Registrovat

Product Finder

Nastavení

Useful links

Live Chat
 
[["US","AU","GB","DE"]]
Registrovat

3W White LED Alloy Strip 120mm x 12mm (3s Compatible)

3W White LED Alloy Strip 120mm x 12mm (3s Compatible)

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
Váha:
10 g
SKU:
371000070
Popis
produktu

3W White LED Alloy Strip 120mm x 12mm (3s Compatible)

Specs:
Dimensions: 120 x 12mm
Weight: 7g
Connector: JST
beam angle: 120 degree             
Power: 3w
color temperature: 6000-6500 ± 200K               
Voltage: 11.1v-13.5v (3s Lipoly)               
Current: 280mA            
Luminous flux: 240-270LM            
Color rendering index: 70-85                
Material: aluminum plate                
Service life: 50000 hours                
Operating temperature: -20 - +60 degree Celsius

*Note: please make sure current draw is lower than 280mA or you risk damaging the LED strip
Product
Specifications

Další informace

  • SKU:
    371000070
  • Brand:
    Ne
  • Hmotnost ( g )
    10.00
  • Délka
    125.00
  • Width:
    5.00
  • Výška:
    20.00
Community
Discussions
Rate&
Review

Napište vlastní recenzi

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
bright as frig and cheap as yogurt. also waterproof! mine bent a little, but it's still shining. submerged several times and numerous impacts. i use it as a frontlight in my rc car.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Very very bright even under high sun
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
with 2s it is super bright, on 3s is it to much for my eyes and to hot for my model and on 3s it needs 7W! I think to much for a long live. Realy cool stuff. I love them and have 14 of them. On 3s I have 2 diodes bevor them, than is the temperature ok and my eyes going not blind.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Very successful to understand orientation of multi copter
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Nhradn hriadel na motor NTM 3548-900ot/V.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I like these.. run at 9 volts DC.. or they will get much too hot. Need cooling at 11 volts. Pay attention to polarity. Some of the JST's are improperly wired
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
0.8A draw, 9.8W consumption on 3s. As others have stated, the JST connector is backward. The LED is labelled correctly, they just got a bad bin of connectors. Very bright! I got it for a 3D printer but it looks to be too much so I'll likely use one on the lower leading edge of each wing as landing lights for dark FPV flights. It will ABSOLUTELY NEED HEATSINKING or adequate air flow to keep it from overheating on 3s!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
very bright at 12v, it will almost blind you! it gets too hot to touch in just a few seconds
tested at 7.6v (2s lipo) lights up decently and mildly bright, not hot. so i think about 9v should give it a good brightness without too much heat
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
ridiculously bright!!! by far the brightest of any LED i have ever purchased from hobby king.......seriously blinding........as well as get very very very hot.
verified_user Quality
trending_up Value
playlist_add_check Overall
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Štítky produktu

Štítky oddělujte mezerou. Víceslovné uzavřete v apostrofech (').