New Items Fórum
Registrovat

Total Price

0,00 €

Cart 0 Cart 0 Loading...

160W Rotary Tool w/ 33pc Set 110V

160W Rotary Tool w/ 33pc Set 110V

Shipped From:
  • USA
  • Global
QTY:

Now save Uložit 0,00 € 0,00 €

21,40 €
Stav:
Skladem
Váha:
931 g
SKU:
HK-170-110V
WANT FREE SHIPPING? Click here to find out more!
An indispensable tool for any hobbiests workshop. This quality built tool can drill, grind, cut, sand, polish and engrave just about anything and has a high torque 6 speed motor capable of running from 8,000 to 35,000rpm.
Package includes over 33 different cutting, grinding, drilling and sanding pieces.
Also included is a micro direct light which attaches to the drill and focuses light on the working area.

Specifications:
Voltage: 110V-60Hz
Plug Type: US
Maximum output: 160W
No load speed: 8,000-35,000rpm
Collet chuck capacity: 2.0-3.2mm dia.
  • SKU HK-170-110V
  • Brand -
  • Kapacita ( mAh ) -
  • Hmotnost ( g ) 931.00
  • Délka 305.00
  • Width 60.00
  • Výška 175.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

I recieved this today and i must say the quality of this 24 dollar dremel feels quite nice. The chuck and bits are balanced as well, though, at first, i did encounter an unbalanced drill but. I believe this may have been caused by me inserting the bit past the flat circumference to the actual grooved sides of the bit are. I haven't put this thing through strenous exercise so i can't say if it can take the heat. I'll definitely let you guys know if it breaks all-of-a-sudden.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I recieved this today and i must say the quality of this 24 dollar dremel feels quite nice. The chuck and bits are balanced as well, though, at first, i did encounter an unbalanced drill but. I believe this may have been caused by me inserting the bit past the flat circumference to the actual grooved sides of the bit are. I haven't put this thing through strenous exercise so i can't say if it can take the heat. I'll definitely let you guys know if it breaks all-of-a-sudden.

Purchased mine about 1 year ago-use it a lot. Runs very smooth and fits in all of the Dremel drill presses and router tables. I am very pleased with it and may buy another to leave permanently installed in my drill press- Five stars.Bob M..

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Purchased mine about 1 year ago-use it a lot. Runs very smooth and fits in all of the Dremel drill presses and router tables. I am very pleased with it and may buy another to leave permanently installed in my drill press- Five stars.Bob M..

This baby is great but the led batteries where DOA. sucks but i can buy cheap ones on ebaby!! It is worth the price you have to make a larger order 2.5kg to drop the shipping costs of this heavy item.



It runs fast and it sounds scary

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This baby is great but the led batteries where DOA. sucks but i can buy cheap ones on ebaby!! It is worth the price you have to make a larger order 2.5kg to drop the shipping costs of this heavy item.



It runs fast and it sounds scary

This is nearly identical to my dremel 400XPR. It looks the same, it's the same shape, it even fits in the same box. Most attachments are interchangeable, EXCEPT for the collet nut. This isn't important for most people, but my 400xpr set came with an extension that attaches where the collet nut usually goes, and it will not fit because it attaches to the OD of the collet...not the inside of the collet as most attachments. Other differences include the position of the on/of switch, and the position of the speed control knob.



My 400XPR had been sent in for warranty work twice since I bought it, and it finally went up in a puff of smoke. It had never been used excessively hard. I haven't used this new hobbyking rotary tool hard yet, but I feel like the bar was set pretty low by dremel. I'll never spend $100 on a dremel tool again when I could burn up 6 of these hobbyking tools and still have a few bucks left over from buying ONE dremel tool.



Great job hobbyking! I'm not sure how long this thing will hold up, but i'm certainly pleased so far!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This is nearly identical to my dremel 400XPR. It looks the same, it's the same shape, it even fits in the same box. Most attachments are interchangeable, EXCEPT for the collet nut. This isn't important for most people, but my 400xpr set came with an extension that attaches where the collet nut usually goes, and it will not fit because it attaches to the OD of the collet...not the inside of the collet as most attachments. Other differences include the position of the on/of switch, and the position of the speed control knob.



My 400XPR had been sent in for warranty work twice since I bought it, and it finally went up in a puff of smoke. It had never been used excessively hard. I haven't used this new hobbyking rotary tool hard yet, but I feel like the bar was set pretty low by dremel. I'll never spend $100 on a dremel tool again when I could burn up 6 of these hobbyking tools and still have a few bucks left over from buying ONE dremel tool.



Great job hobbyking! I'm not sure how long this thing will hold up, but i'm certainly pleased so far!

This thing doesn't compare to a dremel, but it's good for hobby applications. It's a bit heavier and bulkier and has less power, but seems like a solid-quality product. It also came with this cheap little work light but I can't figure out where to stick on the tool. Still handy to have. Would be nice if HK sold bits for this, so I could use them as space filler in future orders.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This thing doesn't compare to a dremel, but it's good for hobby applications. It's a bit heavier and bulkier and has less power, but seems like a solid-quality product. It also came with this cheap little work light but I can't figure out where to stick on the tool. Still handy to have. Would be nice if HK sold bits for this, so I could use them as space filler in future orders.

I ordered one, and was so impressed with the quality, I bought another one for the workshop.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I ordered one, and was so impressed with the quality, I bought another one for the workshop.

great add on for my tools on the bench for fast cutting, with out having to change out my other Dremel set.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

great add on for my tools on the bench for fast cutting, with out having to change out my other Dremel set.

If someone wants to know, this handtool fits OK in the Dremel 220 Workstation, just need to put it in sideways.

The Dremel chuck, however, didn't fit.



Se algum quiser saber, essa ferramenta encaixa perfeitamente no suporte vertical da Dremel. S necessrio por de lado.

J o mandril rpido da Dremel no encaixou.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

If someone wants to know, this handtool fits OK in the Dremel 220 Workstation, just need to put it in sideways.

The Dremel chuck, however, didn't fit.



Se algum quiser saber, essa ferramenta encaixa perfeitamente no suporte vertical da Dremel. S necessrio por de lado.

J o mandril rpido da Dremel no encaixou.

A top notch quality item. looks and feels and runs like a Makita tool. Nice detachable worklight and variable rpm control also. I also have a Dremel at work, and this HK unit is nicer!

Mine came with a std US plug - no need to modify.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

A top notch quality item. looks and feels and runs like a Makita tool. Nice detachable worklight and variable rpm control also. I also have a Dremel at work, and this HK unit is nicer!

Mine came with a std US plug - no need to modify.

Just got it today.

In previous reviews I saw that north american version comes with Europian plug. Nope not any more. This one I got comes with proper US/Canada plug.

Works very good so far and also got bunch of attachments.

Over all very good purchase for really good price.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Just got it today.

In previous reviews I saw that north american version comes with Europian plug. Nope not any more. This one I got comes with proper US/Canada plug.

Works very good so far and also got bunch of attachments.

Over all very good purchase for really good price.

  1. 1
  2. 2
  3. 3
  4. 4
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!