a servo reverser for second servo in elevator (unless i use mix in my radio)
-2x y harness
-either 15x8 or 14x7x3 propellers
-64mm spinner.
-pilot figure with a max height of 90mm
-powered by 6s 5000mah lipo.

Overall so far happy with product, is a different plane compared to the usual ones around, size id good and looks amazing, i hope i can find some nice decals for it since the included ones are a joke, the only weak point so far for me are the thumb screws for the wings, they are very small in diameter and weak plastic, i will replace for hex metal ones as for 3d wings will be stressed hard.

will start assembling and a flight review will b
verified_user Quality
trending_up Value
playlist_add_check Overall
Upload
Videos
  • Yak 55M

Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

battery
servo
motor
acc

产品标签

使用空格分隔标签。使用单引号(')标注词组。