New Items Fórum
Registrovat

Total Price

0,00 €

Cart 0 Cart 0 Loading...

25.2x26mm 2200kv Brushless Outrunner Motor

25.2x26mm 2200kv Brushless Outrunner Motor

Discontinued Product

Please continue searching for a similar product.
SKU:
PM19M-2400
WANT FREE SHIPPING? Click here to find out more!

25.2x26mm 2200kv Brushless Outrunner Motor

Specs:
RPM/v: 2200kv
Max Power: 100W
Dimensions: 25.2x26mm
Shaft: 3.0mm
Voltage: 2 cell ~ 7.4V
Weight: 25g

Prop Test Data:
6030 7.4v 6.1A 45.1W 12540rpm 246g  
6030 8.0v 6.7A 53.6W 13320rpm 276g  
7035 7.4v 8.1A 59.9W 11460rpm 324g  
7035 8.0v 8.6A 68.8W 12060rpm 352g  

  • SKU PM19M-2400
  • Brand -
  • Hmotnost 30.0000
  • Délka 70.00
  • Width 35.00
  • Výška 50.00
  • Kv (rpm / v) 2200.00
  • Maximální proudy (A) 12.00
  • Odpor ( mh) 0.00
  • Maximální napětí ( V) 8.00
  • Výkon ( W ) 100.00
  • Hřídel A ( mm ) 3.00
  • Délka B ( mm ) 26.00
  • Průměr C ( mm ) 25.00
  • Může Délka D ( mm ) 25.00
  • Celková délka E ( mm ) 31.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Gehaeuse aus Kunststoff - Gewicht 25g inkl. 6cm Kabel,

Lochradius am Befestigungsflansch 15mm mit 2,5mm Bohrungen(hat aber auch aber auch 2mm Bohrungen 2 mit 7,75mm und 2 mit 8,75mm Radius - waere geignet fr 2,5mm Gewinde und Befestigung von hinten)

Motorgehaeuse 26mm Durchmesser,

Freie Achse 3mm Durchmesser 5,2mm lang - reicht fr Mitnehmerbefestigung,

Propsaver von 5,5 auf 9,5mm mit 2 2mm Schrauben

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Gehaeuse aus Kunststoff - Gewicht 25g inkl. 6cm Kabel,

Lochradius am Befestigungsflansch 15mm mit 2,5mm Bohrungen(hat aber auch aber auch 2mm Bohrungen 2 mit 7,75mm und 2 mit 8,75mm Radius - waere geignet fr 2,5mm Gewinde und Befestigung von hinten)

Motorgehaeuse 26mm Durchmesser,

Freie Achse 3mm Durchmesser 5,2mm lang - reicht fr Mitnehmerbefestigung,

Propsaver von 5,5 auf 9,5mm mit 2 2mm Schrauben

I'm not sure if there is a wiring problem like the other reviewer mentioned. But I can be sure that 3 of my 4 motors failed. Now they run at 1/2 speed compared to the 4th good motor. The electric power is instead used to make them hot. When I took one apart I am certain 3 of the 10 tiny magnets are demagnetized completely. The heat is a symptom of the degmagnetized motor. But it could also be a cause of it? Not sure which came first. Certainly the motor will not run fast with 3 bad magnets. This happened within 30 days of my purchase.

HobbyKing will you help me?

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I'm not sure if there is a wiring problem like the other reviewer mentioned. But I can be sure that 3 of my 4 motors failed. Now they run at 1/2 speed compared to the 4th good motor. The electric power is instead used to make them hot. When I took one apart I am certain 3 of the 10 tiny magnets are demagnetized completely. The heat is a symptom of the degmagnetized motor. But it could also be a cause of it? Not sure which came first. Certainly the motor will not run fast with 3 bad magnets. This happened within 30 days of my purchase.

HobbyKing will you help me?

I bought 4 of these and the plywood frame since the 535 frame kit had been out of stock for months. One of the motor had an internal short. The root cause is probably someone decided to cut the solder joint at the star winding common point short and capped with heat shrink. It ended up only 4 or 5 wires out of 15 were actually soldered together at the cut short joint. With only 1/5 of the copper in service, it quitted in mid throttle under load and smoked on further test. Wiring is shortcircuiting between 2 poles.

All 4 motors came with shafts not fully inserted. And one has a very uneven rotor ring. Obviously we had some QC problem here.

Not sure what kind of warranty I can get. It is too expensive to ship anything back for replacement.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I bought 4 of these and the plywood frame since the 535 frame kit had been out of stock for months. One of the motor had an internal short. The root cause is probably someone decided to cut the solder joint at the star winding common point short and capped with heat shrink. It ended up only 4 or 5 wires out of 15 were actually soldered together at the cut short joint. With only 1/5 of the copper in service, it quitted in mid throttle under load and smoked on further test. Wiring is shortcircuiting between 2 poles.

All 4 motors came with shafts not fully inserted. And one has a very uneven rotor ring. Obviously we had some QC problem here.

Not sure what kind of warranty I can get. It is too expensive to ship anything back for replacement.

This is the motor that comes with the super mini quad HKing sells. After 2 weeks it arrived at my house with 4 of these motors out of the 4 1 of them was no good but I am impressed with the other 3. They are super light for the power With a 12A esc and a 6x5 e prop I put them to the test on 2s and 3s. Lots of power and they keep very cool. Only down side is they are not balanced very well. But I have already ordered more

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This is the motor that comes with the super mini quad HKing sells. After 2 weeks it arrived at my house with 4 of these motors out of the 4 1 of them was no good but I am impressed with the other 3. They are super light for the power With a 12A esc and a 6x5 e prop I put them to the test on 2s and 3s. Lots of power and they keep very cool. Only down side is they are not balanced very well. But I have already ordered more

Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!