New Items Fórum
Registrovat

Total Price

0,00 €

Cart 0 Cart 0 Loading...

2.4Ghz SuperMicro Systems - Single Linear Servo

2.4Ghz SuperMicro Systems - Single Linear Servo

Discontinued Product

Please continue searching for a similar product.
SKU:
HK1300
WANT FREE SHIPPING? Click here to find out more!

2.4ghz SuperMicro Systems - Single Linear Servo

Specs:
Size: 18.1mm x 15.2mm x 7.8mm
Servo throw: 8mm
Weight: 1.1g (wires not included)
Torque: 35g @ 4.2V
Speed: 0.12s @ 4.2V
Voltage: 3.0V~4.2V

Includes:
1 x HK1300 Single Linear Servo

The JST connector on this servo can also be used with the HK104RX or the Spektrum AR6400.

  • SKU HK1300
  • Brand -
  • Kapacita ( mAh ) -
  • Hmotnost 8.0000
  • Délka 0.00
  • Width 0.00
  • Výška 0.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Weight as is: between 1,30 and 1.35g.
These servos are good, precise and strong enough, but they need a (handmade) small washer to inhibit jitter. Place the washer between the linear case and the end cap. See files.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Weight as is: between 1,30 and 1.35g.
These servos are good, precise and strong enough, but they need a (handmade) small washer to inhibit jitter. Place the washer between the linear case and the end cap. See files.

I am sorry to report, that unlike other reviews, I say "THE KING IS NAKED".

This servo has faulty design (in my opinion).

If the servo jams, binds, encounters too much external resistance to

horn movement - it will butn out a FET in 2-3 secconds.

maigc smoke escapes too easily. other brands have protection against

such events..



I will not use the 5 remaining serov's I have (out of 7 I ordered and burnt

2).

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I am sorry to report, that unlike other reviews, I say "THE KING IS NAKED".

This servo has faulty design (in my opinion).

If the servo jams, binds, encounters too much external resistance to

horn movement - it will butn out a FET in 2-3 secconds.

maigc smoke escapes too easily. other brands have protection against

such events..



I will not use the 5 remaining serov's I have (out of 7 I ordered and burnt

2).

What a disappointment. I bought two servos and both jittered a lot and then went to full travel. This happened many times on the bench so I never used them in a plane. I tested with a servo tester, so its not the receiver thats the problem.
If HK fixes the jitter issue I will try again as they seem to be small, light and a good price

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

What a disappointment. I bought two servos and both jittered a lot and then went to full travel. This happened many times on the bench so I never used them in a plane. I tested with a servo tester, so its not the receiver thats the problem.
If HK fixes the jitter issue I will try again as they seem to be small, light and a good price

Little and light servo. Have use it on a few indoor aircraft, unfortunately the servo jitters too much and if it get stuck it will burn very easily.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Little and light servo. Have use it on a few indoor aircraft, unfortunately the servo jitters too much and if it get stuck it will burn very easily.

I know about many bad reviews. Probably I had good luck, mine work fine with Efilte rx. First servos I bought from HK which have the JST Nano plug which fits for micro Eflite rx.

Could HK also sell these plugs? Would be fine for changing plugs on other servos.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I know about many bad reviews. Probably I had good luck, mine work fine with Efilte rx. First servos I bought from HK which have the JST Nano plug which fits for micro Eflite rx.

Could HK also sell these plugs? Would be fine for changing plugs on other servos.

Customer files
Manual Download [1713]
handmade washer Download [6]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!