New Items Fórum
Registrovat

Total Price

0,00 €

Cart 0 Cart 0 Loading...

2-Axis Brushless Camera Gimbal Stabilization Control Board w/IMU

2-Axis Brushless Camera Gimbal Stabilization Control Board w/IMU

Discontinued Product

Please continue searching for a similar product.
SKU:
9387000019-0
WANT FREE SHIPPING? Click here to find out more!

This is a brushless gimbal control board which utilizes a 6-axis gyro/accel with Motion Processing Unit to stabilize your camera gimbal while in flight. It offers highly precise and smooth brushless gimbal stabilization at a very low price.

Features:
• ATMega328P microcontroller
• Onboard FT232RL for debug
• 2~6 cells lipoly input
• Multiport
• UART port
• MPU6050 6-axis gyro/accel with Motion Processing Unit
• On board logic level converter

Specs:
Dimensions: 50x50x9mm
Weight: 25g (including IMU board)

 

Note: This is a quality unit using new and genuine components from FTDI, TI and FCI. Do not be caught out with low quality equivalents using fake or recycled components. Be on the lookout for any board using components without part numbers printed on them or model and make information scratched off.

 

  • SKU 9387000019-0
  • Brand -
  • Kapacita ( mAh ) -
  • Hmotnost 24.0000
  • Délka 80.00
  • Width 20.00
  • Výška 75.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

muy buen estabilizador, cuesto mucho echarlo a andar no es sencillo, se requiere paciencia y conocimientos previos del hobby, una vez configurado funciona perfectamente. Las entradas de pitch o roll que binen en el circuito impreso no sirven, hay que conectar los cables en las entradas A1 y A2 del circuito impreso.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

muy buen estabilizador, cuesto mucho echarlo a andar no es sencillo, se requiere paciencia y conocimientos previos del hobby, una vez configurado funciona perfectamente. Las entradas de pitch o roll que binen en el circuito impreso no sirven, hay que conectar los cables en las entradas A1 y A2 del circuito impreso.

Total waist of money & a lot of time!!!!!! Just don`t buy this board, you`ll spend hours trying to make it work until you just put it to garbage!!!!! if it works, why don`t they install a basic firmware before selling???
Hey HK, you forgot to put zero crown in your list...

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Total waist of money & a lot of time!!!!!! Just don`t buy this board, you`ll spend hours trying to make it work until you just put it to garbage!!!!! if it works, why don`t they install a basic firmware before selling???
Hey HK, you forgot to put zero crown in your list...

Not easy to get this board going for a newbie...
None of the files on this site easy to follow, not even a file with the same board...
I have the usbasp adapter I previously used to flash a KK board, but no info for connection available.
Should have bought a rtr board instead....

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Not easy to get this board going for a newbie...
None of the files on this site easy to follow, not even a file with the same board...
I have the usbasp adapter I previously used to flash a KK board, but no info for connection available.
Should have bought a rtr board instead....

The board itself is fine. It works for the most part really well. The software is a whole nother story. Just do yourself a favor and get the USBAVR programmer and flash it with nulled. It will save you some stress.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

The board itself is fine. It works for the most part really well. The software is a whole nother story. Just do yourself a favor and get the USBAVR programmer and flash it with nulled. It will save you some stress.

lost money and time if you buy this control
"" mission impossible '''
:)
to set up this control

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

lost money and time if you buy this control
"" mission impossible '''
:)
to set up this control

I have spent countless hours trying to 'tune' this controller. It is an utter nightmare. The so called documentation on the wiki is very very poor. I don't recommend this. It is ridiculously hard to setup. I still have not achieved a working setup.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I have spent countless hours trying to 'tune' this controller. It is an utter nightmare. The so called documentation on the wiki is very very poor. I don't recommend this. It is ridiculously hard to setup. I still have not achieved a working setup.

Works perfectly. Flashed SimpleBGC firmware via USB. Soldered pitch cable to control pitch from reciever. Works brilliantly with 2208 motor gimbal.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Works perfectly. Flashed SimpleBGC firmware via USB. Soldered pitch cable to control pitch from reciever. Works brilliantly with 2208 motor gimbal.

Perfect product, I love it, it was not easy to setup, but with latest firmware 51, and correct setup with brugi sw and a very low P (PID) now it works perfect with my cheap HK Carbon Gimbal and my Gopro Hero 3.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Perfect product, I love it, it was not easy to setup, but with latest firmware 51, and correct setup with brugi sw and a very low P (PID) now it works perfect with my cheap HK Carbon Gimbal and my Gopro Hero 3.

I received the V2 version NOT the V3 as advertised here.
Older product and more troublesome to update/configure
it will probably work i guess, still have to test it.
Beware!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I received the V2 version NOT the V3 as advertised here.
Older product and more troublesome to update/configure
it will probably work i guess, still have to test it.
Beware!

You will receive aBGC 2.2 Brushless Camera Gimbal AIO Controller alexmos V2.2 Firmware w/ Sensor Voltage Step-Down Module which cheap clone

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

You will receive aBGC 2.2 Brushless Camera Gimbal AIO Controller alexmos V2.2 Firmware w/ Sensor Voltage Step-Down Module which cheap clone

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6
Customer files
Martinez Manual Download [1485]
Connection Diagram Download [129]
blg-tool info Download [23]
Martinez Manual- Chinese Download [716]
PID Tuning Guide Download [38]
Anleitung Brushless Gimbal Controller V3 Download [1438]
BruGi_Martinez Set-Up Links - 2014 Download [23]
Martinez V3 pinout Download [200]
USBASP connection Download [11]
Martinez Gimbal Controller link Download [26]
  1. 1
  2. 2
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!