New Items Fórum
Registrovat

Total Price

0,00 €

Cart 0 Cart 0 Loading...

Accessory pack for TR2213/20

Accessory pack for TR2213/20

Shipped From:
  • Global
QTY:

Now save Uložit 0,00 € 0,00 €

3,67 €
Stav:
Skladem
SKU:
031000154
WANT FREE SHIPPING? Click here to find out more!

Accessory pack for TR2213/20 motor.


Standard pack of accessories for the TR22 motors. Everything you would need is included with shrink tube, bullet connectors male and female, cross mount, spare shaft, prop mounts, screws, and more.

All high quality components

Specs:
Shaft Diameter: 3mm
Shaft Length: 45mm
Cross Plate Bolt Holes: 34mm
Prop adapter shaft size: 4.9mm x 19mm

  • SKU 031000154
  • Brand -
  • Hmotnost 28.0000
  • Délka 70.00
  • Packaging Width 15.00
  • Výška 45.00
  • Kv (rpm / v) -
  • Maximální proudy (A) -
  • Odpor ( mh) -
  • Maximální napětí ( V) -
  • Výkon ( W ) -
  • Hřídel A ( mm ) -
  • Délka B ( mm ) -
  • Průměr C ( mm ) -
  • Může Délka D ( mm ) -
  • Celková délka E ( mm ) -
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

great kit has all of the proper fittings

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

great kit has all of the proper fittings

I've a number of these on various quads, hexas and octos. I use them with the D2830/11 1000Kv Turnigy Aerodrive motors. They are a bit better than the standard prop adapters that come with those motors, although I've never had a problem with the standard adapters, either. Chances are you will have one screw in the bunch that won't drive all the way into the adapter. This happens to me on almost every one of these that I've ordered. What I usually to to mitigate this problem is to use the blue flanged washer (it's on the right hand side of the picture) that comes in the kit, and place it on the shaft, small side down. This ensures that the prop lies flat, instead of being cocked at an angle. I have had one of these come loose during a flight, and if I hadn't been very close to the ground, I probably would have lost my Nex5, the lens, a full FPV system and most of the quad. Be aware of this. It was checked for tightness the night before, so just be careful.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I've a number of these on various quads, hexas and octos. I use them with the D2830/11 1000Kv Turnigy Aerodrive motors. They are a bit better than the standard prop adapters that come with those motors, although I've never had a problem with the standard adapters, either. Chances are you will have one screw in the bunch that won't drive all the way into the adapter. This happens to me on almost every one of these that I've ordered. What I usually to to mitigate this problem is to use the blue flanged washer (it's on the right hand side of the picture) that comes in the kit, and place it on the shaft, small side down. This ensures that the prop lies flat, instead of being cocked at an angle. I have had one of these come loose during a flight, and if I hadn't been very close to the ground, I probably would have lost my Nex5, the lens, a full FPV system and most of the quad. Be aware of this. It was checked for tightness the night before, so just be careful.

Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!