Registrovat

Product Finder

Nastavení

Useful links

 
[["US","AU","GB","DE"]]
Registrovat
Shipped From:
  • Global
  • USA

Assault 450L Flybarless 3D Helicopter Kit

Assault 450L Flybarless 3D Helicopter Kit

QTY:

Now save Uložit 0,00 € 0,00 €

89,65 €
Stock:
Váha:
1365 g
SKU:
9155000263-0

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Price War

If you've seen a product elsewhere for a better price, please let us know! HobbyKing pride themselves on offering the best price, so if there if you see something cheaper elsewhere, let us know!

Combine

essential items and
esc
battery
servo
motor
acc
Popis
produktu

The Assault 450L assembly kit follows on from the already popular range of Assault 450 helicopters. It features a range of improved and upgraded parts whilst retaining the functionalilty and quality that you have come to expect from this superb range of helicopters. Even more of those fantastic CNC machined aluminum parts with many of them anodised an eye catching green.

Some of these improved features are as follows:

• Helical pinion and main drive gear for reduced slop and wear
• Longer tail boom (385mm), this is 40mm longer than the earlier versions
• Larger main rotor diameter (will accept up to 360mm rotor blades)
• Larger tailrotor diameter (67mm tail blades)
• Re-designed and improved carbon side frames
• Tail is torque tube driven for improved tail response
• More parts are CNC machined from aluminum and less are molded nylon
• Improved rotor head and swashplate system
• Fully CNC machined tailrotor gearbox with nylon bevel gears
• CNC machined aluminum motor mount
• Quick release sliding battery tray

The list goes on and are too numerous to mention here but there is one more that is a little different, the 450L has a CNC machined tail servo mount fitted between the main frames under the tailboom. This stiffens the frame at this point and also gives a nice straight linkage to the tail. It has also been made large enough to carry the slightly larger and stronger tail servos that are on the market today.

Specs:
Type: Collective pitch flybarless 3D helicopter
Main Rotor Diameter: 755mm
Tail Rotor Diameter: 175mm
Main Gear: 130T
Pinion Gear: 11T
Main Gear Ratio: 11.82
Length: 765mm
Height: 205mm
Weight: 410g (frame only)

Included:
Assault 450L assembly kit
Tail rotor blades
Blade support caddy
Cable ties and assembly hardware
Helical motor pinion (11T)
Assembly manual

Required:
3 x High torque metal geared mini servos (max length 24mm)
1 x High speed tail rotor servo (max length 36.5mm)
1 x Flybarless system
1 x 450 size brushless helicopter motor (1700~2100Kv)
1 x 2200mah 3S LiPoly battery
1 x 40~60amp ESC
1pr Main rotor blades (max 335mm)
1 x 6ch Transmitter and receiver
1 x Charger for 3S LiPoly batteries

NOTE: For a full listing of spare parts click here

Product
Specifications

Další informace

  • SKU:
    9155000263-0
  • Brand:
    nedefinováno
  • Hmotnost ( g )
    1365.00
  • Délka
    470.00
  • Width:
    110.00
  • Výška:
    160.00
Community
Discussions
Rate&
Review

Napište vlastní recenzi

Only registered users can write reviews. Please, sign in or sign up

Quality
Value
Overall
Dont waste your $ on any other 450 kit. I did and just found this 450L is way way superior kit. Why? Canopy is FG. Frame is assembled and even the frame sharp edges are smooth. Shipping was 4 days and low cost. So 6s or 3s build is up to you. What a nice kit @ 1/3 the cost.
Quality
Value
Overall
Quality
Value
Overall
Couldn't wish for better. It's fantastic value and quality.
Quality
Value
Overall
Quality
Value
Overall
Have assembled it and have to say it is much better than older 450 PRO helis. Great improvement from GARTT production... The only "problem" that isn't realy a problem but a must do is mesh well all TT umbrella gaers with apropriate shims to make them fit well, but not too tight eather - like all gears in general... All the rest was OK, use threadloch everywhere and grease on thrust bearings main head grips and tail grips as well. Wil tell more after first few flights... Bye
Quality
Value
Overall
Quality
Value
Overall
Finally got this bird up in the air and after building it and flying I can say the quality is great. Everything fit together nicely. I always pull all the screws out of the preassembled parts and they were mostly thread locked so I probably would have been ok not doing this. flying was perfect, I didn't have to adjust anything after the 1st flight, everything was just spot on after setup on the bench. I used the ZYX - S2 and it held solid. This is a quite a difference from the HK kits on this site as I had to buy a lot of Align parts for the tail and a new swash as its quality was quite poor (RIP).
Quality
Value
Overall
Quality
Value
Overall
il miglior elicottero classe 450 lavorazione perfetta piccolo neo viti un po deboli e alcune con testa torx
Quality
Value
Overall
Quality
Value
Overall
good I like it was abit battered by the post but all parts were ok
Quality
Value
Overall
Quality
Value
Overall
I just got my package today. Took it out of the box and I can tell you right now, very high quality! It is by far, one of the best craftsmanship work I have seen on a heli. Fantastic job HK!!!!! My favorite place to order everything I need for my heli's. Do yourself a favor, get one, you will not regret it!
Quality
Value
Overall
Quality
Value
Overall
seemingly nice product, which was quite fun to assemble. most parts were already put together, but take these apart, and check for proper lubrication and loctite.

the overall quality is ok, but there are a few bad parts:
- the ball links are finished quite poorly and look a bit soft. also the ball links on the tail control rod tend to bind.
- the main gear is made of low quality plastic, it started showing wear on the first spool (even though i checked the motor gear mesh three times)
- also, most gears look cheap, especially the umbrella gears for the TT drive
- the dfc arms tend to bind to the blade grips
- the canopy is a bit of a slapdash job, a little misshapen with painting blemishes (but nice enough for the money)
- one of the TT bearings wobbles when rotated

i suggest replacing all gears asap, and double (triple) check everyting for binding and unwanted shifting. my maiden finished with a bad crash caused by a TT umbrella gear shifting, getting chewed up, and me losing tail control totally. (2 servos broken, tail boom bent, blades broken, main shaft bent, featherin shaft bent, etc)



Quality
Value
Overall
Quality
Value
Overall
Just received the Assault 450L For the price this kit is amazing. Excellent QC very impressed with this kit. Front and rear tail gears mesh really well very smooth rotation no rough spots. Tail is sweet thrust bearing in tail holder. The cf frame on mine is flawless. Even the cnc parts are great very little machine marks. Head and swash plate also of good quality.Fiber glass canopy has very nice finish. I'm telling you this kit is great. The only thing that you might consider replacing would be the main gear. That is all I will replace..
Quality
Value
Overall
Upload
Videos
  • Assault 450L Helicopter

Upload video
Upload
Files

Combine

essential items and
esc
battery
servo
motor
acc

Štítky produktu

Štítky oddělujte mezerou. Víceslovné uzavřete v apostrofech (').