Aluminum Lower Suspension Arm Bracket (front/rear) - A2003T, A2010 and A3007
Hmotnost ( g )
These arms are a need for the buggyReally nice upgrade. Fits like a glove and well machined.So these are cheap, and the metal finishing is good. It would be a great product if the rear bracket was usable on the A2003T. The problem is to begin with that the inner holes are not thoroughly drilled through, you'll have to finish that with a (wasted) screw. Secondly, the lower two holes are off by about 1 mm from the standard part, i e you cannot mount it. Haven't tried the front bracket yet.Ligher than the meatal originals, which is a good weight reduction if you added other aluminum products like towers carriers, and arms.A remarkable tuning for HK Car. And much cheaper than similar or 3m from GPM Racing!