The Afro Race Spec 4 x 20A ESC is the perfect power solution for your quadcopter by incorporating 4 x 20A ESC's into a single compact unit. This allows for a super neat install and also allows you to mount the ESC in the middle of the frame instead of having to mount an ESC on each arm.
Developed from the ground up, the design team wanted to build a truly Multi-rotor specific ESC that would offer the best performance and value on the market today. We wiped the slate clean and looked to the community for inspiration and help in designing an ESC that truly could be known as “The Multi-rotor ESC”
Enter Simon and Hamasaki AKA SimonK and timecop. This combination of hardware and firmware expertise in conjunction with the Hobbyking in house engineering team gave us the edge needed to develop an ESC like no other and hence the Afro series was born.
Boasting high efficiency, all N-channel MOSFET design, jitter-free hardware PWM input, and smooth power response the Afro ESC series are set to change the expectations of multi-rotor pilots around the globe. The Afro ESC series ship with multi-rotor specific SimonK software preloaded! No need to reflash.
For added convenience the Turnigy USB linker can be used via the PWM signal lead for any future software updates eliminating the need for complicated flashing jigs or the need to cut open the heat shrink.
This version of the Afro multi-rotor speed controller has been developed especially for the growing 250 FPV racing class. The demands of the FPV racer are very high but this speed controller ticks all the right boxes, it is very small and lightweight but still packs a mighty punch.
• Supports Oneshot, SimonK and BLHeli, USB flashing
• Race spec set up, ideal for 250 class racers
• Compact 4 in 1 style ESC
• Boasting high efficiency all N-channel MOSFET design
• Super smooth power response
Cells: 2S-4S Lipo
BEC type: Linear
Cutoff Voltage: N/A
Input Frequency: 1K
Size: 43.2 x 43.2mm (30.5mm Mounting post)
Connectors: 2mm bullet type
Hmotnost ( g )
Quality is OK and manufacturing quality of this esc is good, there are some minor inconveniences with arming, since sometimes 1 motor seems to fail to arm at random, but those all are minor problems. The big problem is this - this ESC is designed to be in the center of copter and has the same mounting pattern as flight controllers, and most frames only has 1 FC mount sport. So natural solution would seem to mount ESC and FC on top of each other, but that causes a problem - since they are so close together, FC falls within the ESC magnetic field generated from powering the motors, and that magnetic field messes up FC's sensors.
To sum up - everything is fine with this ESC, if your frame has a spot to mount it and that mount sport is not the same you use to mount your FC.Great module for sub-250mm mini quads.I'm using mine on a ZMR180 frame and it flies beautifully. Having a single module that mounts under the flight controller (I used nylon spacers to stack them) makes for a very quick and neat build.
Do take note of the slight overhang of the board past its mounting holes. This made the board too large for a 150mm quad frame I wanted to use it for, so I'd love to see a 12A version of this board with the same dimensions as a Naze32 or SP Racing EVO.Just received my afro race spec 20a quattro esc. The first thing i mentioned when i took a good look at it are the really thiny wires for the power supply. I immediately desoldered them and soldered thicker wires in places. I also flashed it with BLheli in the same time. The type of esc that i chose in the menu to flash was AFRO ESC 20A MULTI. I couldn't find this anywhere so i took the shot. After everything was mounted i took it for a maiden flight and i'm happy with my first impression. I like this esc cause i stacked it under my flightcontroller and the arms are very clean now without esc's there.I have this esc my only issue so far is that there are no programming instructions. I would like to see a manual on how to program this esc. I have a turnigy programming card however that did not work. All of my motors are not spinning up and my motors are getting really hot.