Become a Dealer Blog
Register

Total Price

$0.00

Cart 0 Cart 0 Loading...

Combat/Slope Soaring Wing Kit (EPP Foam w/CF Tube) 1000mm

Generating Links

Combat/Slope Soaring Wing Kit (EPP Foam w/CF Tube) 1000mm

 
Price:

Now save save $0.00 $0.00

$25.45
Already Purchased Discontinued Product

Please continue searching for a similar product.
1 year warranty
SKU:
Flyingwings-1
want FREE shipping? Click here to find out more!
Made from super resilient EPP foam, it's even more flexible than normal foam and can handle impacts without breaking! Being a flying wing its very durable and is a great way to learn high-speed flight plus its small enough to hide in the boot of your family car for those dull holidays!

This is a very light weight wing with carbon fiber inserts for strength. It's great for slope soaring and can be taped up for combat!For slope soaring you just need two servo, a reciever and battery. For higher speed flight, use a small 22+ diameter outrunner and a 12A esc.
 
Spec.
WingSpan: 1000mm
Flying Weight: 300g (With battery) 
 
Required:
Motor: 2208 1500kV  or 2205 2600kv Brushless outrunner
ESC : 12 ~15A
Airscrew: 7x35 or 5x3  
Servo: 2 x 5g
Battery: 7.4V 1500mah 20C
Your own TX & RX
 
  • Wingspan(mm) 1000.00
  • Red Eagle Wing - 1000 mm
  • Slope Soaring Wing
  • Combat/Slope Soaring Wing Kit
Upload video

Only registered users can upload video. Please, log in or register

Topics
Sort by
Most Recent Topics
* Nickname:

* Your Reply:


Please, enter the text shown in the image into the field below
*Verification Code:
Cancel
Submit
Post a new Topic
* Nickname:

* Your Topic:



Please, enter the text shown in the image into the field below
*Verification Code:
Post Topic

Only registered users can write reviews. Please, sign in or sign up

MartinKaRm | Verified Buyer

  • Overall
  • Quality
  • Value

Nice Wing for beginner and for some fun

Jul 30, 2017

I bought this for my first flying wing. Have flown several conventional layouts.
Instructions were OK, assembly easy. Although, the cavities for carbon rods should be cleaned from residual foam (thus 4 stars for quality).
I used 2206 2350KV motor from quad with 5045 bullnose prop and 20A ESC with 3S 1000mAh batteries. (also tried 1750mAh 3S). 9g servos and 600mW FPV transmitter with cloverleaf antenna and 15x15mm camera. Total weight 340g (430g with 1750 mAh). The canopy for battery and reciever is quite small and it takes effort to get CG correct. I had to mount FPV gear externally. The hatch lacks locking mechanism so I added a velcro strip.
Expo. should be used on transmitter otherwise it will wiggle quite violently. I used 65%, gives OK response near neutral and good maneuverability at the max travel.
It flies nice at lower speeds but is very vulnerable for turbulences and it flutters at higher speeds. Also quite lot of stick is needed to keep it level at roll axis. It does not have inheritably stable design because of minimal dihedral. As it tilts on one side a little, it will start rolling more. So i cut the wingtips at 45deg angle to tilt the winglets outward. This compensated the lack of dihedral to tolerable level. Now it is more plesant to fly with, so I do not have to spend so much awareness for keeping it leveled all the time. Thus 4 stars overall. It Glides OK though.
It flies nice and easy at 25% throttle and goes vertical with 100%.
With 1000mAh battery i got 20min of quarter throttle FPV flight with couple of vertical bursts.
And what I like most about this plane is that it is nearly indestructable. I have had several nosedive crashes and hard landings and it is still nearly unscrached. I would reccomend to tape the leading edges so they to not chip when landed on the gravel. Otherwise BOMBPROOF, I would say. Many fuselages would have been destroyed after such abuse. So this is a good for your first flying wing experience, I totally recomend this as entry-level wing or simlpe aircraft for some fun. It has lot of bang for that price (5 stars for that).

MartinKaRm | Verified Buyer

  • Overall
  • Quality
  • Value

Nice Wing

Jul 30, 2017

I bought this for my first flying wing. Have flown several conventional layouts.
Instructions were OK, assembly easy. Although, the cavities for carbon rods should be cleaned from residual foam (thus 4 stars for quality).
I used 2206 2350KV motor from quad with 5045 bullnose prop and 20A ESC with 3S 1000mAh batteries. (also tried 1750mAh 3S). 9g servos and 600mW FPV transmitter with cloverleaf antenna and 15x15mm camera. Total weight 340g (430g with 1750 mAh). The canopy for battery and reciever is quite small and it takes effort to get CG correct. I had to mount FPV gear externally. The hatch lacks locking mechanism so I added a velcro strip.
Expo. should be used on transmitter otherwise it will wiggle quite violently. I used 65%, gives OK response near neutral and good maneuverability at the max travel.
It flies nice at lower speeds but is very vulnerable for turbulences and it flutters at higher speeds. Also quite lot of stick is needed to keep it level at roll axis. It does not have inheritably stable design because of minimal dihedral. As it tilts on one side a little, it will start rolling more. So i cut the wingtips at 45deg angle to tilt the winglets outward. This compensated the lack of dihedral to tolerable level. Now it is more plesant to fly with, so I do not have to spend so much awareness for keeping it leveled all the time. Thus 4 stars overall. It Glides OK though.
It flies nice and easy at 25% throttle and goes vertical with 100%.
With 1000mAh battery i got 20min of quarter throttle FPV flight with couple of vertical bursts.
And what I like most about this plane is that it is nearly indestructable. I have had several nosedive crashes and hard landings and it is still nearly unscrached. I would reccomend to tape the leading edges so they to not chip when landed on the gravel. Otherwise BOMBPROOF, I would say. Many fuselages would have been destroyed after such abuse. So this is a good for your first flying wing experience, I totally recomend this as entry-level wing or simlpe aircraft for some fun. It has lot of bang for that price (5 stars for that).

Sinan | Verified Buyer

  • Overall
  • Quality
  • Value

Good

Dec 15, 2016

Hello,
Just to add; I got from EU warehouse,
Good flyer, glider + motor (25g 3S 15A esc)
I put 3S 1000mah to 3S 1300mah. Super
9g servos, better on top to avoid crashing when bottom landing . 6" prop
Flies OK, slow and fast, very reacting; so adjust servos to low response= better control
Also can upsize the battery room, adding foam spacer, then the cover .
Very Satisfactory, Nice to land motor off; good control.

vanbos | Verified Buyer

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Aug 30, 2016

flyes great only thing you need to upgrade your motormount if you using big motor

Rock Racer | Verified Buyer

  • Overall
  • Quality
  • Value

Customer Rated

Jul 30, 2016

Only 4 stars from me due to the False Advertising with regard the carbon spars. Which once replaced and upgraded have given a sufficiently stiff structure.
I have mine set up with a cheap 2204 2300KV Quad motor running a 5x4.5 Bullnose prop and 1500mAh 2S battery. I added about 10g of lead to the nose and have the CG at 140mm rear of the nose which has it gliding perfectly. Flying weight ATM is 305g.
I like it, Maidened this morning, it was a bit windy for a light plane, but the wing handled it well and after a good few flights, including crash landings eventuating in a broken prop, the battery still had plenty of charge and the wing unscathed. When the wind drops this arvo, I'll be out with it again.

| Verified Buyer

  • Overall
  • Quality
  • Value

Certified Buyer Rated

May 27, 2016

Getting the CG right on this wing is a tough job considering the space you get to place the flight parts. Also at high speeds, the whole wing will start to flap around, so definitely only for med-slow flight or slope soaring

Rcgary24 | Verified Buyer

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Apr 15, 2016

Good build , flies great! Instructions need a lil work but overall a great value!

Jonathan | Verified Buyer

  • Overall
  • Quality
  • Value

Customer Rated

Nov 26, 2015

I love this wing. Had mine 6 months and flown it everywhere in every condition. Handles wind with easy. Floats nice. Tough. Fits on my car parcel shelf nicely. I use a 2200 3cell battery, 30a ESC, and a little turnigy bell motor spinning a 7*4 prop. I can easily get 15 minute flights zipping around on it. Vertical climb. Nice rolls and loops. Deffo recommend for the most fun for the price.

Aaron | Verified Buyer

  • Overall
  • Quality
  • Value

Customer Rated

Jan 30, 2015

It was not what I expected from the photos. It is just normal old styrofoam (very cause). But anyway it should still be a good little slope soarer.

Stefano Barbero | Verified Buyer

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Jan 17, 2015

il secondo che acquisto..il primo ha fatto una brutta fine

Customer files
Combat Wing Aileron Moved to top Download [105]
Finished Wing Film 2 Download [56]
Combat Wing Battery & RX Bay Download [46]
Combat Wing Bottom View Download [77]
Combat Wing Electronics,Switch, Lost Mod Download [51]
Combat wing with Servo horn repair acces Download [93]
Combat Wing Covered Fiberglass tape1 Download [100]
Combat Wing Covered Fiberglass tape2 Download [120]
Finished Wing Film 1 Download [46]
taped bottom2 Download [1826]
  1. 1
  2. 2
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Related Tags