The AT6 warbird comes complete with brushless motor, ESC and all servos installed. Assembly of the AT6 wing, canopy and tail can be done in 15 minutes. Include your own battery and receiver to be ready for your first flight in under 30 minutes!Specifications:
Length: 720mm (28.34in)
Wing span: 890mm (35in)
Flying weight: 450g
Power system: 1250kv brushless outrunner
Propeller : 8x6
Battery: 2 cells 7.4V - 1300mAh Li-Po (Not included)
Battery compartment size: 73 x 50 x 26mmRequired:
Your own TX & RX
2 cells 7.4V 1300mAh 20C Li-Po
Hmotnost ( g )
tres belle forme pour cet avion de guerre les couleurs sont bien choisies
dommage que les hlices soient fragiles
il dcolle sur de courtes distances
les posts ne permettent pas de dire si le moteuret variateurs supportent les lipo 3 elementsbeautiful shape and colors
the stock propeller are too fragile
ESC and battery too small
nice to flyFirst maiden flight my AT6 today, It just fill with tremendous power with the my upgraded ver of 1450kv, 7x4 props, 1300Amh. You can chose it to be fast, slow, roll.. and not much trimming needed. Half throttle throughout 8min flight time. It was an awesome! Discovered that you need to gain power when hand launching,turning & landing with some power too!This plane love a little nose heavy, seems like 1300Amh is just right for the plane CG. Is Good price and EPO quality by HK. com'on guys what are you waitting for, just grap yourself this warbird and have FUN. Hope you guys enjoy the AT6 flight just like me! Happy Flying[em_thumb][em_smile]! 13 , ! . . 3 4.()
I received this with little damage other than the pilot seat being slightly cracked. Hinges on control surfaces are the best I've seen on HK planes. I'll replace the wheels with much larger ones for operation on grass. One star off for seemingly faulty ESC and no programming instructions.Truly a great plane, motor mount stick was loose on arrival, but 5 min epoxy fixed that, landing gear were barely rubber cemented in. Needed 21gr of lead weight in the cowl to balance, but other than that flies like a dream. No bad habits, glides in for final approach, I have been flying this plane since July, and in that time I have managed to only rip the landing gear off on a gental landing, and today, I broke my first prop, that is it for damage. Oh I switched to GWS 9050 props, I felt that the stock prop did not pull hard enough, did not have a watt meter at that time, just a gut feeling, but the 9050 prop works great. If you want a nice putting around plane, this is it. Flying mine on stock set up with 2 cell 1600's.Received in good condition except that pilot seat was broken (looks like that the reason was a defect in packaging - the foam has been broken by the weight of the plane and it moved during the transportation)
Materials and build quality are quite average:
* cowling is so thin that it breaks after the first hard landing
* chassis glue was weak (torn off after the first landing) and wheels tend to jam all the way
At the same time, the plane showed itself very durable and easy to fix.
Please note that for my experience this model is by no means a trainer - I do not recommend it as the first plane, only for those pilots who already have some experienceToday I bought products. The total weight of 2 kg from the cardboard box. I have 3 kg. fee I paid, I paid a fee in excess of $ 10.
Cracks were formed at the plane's wing, I repaired there, I pasted it.
I think one of the servos installed upside down, because the wire was short. I know this, but when the TX & RX.:
1. , , ;
2. XT60 () Turnigy, Zippy , .. - ( 18 noname).
All is include (just add receiver and lipo)