Beautifully finished, this faithful replica of the famous ASW28 sport glider is an excellent performer and is superbly attractive with it's mirror finish gel-coat fibreglass frame making it also very agile and efficient.
Couple this glider with a folding propeller and brushless inrunner for long flight times.
Wing Span: 2530mm (99.6inch)
Weight: 1,100 ~ 1400g
Length: 1170mm (46inch)
Wing Area: 28.5dm2
Wing Loading: 38~49g/dm2
Airfoil: HQ 3015
Radio: 4 channel, 4 servos.
Motor Required: Inrunner or outrunner with a maximum diameter of 35mm
Spinner: 38~40mm Diameter. (If spinner is to sit off the fuselage by more than 7mm, a 38mm diameter spinner would continue the curve of the fuselage better.)Note;
Due to the length of the products box, this item can only be shipped EMS Express.
Orders for Air parcel may need to be upgraded to EMS Express at additional cost and time to the customer.
Please select EMS Express when checking out with this item.
Kapacita ( mAh )
Hmotnost ( g )
Wo bleibt die Qualittskontrolle? Auch mir wurde der Rumpf mit einem krummen Seitenleitwerk geliefert.
Where is the quality control? I, too, the hull with a curved vertical stabilizer was deliveredHOBBYKING should check the consigning, this came with the crooked tail but so crooked that he also noticed my dog. I put in a file with the foto.I can see how much money I have waste this timeHOBBYKING dovrebbe controllare i modelli che spedisce,questo arrivato con la coda storta ma cos storta che se ne accorto anche il mio cane.
Ho inserito un file con le foto.Vediamo quanti soldi devo rimmetterci questa voltaI received this glider a few month ago, and start to built it only now. When I receved it, and open the box, I was very happy: very good shape, as shown on the pictures, good quality body, good finition of the wood parts (wings and stab)
But as I started to built it, I am very desapointed to see that none of the parst can be join together, the holes do not cooresponds: the horizontal stab cannont be assembled with the vertical stab, the winglets cannot be assembled too in the wings, ther is no hole for cooling the engine and speed controler, some parts are missing, horn and clevis are very poor quality, etc...
it will fly, sure, but a lot of unexpected work and modifications to put it in good conditions of flying. It would be better that the construction wont be prepared !
I will write another review afetr make it flying.
Very desapointed by this low quality box. NOT FOR BEGINERbeau planeur en visuel!!!! mais la qualite n'est pas de mise. collage du conteplaque pour la mise en place du servo de direction coll de travers!!!!! cela a demande 4h00 de boulot pour la remise en place. merci HKOverall, it is the worst plane I have ever bought. It is a defected plane. This seems to be a known issue for sometimes, but HobbyKing elects to ignoring it and continues to sell them. The worst is that HobbyKing ignores the responsibility of selling bad stuff.
I agree with getting what you pay for, but cheap products mean bad quality, unreliable or bad performance, but cheap products should not be defective and malfunctions.
I contacted HobbyKing and they asked me to ship it back in my own cost. It would cost me USD$90.00 to shipping it back. The plane cost USD$ 99.00. Would you pay the $90.00 to ship back which isn't your fault?
HobbyKing should take the responsibility for all deflective products, because we (customers) pay HobbyKing as a middle man to deal with Chinese manufactures. We pay HobbyKing to take the low cost manufacture risks. This means HobbyKing doesn't do their job right. They are taking advantage from cheap labors and low cost manufactures; they are also taking advantages from selling around the world without worries of any consumer law.Planador muito bonito e voa bem, mas a montagem precisa de alguns ajustes. Cuidado com o montante do motor, precisa ser reforcado!Excellent plane, just make sure you fly on the forward mark of the CG and you will have no tip stall issues. My set up: Turnigy 3548 motor, hobbyking 60 amp sbec, 3000 mah 4 cell Lipo, 13x6.5 folding prop (goes vertical better than most gas planes at my club). Weight 4.3 lbs, flies fast and yes, there is still a warp in the fuse, but it is minor. I posted my review on the video tab.total crap every thing twisted and dont fit..... now waiting for more then 9 month to get a replaemen fuselage HK get your act togetherI can not say enough had things about this plane. This plane I received is defected.
The balsa frame inside the fuselage is completely misaligned. I try to return it, but HK said they will not pay for the shipping. See below. I live in USA and the return shipping cost is more than the plane cost. Now I am stuck.
Here is what HK wrote by Chris.
Thanks for contacting the HobbyKing Support Team.
Please kindly follow the returning instruction as shown, Thank you!
3) Do remember that NO postage refund will be available for faulty item. You are strongly advised to mail the returned item via the cheapest mailing method with tracking facilities
Once we have received your return, our warranty department will start inspection on the item and update report to your account. Please check your account later.
Thanks for emailing support.
If you have any other questions, please let me know.
HobbyKing Support Team
Dont forget to follow us on Twitter and Facebook for discounts and promotions!
curved vertical stabilizer download now [1873kb] No File Name download now [626kb] No File Name download now [1405kb] build download now [3215kb] manual build download now [3215kb] tutorial build download now [3215kb]