HobbyKing 3D Printer Filament 1.75mm ABS 1KG Spool (Red P.186C)
HobbyKing have come out with a huge new range of 3D Printer Filaments at prices that will have you printing all day and all night.
The range covers PLA, ABS, Flexible, Color Changing, Luminous, Nylon, Polycarbonate, Acetal (POM), Metal Composite and even a water soluble filament for printing molds. So there is a filament for every project you have in mind. HobbyKing filaments have a stable melting point, good round shape and most importantly a 0.05mm uniform diameter tolerance for a consistent flow rate.
ABS is a fantastic plastic for mechanical real world use prints where a durable item is required. It has some give under stress making it perfect for multirotor frames and gears. ABS also has a higher melting point making it more suitable for some applications.
For printing with ABS it is recommended to have a heated print bed or Kapton Tape for proper bed adhesion. ABS can also have a slight odor when printing so a well ventilated room is recommended, please note that it has no odor when the print is finished.
ABS is slightly harder to get dialed in unlike PLA, but once set up the printing is consistent and the prints are truly real world useable. Other popular uses for this material are R/C spare parts, building blocks and toys for the kids.
3D printing is a fun and exciting hobby with a wide range of uses from prototyping parts to making toys for the kids. Picking the right filament for your application is very important.
• Stable melting point
• Good round shape
• Uniform diameter tolerance 0.05mm
• Consistent colors
Filament Material: ABS
Melting Point: 230°C
Print Temperature: 230-260°C
Filament Diameter: 1.75mm
Color: Red P.186C
Hmotnost ( g )
matière parfait pour nos impression 3D, utilisé sur malyan M150, M180 et minifabrikator!! prix plus que attractif dans un support parfait. j'adore !! je le recommande les yeux fermésNice filament, havent had any problems with it yet but you need to print it in an enclosure with a bed temp of about 100 degrees and between 235 and 240 degrees extruder temp with abs juice on a glass bed.
Don't forget to use it in a well ventilated room or suck the vapours out of the enclosure out of a window!
I am using a small 60mm fan on 7 volts and a vacuum cleaner hose to suck out the vapours while maintaining a steady temp inside
I am using a malyan m150 i3 with 40mm/s printspeed