Registrovat

Product Finder

Nastavení

Useful links

Live Chat
 
[["US","AU","GB","DE"]]
Registrovat
Shipped From:
  • Global

Alloy stick motor mount. (to suit 10mm wide stick)

Alloy stick motor mount. (to suit 10mm wide stick)

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
Váha:
19 g
SKU:
0190065
Popis
produktu
Made from alloy the mount is very light yet still strong.
Mount dimensions are 30x20mm, suits 10mm sticks and has motor mount hole dimension of 19mm and 22mm.
Perfect for most small brushless motors.
Because the stick bracket is a clamp system, a variety of stick sizes can be used.
 
Stick size: 10mm wide
Motor mounts: 19 or 22mm
Material: Alloy
 
Product
Specifications

Další informace

  • SKU:
    0190065
  • Brand:
    nedefinováno
  • Kapacita ( mAh )
    Ne
  • Hmotnost ( g )
    19.00
  • Délka:
    119.00
  • Width:
    26.00
  • Výška
    80.00
Community
Discussions
Rate&
Review

Napište vlastní recenzi

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Really strong, secure mount. disappointed though because it came with 3 of the right screws and a different one that didnt fit
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I can't understand the 5 crown ratings given so far, and they made me buy this mount.
It looks good is light, but not strong...
Used one on a bixler with a 100g motor and on a radjet 800 with a 80g motor. Both mounts bent after a normal landing just from the weight of the motor. As you can see on the pic above, there is no counter triangle in the joining of motor-plate and stick-holding. And for sure this is the weakest part of the whole mount. Easy to bend by hand, still using them as they still didn't break after several re-adjustments after each landing...
Very dissappointing. Sure 2$ is not much but I'd rather pay 5-10$ for a strong long lasting mount, this one will break very soon.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Take care not to stress this mount. The 90 deg joint will crack and break as the alloy is cast.

This mount is best only used with light motors and should be regarded as on par with a good plastic mount only in terms of strength.

verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
take a good look at the picture (mount with 10mm measurement). you see the 2 holes that are next to the weld that the bolts or screws go through?! the holes are drilled too close to the welded angle which makes it difficult to torque the bolt down. the bolt head will be elevated resting on the angle of the mount. it is very poorly drilled and quality is bad. it will still work but really looks bad and sloppy. use loctite!! i bought the black mounts and they work extremely well. drilled holes are spaced properly apart. up to YOU!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
easy to use, great for foam wing.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Awesome stick mount, quality build, rigid, and I've mounted an EDF motor on mine to push a 5x5 prop - should be a screamer!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Looks strong. They included longer screws that in the picture and the main part has threads. Very good.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
motor reviewed here on a HK Parkjet that does 100mph!
http://www.youtube.com/watch?v=LYz2QA8CEFU

On a TGS Sport 4.5x4.5e it pulls 43a at 10.7v without overheating
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
It broken from the bend at first usage. Not strong enough!! I strongly recommend you to strengthen it at the bend, before use...
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I used this to mount C10 Micro brushless outrunner 2100kv and it fits perfectly! 5 stars!



verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Štítky produktu

Štítky oddělujte mezerou. Víceslovné uzavřete v apostrofech (').