New Items Novinky Fórum
Registrovat

Total Price

0,00 €

Cart 0 Cart 0 Loading...

3D Printer Full Graphic Smart Controller ( RAMPS RepRap )

3D Printer Full Graphic Smart Controller ( RAMPS RepRap )

Already Purchased Discontinued Product

Please continue searching for a similar product.
SKU:
438000078-0
WANT FREE SHIPPING? Click here to find out more!

The Full Graphic Smart Controller is an upgrade to the Smart Controller with a better visual interface.

The controller provides a graphical user interface to control your 3D printer without the need of a direct computer connection. The Smart Controller has an integrated SD card reader, Rotary encoder with push button and a 128x64 dot matrix LCD display, allowing all types of actions from calibration to axis movements and direct G-code execution from the SD card slot.

The Full Graphic Smart Controller is designed to plug directly into the RAMPS or Ultimaker type of breakout shields for direct 3D printer control.

Includes:
Smart Adapter (Fully Assembled)
Smart Controller with built in SD Card slot (Fully Assembled)
Set of 320mm Cables (Assembled)

Firmware:  Marlins' sources

http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller

  • SKU 438000078-0
  • Brand -
  • Kapacita ( mAh ) -
  • Hmotnost 225.0000
  • Délka 145.00
  • Packaging Width 55.00
  • Výška 105.00
  • DIY 3D Printer
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

affichage install sans probleme sur mon imprimante 3d prusa i3.cela me permet d'imprimer sans allumer l'ordinateur.attention a bien choisir la carte sd car toutes les classes de carte ne sont pas compatibles,j'ai eu du soucis pour trouver la bonne.pour le mettre en route il suffit de le brancher sur la carte ramps puis dans arduino il fauta jouter la bilbliotheque telechargeable sur github.ensuite televerser et normalement ca fonctionne.il est possible aussi d'ajouter un logo personnalis qui s'affiche au demarrage de l'imprimante.en tout cas j'en suit content ca fat bien le job et permet de se passer du pc pendant que l'imprimante tourne...

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

affichage install sans probleme sur mon imprimante 3d prusa i3.cela me permet d'imprimer sans allumer l'ordinateur.attention a bien choisir la carte sd car toutes les classes de carte ne sont pas compatibles,j'ai eu du soucis pour trouver la bonne.pour le mettre en route il suffit de le brancher sur la carte ramps puis dans arduino il fauta jouter la bilbliotheque telechargeable sur github.ensuite televerser et normalement ca fonctionne.il est possible aussi d'ajouter un logo personnalis qui s'affiche au demarrage de l'imprimante.en tout cas j'en suit content ca fat bien le job et permet de se passer du pc pendant que l'imprimante tourne...

Works like a charm with marlin. I really like the blue colour of the LCD!
Printing with a Gcode from SD card is really easy and I don't have to leave my PC turned on overnight anymore (-;. There are many different cases on thingiverse for this controller.
just activate the display in arduino and load U8glib into the library.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Works like a charm with marlin. I really like the blue colour of the LCD!
Printing with a Gcode from SD card is really easy and I don't have to leave my PC turned on overnight anymore (-;. There are many different cases on thingiverse for this controller.
just activate the display in arduino and load U8glib into the library.

Great price for the full graphic lcd and cd card upgrade. The cables are a bit short for my prusa i3 setup. Both cables use 10 pin plugs so watch out you don't cross over the cables. I am using the repetier firmware, which uses a very simple screen layout.
I needed to change the debounce settings in the firmare for the rotory switch.
Its a very handy option for the printer, it makes changing settings on the fly very easy.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Great price for the full graphic lcd and cd card upgrade. The cables are a bit short for my prusa i3 setup. Both cables use 10 pin plugs so watch out you don't cross over the cables. I am using the repetier firmware, which uses a very simple screen layout.
I needed to change the debounce settings in the firmare for the rotory switch.
Its a very handy option for the printer, it makes changing settings on the fly very easy.

Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save

Radio Control Planes, Drones, Cars, FPV, Quadcopters and more - Hobbyking