Aomway new Mini 600 TV lines camera with built in microphone is the perfect plug and play Camera for Mini’s to large models looking for a small but yet quality camera made for FPV applications.
The camera has a shielded A/V cable and standardized 5 pin connector that is plug and play with most video transmitters. The CMOS FPV tuned sensor is great in all light conditions and even comes with a lens adapter if you want to change the FOV.
Fatshark and Aomway direct matched plug (5V)
Built in microphone
Shielded A/V cable
Mini Sized at just 15x15x23mm
Image sensor: CMOS
TV system : Pal
Horizontal resolution: 600TVL
Usable illumination: 0.5Lux
Scanning system : NTSC:575lines, 60Field/S Pal: 625Lines, 50Fied/S
Cable length: 25cm
Size : 15mm*15mm*5mm
Connector: JST: suit for AOMWAY 5.8G 200MW mini Transmitter Dupont: suit for the AOMWAY 5.8G 1w, 500mw transmitter, Fatshark transmitter, Immersion transmitter. Not for the Boscam transmitter (12v VS 5v)
*Note this is a 5V camera, please verify voltage as some video TX output 12v for the camera via the 5 pin connector.
Kapacita ( mAh )
Hmotnost ( g )
Nice little camera, worth this money.Lens cap include, but not shown on photos.Live feed is ok, pic quality is normal for this type of camera.Well it's cheap and it works, but for FPV its pretty useless IMO. The dynamic range is awful and I pretty much can't see anything if I'm looking at any part of the sky - everything fades to black. The only time anything is clear is when the copter is on the ground or the camera is pointed at the ground. The cable is a pain as well. It's large, inflexible and sticks out the side ready to knock into your props. There is also no connector plug on the camera - the cable is built in so you are basically stick with it.
I bought it because it was cheap, but I have actually wasted $15.Mine is a total dud, first the mic doesn't work, I only get crackling. The extra fov thing doesn't work, the camera won't come into focus at all with it installed. My case is also slightly separated where the mic is installed. Overall not happyI have given two stars for this product because it comes with a big fat connector that will not plug straight in to the Aomway vTx. To get that feature you must buy the combo that is out of stock. It was fairly much a moot point because mine does not work but because you have to cut the lead it is not possible to do a warranty claim. I have ordered two more in the hope that I get a good one.I have use it with a HK Micro UBEC 3A/5v on my Arkbird OSD and it is works perfect I love this tiny camera, its only weights 12 grams and it is so smallImage quality good for the price. Not as good as traditional board camera or FS, but reasonable.wow this little camera surprised me , its supper small but great video , the little round thing is to lock in your focus and the big one is to change your fov as described